I was using GParted Live to resize my Windows XP partition on my desktop aaaaand... it rebooted properly and now says "no such partition" and won't boot from anything. It doesn't even recognize my dell utilities partition. I can boot to the GParted Live disk - and that is all. So I'm relatively certain that I just destroyed something
View 3 Replies
I have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
View 4 Replies View RelatedI have been using fedora 12 for quite some time. When i first installed Fedora on my new system i created 2 ntfs partitions on the hard disk using mkfs.ntfs and in the space at the end of the disk i have Fedora. recently i tried installing Win7 but it didnt recognise the partitions even tho they are NTFS. I had to format 1st partition from setup to install Win7. After boot i find that Win7 doesn't recognise the 2nd partition as welL. The partitions are working fine in Fedora.
View 14 Replies View RelatedI have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
I recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
View 9 Replies View RelatedI've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
View 4 Replies View RelatedI have daul boot systems on Dell computers. Dell includes a Utility partition on /dev/sda1 which you are supposed to be able to boot by pressing F12 when booting. I've tried various ways to boot into it. Most recently I put
title Dell Utility
rootnoverify (hd0,0)
chainloader +1
[code]....
GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
My boot partition doesn't have any space left, rendering me unable to install any updates. Most space in the boot directory (85 MB) is taken by the following files:
initrd.img-2.6.32-24-generic
initrd.img-2.6.32-26-generic
initrd.img-2.6.32-27-generic
initrd.img-2.6.32-28-generic
initrd.img-2.6.32-29-generic
initrd.img-2.6.32-30-generic
It seems to me that I�d need at most one of these. What exactly do (or did) these initial ramdisks do, and is it safe to delete them?
I am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
View 1 Replies View Relatedusing onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedCaused by Used fdisk to delete the windows partition, in my dual boot. Then I could no longer log in to ubuntu, the partition table was some how courpt and I couldnt remount I then decided to use the windows partitioner from windows setup, as I thought it is so stupid, to reformat the partition where I had ubuntu. I wanted reinstall ubuntu, and I know that during the setup I could straighten out the mess I'd made.
Windows has now installed two 8mb one cylinder partitions on my HD. When I start the PC I get a !disk error occurred Press Crlt Alt Del to restart! This happens everytime. HD boot sequence is buggered, i guess.
I can boot from other devices. USB + CD. How when I use the windows disk to boot up I can see the 2 8mb partition, which it wont let me delete. How can I delete this via linux?
Also when I try to install ubuntu from the usb drive, it stalls just after the Preparing to install part. The next screen is when you set the partition table, swap drive etc. When I quit I get the following error !Process Glib WARNING getpuuid_r() failed due to unknown id!
The usb_liveCD does however mount my hard disk partitions and luckily I have managed to back everything up to an external.
results from df
/var/log# df
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 766804 68140 698664 9% /
none 760892 244 760648 1% /dev
/dev/sdb1 3911856 712128 3199728 19% /cdrom
[Code].....
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies View RelatedWhen I installed Ubuntu on my system (a year or so ago) I forgot to add a BIOS Boot Partition. This is something of a problem considering that the partition type for my 2TB drive is GPT. Hence, whenever grub is updated I get a warning:
Code:
/usr/sbin/grub-setup: warn: This GPT partition label has no BIOS Boot Partition; embedding won't be possible!.
/usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and its use is discouraged..
Installation finished. No error reported.
[Code]....
If so, what is the rough sequence of commands to create the partition (without disturbing what is already there) and then setting it as a BIOS boot partition.
When I run out of space on my Ubuntu partition, which will probably happen with me being the untidy person I am, is there a way to resize the partition in Windows or Ubuntu that will allow the other to boot? As I've heard stories of using Gparted to resize a Windows partition doesn't allow Windows Vista to boot up as it removes a crucial part of the operating system? I have adequate space to give to Ubuntu on my NTFS partition. May I also add that to install Ubuntu I had to use the partitioner that came with the installer, because the Windows Disk Manager wouldn't let me partition the NTFS drive, because it Denied my Access.
View 4 Replies View RelatedRecently I reinstall Grub, but I have chosen on ntfs (windows 7 partition E: drive). After this I chosen /dev/sda which is correct boot partition.
Now Fedora 10 and Win 7 booth are working properly.
How can I get back my E: drive safely?
In Fedora 10 E: is not available, where as in Win7 it is available but asking for Format.
how to get back my E: partition which was chosen wrongly as boot partition.
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
View 2 Replies View RelatedI having a problem getting my grub loader to see one of my hard drives. I added a drive, and my grub loader lost track of where everything was. I couldn't get my old linux (Red Hat 9) so I installed SuSe on my new hard drive. But I need my be able to boot from my old hard drive because it has apps that only run on the earlier version. From /proc/partitions the old hard drive is sdd
major minor #blocks name
8 0 976762584 sda
8 1 2104483 sda1
8 2 20972857 sda2
[code]....
when I tried to install Fedora on my pc, I got this error message " Defined Root partition not created a / boot/efi partition. I am trying to install it on a seperate hd. My main one has windows xp pro, but I do not want to interfer with that at all?.
