I had Windows 7 ultimate installed on my netbook and installed Ubuntu 10.10 using the 'Install alongside other OS's' option which put windows onto another partition and created one for ubuntu.
Anyway I've tried reinstalling the grub but I never get a grub boot menu when I boot it up and the grub won't recognize the windows install
I recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
View 9 Replies View RelatedI have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
So I am experimenting with other linux distros.....I just installed a small partition with OpenGEU, the one still based on Ubuntu.....now it wont recognize Mint. Ubuntu Studio is next on my list, but before I invest any more work I want to make sure I can add more partitions to grub, not just the most recent linux partition...
I think that future distros of linux should have a fix for this....if you install linux it should detect every other operating system on the disk, not just windows plus the most recent linux install.
install /boot separate? I always create a / and /home partition but never separate boot. Does that make life easier?
i can't boot up my win XP after installing Ubuntu 10.10.
I decided to replace my Vista partition with Ubuntu 10.10 so i redo my partitions and split the current Vista partition to a swap and root partition and install Ubuntu 10.10
Everything went well and i got Ubuntu up and running. However, i realize that GRUB 2 didn't recognize my existing windows partition. I double-check on grub.cfg and see that the default os_prober didn't recognize my XP partition either.
After search on the internet for a while, i found many similar issue where most are fix when manually adding the entry yourself so i decided to add an entry 11_XP under /ect/grub.d/ for windows XP and confirm that the new entry are added to the update grub.cfg file before restarting
Code:
### BEGIN /etc/grub.d/11_XP ###
menuentry "Windows XP" {
set root=(hd0,5)
insmod chain
drivemap -s (hd0)
[Code].....
This is my first time to post a thread.I'm not native English-speaker,so my English is poor.And I wish you can understand what I mean.
I have used wubi for months.Today I decide to install Ubuntu 10.04 on my harddisk.I create a liveUSB to install 10.04.But the problem during installing is when partition detecting,the windows partition can't be detected.It shows 'Ubuntu' on /dev/sda1,but in fact it is the windows partition.I ignore it and go on.After all done,10.04 can work well,but windows can't be booted.
Then I try to use 9.04 CD to install,and it shows 'Widows NT/2000/XP' on /dev/sda1 correctly.At last,both 9.04 and windows xp can be booted.
Is it the problem involving the difference between CD and liveUSB,or 10.04 and 9.04?
Can you tell me why and give me a hand?
My computer is currently dual boot: Windows 2000 on first hard drive (master) and Ubuntu 9.10 on the second hard drive (slave) using GRUB 2. Both drives are on the first IDE channel. I have a third drive with a DVD/CD drive on the second IDE channel (master and slave respectively). The only thing on this drive is my photo library, which is backed up on a server.If I were to temporarily remove the plug for the first two drives from the mother board and plug the third hard drive and DVD drive into the first IDE channel and install Windows XP on the third hard drive from the CD ROM, I would have a functioning Windows XP computer with just the hard drive and CD/DVD drive. The system would not know of the existence of the dual-boot configuration.
Now the question: Obviously, if I plug the drives back in the way they were originally, I will not have the choice on GRUB to boot into Windows XP on the third hard drive on the second IDE channel. When running from Ubuntu, can I do a GRUB update, and will it recognise the new Windows XP drive as a bootable option in the GRUB menu?I really don't want to take the chance of destroying my current dual-boot configuration (Win 2000/Ubuntu 9.10) by installing Windows XP on the third drive with the first two drives plugged in.I don't really want to take the time to experiment if there's no chance that GRUB will recognise the new Windows drive.I know. I'm a little old-fashioned. But when all my applications work fine on both platforms with the hardware
I've just installed a second hard drive in my laptop with windows 7 on one drive and Ubuntu on the other. I selected the side-by-side install in the Ubuntu install and let Ubuntu do the rest. Unfortunately Grub isn't seeing the windows install even after reconfiguring grub. However, the windows 7 drive is visible in Ubuntu and all the windows files are there intact.
Does anyone know how I can make grub see Windows 7 so I can boot into it?
I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
View 4 Replies View RelatedI was defraging windows xp and the power want off now I can only boot into ubuntu from Grub.
View 3 Replies View RelatedI just installed ubuntu on a partition on my laptop that already had a windows7 partition. First I had Kubuntu installed, but I decided to just try Ubuntu instead. I did things the right way when I installed Kubuntu and I could switch between OSes on reboot. Then when I installed Ubuntu I accidentally put grub on /dev/sda1 instead of /dev/sda. I didn't even notice for a while because I never felt like I needed to go back to Windows until I felt like playing starcraft 2. That's when I noticed that when the boot options screen appears and I select Windows, the screen goes black, a cursor flashes in the upper left corner for about a second, then the boot options screen reappears.
If I boot using my windows 7 cd and go into recovery, get a command prompt and type Bootrec.exe /FixMbr and Bootrec.exe /FixBoot, the options appear to complete successfully, but then when I reboot, I get a permanent flashing cursor.
If I follow that by inserting my parted magic cd and running testdisk and overwriting the mbr, I get back to the first situation where the boot options screen will appear, but the windows boot loader just returns me to the boot options screen. I can get into ubuntu, at least. Whenever I run testdisk I can't replace the boot with the backup boot because I'm pretty sure it's identical to the flawed one.