View 14 Replies View RelatedI want to install more than 3 linux distributions on single disk - my test machine.Is it possible to create boot partition on logical partition whitch resides in extended partition (and boot successfuly of course)?
My boot loader lives elswere (primary partition or MBR).
I have installed Ubuntu on my netbook, an early Eee PC, and the battery ran out of charge. I didn't know that however and turned on my netbook. It started booting up traditionally, but then it just spit out a whole bunch of code:Quote:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
[code]....
I installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
A while ago I successfully dual booted my system with Vista and Ubuntu. then Windows 7 came out and I wiped Vista off my laptop and installed Windows 7. The problem is that my laptop no long knows that there is a whole other operating system sitting on the hard disk and I can't access it. What can I do to fix this?
View 5 Replies View RelatedI have two hard drives, a 320GB and a 1.5TB. The first hard drive has two windows partitions. The first one is the main vista partition and the second one is one for factory restore (its an HP pavilion).
So wanted to install both ubuntu and ubuntu studio on the second hard drive, so I allocated about 1TB as an ntfs partition that I wanted to be accessible by both vista and ubuntu. So I have 400GB left for both distros. I have partitioned off two 40GB partitions for the two roots and I'm sharing one large home parititon and I put a swap partition at the end of the disk.
After I got through the second installation (ubuntu studio) vista no longer recognised the ntfs partition on the second disk. I thought maybe the install botched the boot sector, so I used testdisk to try to fix it, but it hasn't done any good. I do not want to format the second drive again because I have data on there I transferred over from an old hard drive before I installed ubuntu.
I tried to 'initialise' the disk in vista, but that just wiped the partition table so I had to fix that with testdisk on a live cd
Does anyone have any idea how i could possibly fix this problem or what winblows is thinking? I want to be able to read the partition in windows.
Code:
This is my first time to post a thread.I'm not native English-speaker,so my English is poor.And I wish you can understand what I mean.
I have used wubi for months.Today I decide to install Ubuntu 10.04 on my harddisk.I create a liveUSB to install 10.04.But the problem during installing is when partition detecting,the windows partition can't be detected.It shows 'Ubuntu' on /dev/sda1,but in fact it is the windows partition.I ignore it and go on.After all done,10.04 can work well,but windows can't be booted.
Then I try to use 9.04 CD to install,and it shows 'Widows NT/2000/XP' on /dev/sda1 correctly.At last,both 9.04 and windows xp can be booted.
Is it the problem involving the difference between CD and liveUSB,or 10.04 and 9.04?
Can you tell me why and give me a hand?
How do you make Windows 7 see my Linux partition in it. I want to run some mp3s and avi's from Windows 7.
View 9 Replies View RelatedSo I am experimenting with other linux distros.....I just installed a small partition with OpenGEU, the one still based on Ubuntu.....now it wont recognize Mint. Ubuntu Studio is next on my list, but before I invest any more work I want to make sure I can add more partitions to grub, not just the most recent linux partition...
I think that future distros of linux should have a fix for this....if you install linux it should detect every other operating system on the disk, not just windows plus the most recent linux install.
install /boot separate? I always create a / and /home partition but never separate boot. Does that make life easier?
I'm trying to install Ubuntu 10.10 on my WinXP desktop computer. I used the LiveCD and manually configured the partitions. I resized my XP partition (the entire SATA HDD) and created a 37GB partition for Ubuntu, as well as a 3GB swap file. I installed the boot loader on the Ubuntu partition. But BIOS doesn't recognize that the drive has separate partitions, and I can't boot into it from Windows either. I know I didn't modify WinXP's MBR, but should I have? I didn't know where it was.
I booted into the LiveCD again, and went into the disk manager. I Edited the Ubuntu partition and saw a checkbox that said "Bootable". I checked it and hit apply, hoping that might do it. I waited twenty minutes and the little circle was still spinning with no indication that it was actually doing anything or any warning of how long it would take, so I rebooted. Still no luck.
Someone told me that Ubuntu sometimes won't be bootable if you have both SATA and PATA drives in the system, which I do (although both XP and Ubuntu are on the same, SATA drive) and gave me a page that told me to use Grub4Dos. I fiddled around with that, only to come onto the Ubuntu website and find out that the page they gave me was outdated, before Ubuntu used GRUB2.
I'm using an Intel-based macbook, I made a new partition with BootCamp, after that I inserted debian installation CD, deleted the FAT32 partition that was made by BootCamp, made 3 new partitions:
/ ex3
/home ex3
and a swap partition,
after installing debian, I restarted macbook, but it couldn't recognize linux partitions, in Mac OSx I can't find any of these partitions as startup disks, and I can't mount them in Disk Utility, How can I access these partitions? how can I boot to debian?