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View RelatedI tried to search around for a way to access my windows partition from within Linux. I was unable to mount the same using "mount" command. I read of a tool "ntfs-config" as well, this too didn't work for me.
Please share if anyone out there has an idea on how we can access the windows partition (NTFS) from within Ubuntu 10.10 Maverick.
[Code]...
I recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies View RelatedI have two partitions on my HDD. A Windows XP (hd0,2) and an Ubuntu 9.10 (hd0,1).I have been using the Windows mainly and ran a program that changes the HDD's serial number. Now when I boot up and Grub loads, I try to access the Windows partition and get the following error:
Error: No Such Device: 2e3857fb3857c08f
I am still able to boot the Ubuntu partition but can not seem to get grub to point to the Windows partition any more. This is very frustrating as I really need to get back into that partition soon.
I have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
Whilst in fedora i deleted files off my second hard drive to free up some space, i deleted over 10gb worth of data. When booting back in to my windows partition it doesnt recognize the free space instead it thinks the hard drive is still full even though i deleted the data.Not to sure as to why this has happened, as im sure i have deleted stuff of this hard drive before from my linux partition.Any help would be greatly appreciated as my 70gb hard drive is full with only 20gb of data to show for it
View 2 Replies View Relatedis it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies View RelatedI have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies View RelatedI need to reinstall my windows 7 partition, but I don't want to lose my ubuntu partition. Currently I just have both installed and grub is dealing with my booting options.Is there any way I can reinstall windows without messing up grub or my ubuntu partition?
View 5 Replies View RelatedI recently installed Ubuntu 11.4 and I want dual-boot machine. Before Ubuntu on machine was installed only windows7. Since I install Ubuntu I do not see Grub(or any other) boot loader. When I start computer it automatically boot Ubuntu without prompting choose OS menu.
How can I set grub2 to ask me this question?
Here is my partition configuration
Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
[Code].....
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
in my first start on fedora 13, with grub 0.97 did not recognize ubuntu licid, but recognizes winxp, now i try to change to grub 2 but, always begin whit grub1,
how i can replace grub1 by grub2 or how i can boot from grub2 of lucid?
I'm trying to install Ubuntu 10.10 on my WinXP desktop computer. I used the LiveCD and manually configured the partitions. I resized my XP partition (the entire SATA HDD) and created a 37GB partition for Ubuntu, as well as a 3GB swap file. I installed the boot loader on the Ubuntu partition. But BIOS doesn't recognize that the drive has separate partitions, and I can't boot into it from Windows either. I know I didn't modify WinXP's MBR, but should I have? I didn't know where it was.
I booted into the LiveCD again, and went into the disk manager. I Edited the Ubuntu partition and saw a checkbox that said "Bootable". I checked it and hit apply, hoping that might do it. I waited twenty minutes and the little circle was still spinning with no indication that it was actually doing anything or any warning of how long it would take, so I rebooted. Still no luck.
Someone told me that Ubuntu sometimes won't be bootable if you have both SATA and PATA drives in the system, which I do (although both XP and Ubuntu are on the same, SATA drive) and gave me a page that told me to use Grub4Dos. I fiddled around with that, only to come onto the Ubuntu website and find out that the page they gave me was outdated, before Ubuntu used GRUB2.
I have just installed Fedora 11 64bit on a new hard disk, using Intel 975BX2 motherbord, 3Gbyte RAM, 320Gbyte hard disk etc., USB mouse and keyboard. The installation went fine, but when I enter the password for the boot (I assume GRUB was installed) it fails to recognise the password. Do this three times and the boot segment ??? fails to initialise.
I recall a linux magazine i buy indicating that you have to copy and paste the password manually after installation, but i cannot recall the article date. Is this a problem - the password protection for the GRUB boot loader does not work at installation time when using the graphical interface ?. I did not use any odd characters - basic letters and numbers.
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
I installed maverick meerkat but for some reason there was no install to free space option so I installed onto 32gb of my 170gb windows vista installation. I NEED THAT INSTALLATION. Maverick Meerkat cannot detect my windows installation!
View 9 Replies View RelatedI'm trying to install Fedora 10 from a USB memory stick on which i've installed Fedora-10-x86_64-DVD.iso and, early in the process of configuring the installation, i get messages about both my IDE hard drives having unrecognizable partition tables:
"The partition table on device sda (... my disk data ...) was unreadable. To create new partitions it must be initialized, causing the loss of ALL DATA on this drive."
Same for sdb.
My PC currently runs Fedora Core 4 (yes i know i should have gotten around to upgrading my OS earlier) and yes it recognizes both hard drives just fine.
The answers I've found on the web suggest to backup my drives and repartition. I'm not too hot on that "solution".
explain why a F4 partition table is not recognized by F10?
BTW, I've recently upgraded my motherboard, processor, DVD drive, regrouped both my IDE drives on the same bus, ... I consider it a miracle F4 still runs on this PC (although F4 does not support the motherboard's graphics card, so no X11).
First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub.
Before I would have just edited menu.lst, but now?? I dunno.
edit; Here's fdisk with Fedora on sda6