Ubuntu :: Get The Message : File Not Found
Dec 29, 2010Under Place> Documents, Music,Videos, etc. I get the msg file not found. My son set this computer up for me.
View 1 RepliesUnder Place> Documents, Music,Videos, etc. I get the msg file not found. My son set this computer up for me.
View 1 RepliesI want to change File NOT FOUND ERROR MESSAGE to my own message buw how come I do this by terminal ?
View 3 Replies View RelatedI downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I faced a problem while installing ubuntu 10.04 on mylaptop;i downloaded the ubuntu from ubuntu official site. Problem: message coming that no media device is found for live file system. My Laptop configuration : 2.2 ghz core 2 duo processor, 320gb hdd in this matter and can let me know me how can i install ubuntu 10.04 on my laptop.
View 4 Replies View Relatedi am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies View RelatedI am trying to compile meep (http://ab-initio.mit.edu/wiki/index.php/Meep) with MPI (openmpi) on a RHEL machine. I was able to build the binaries, but when I try to execute it, this error message comes up. I don't know which file libguile is missing. It was installed from the official rpm repository cdrom.
ERROR: In procedure dynamic-link:
ERROR: file: "libguilereadline-v-17", message: "file not found"
The last lines of the strace massage says:
access("/usr/lib/libguilereadline-v-17.so", R_OK) = 0
open("/usr/lib/libguilereadline-v-17.so", O_RDONLY) = 16
read(16, "177ELF111331`21004"..., 832) = 832
[code].....
I'm getting the following error message during make of MySQL server on Ubuntu,sys/signalfd.h not found
View 4 Replies View RelatedThe last few times, I booted ubuntu, the automatic disk check ran and told me that there were "serious errors on /". This had happened once before but that time, I found nothing wrong on booting into ubuntu. However, this time, the scan doesn't seem to progress any further after detecting the error. What is the problem?
View 7 Replies View RelatedI installed lighttpd to be able to view cgi files that display the status of my UPS. For the most part is has worked w/o incident i.e. until recently when the UPS battery failed on my APC backups xs 1500 lcd. I could not view the multimon.cgi file via the localhost or 127.0.0.1 url e.g.: [URL]... I'd get 404 page not found message. After checking links here and on the web, I tried: [URL]... The page is displayed. From this discovery, I'm not sure that this is a web server configuration or a network host configuration issue or what. I'm running Lucid with all updates, no mods to lighttpd except I added the mod_fastcgi line to the lighttpd.conf file
View 7 Replies View RelatedI'm getting the following message when attempting to install or upgrade a package. Not sure if it's a bug or not, which is why I'm hesitating to file it as a bug.
For example (note line /bin/sh: 1: /usr/bin/apt-listdifferences: not found):
Code: Select alldebian@Debian:~$ sudo aptitude install angband zangband moria
The following NEW packages will be installed:
 angband angband-data{a} moria zangband zangband-data{a}
0 packages upgraded, 5 newly installed, 0 to remove and 49 not upgraded.
Need to get 5,240 kB of archives. After unpacking 13.0 MB will be used.
[Code] ....
I installed fedora 11 and configured xdsl(pppoe). I then performed an upgrade and installed some apps. Internet still worked before the restart.After that even though i could activate the device, i cannot view websites. I get a server not found error message. I have tried using both firefox and konqueror. Internet works in windowsIs this due to the upgrade? If so which upgrade would have caused the error?How do i resolve it
View 4 Replies View RelatedI'm running slackware64-current and have no problems building packages from .SlackBuild scripts except for GCC. When I build the package there are no errors but I get a message saying - "No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like." The created package contains only directories - Creating Slackware package: /tmp/gcc-objc-4.4.3-x86_64-2.txz
[Code]...
I am using debian on kernel 2.6.38-2-amd64 with Kde 4 and I have one sound card integrated on my mother board (Asus A8N32-Sli Deluxe) with Nvidia CK804.
Often when I start debian I get a message that sound card wasn't found, therefore from the Konsole I have to reload the as:
xxxx@debian:~$ sudo alsa reload
Unloading ALSA sound driver modules: snd-intel8x0 snd-ac97-codec snd-mpu401 snd-gina20 snd-pcm-oss snd-mixer-oss snd-mpu401-uart snd-pcm snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-timer snd-seq-device snd-page-alloc.
[Code].....
I'm trying to install kmplayer-0.10.0c and im using Fedora 9. when i tried to install the kmplayer-0.10.0c using the command ./configure i received this error msg "The important program kde-config was not found!. Please check whether you installed KDE correctly." Kindly help how to solve this error msg.
View 2 Replies View RelatedIt seems to be related to some kind of gcc library missing, but I went into YAST and I've installed the kernel sources, headers, devel, and a bunch of other things I found in various forums. I consistently get an error message about GLIBC_2.11 not found, even if I just do gcc -v. Contents of config.log:
[code]....
I recently decided to install Ubuntu on a couple of computers without CD drives (netbooks), so I followed these instructions to create a bootable flash drive: http:[url].....That worked fine for both netbooks. Now I'm trying to use the same flash drive on a desktop currently running Windows Vista, but get his message when I try to boot from the flash drive:
No DEFAULT or UI configuration directive found!I tried to boot one of the netbooks from the flash drive again and that still works.I'm thinking a BIOS setting.
I have just installed Debian 8 with Gnome desktop and trying to add my username to sudoers list.
When I open terminal and enter visudo I get the following error message...
Code: Select allfracmo2000@debian:~$ su
Password:
root@debian:/home/fracmo2000# visudo
bash: visudo: command not found
root@debian:/home/fracmo2000#
Although I am quite new to debian, I have done this successfully in the past so not sure why this is happening?
I am trying to Upgrade from Fedora 12 to Fedora 13 using Preupgrade. My system downloads the the Upgrade and tries to install it but returns a message "Root of the previous system not found". I would really like to fix this problem but dont know how.
View 1 Replies View RelatedI need to use a pendrive with the Slackware 13.0 and I've tried a lot of things I've found at the internet but unfortunately they didn't work. It's not possible to use graphical interface because some reasons. So the problem need to be solved by command line.
When I use "lsusb" command, I can see the pendrive.
However, when I try these:
I got the following message: "Module usb-ohci not found" and "Module usbcore not found"
How can I deal with these problem? Because I guess without these module loaded it's not possible to mount the pendrive. Is it right?
I'm trying to write a script that will either tail or watch /var/log/messages for the words
PHP Code:
signal Gone into alarm state
From this line below.
I would then like the script execute:
And have run at start up.
I'm stuck with grep-ping only one word
PHP Code:
Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
I am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
I have a 20TB filesystem, xfs formatted. The filesystem has been mounted with the inode64 option, and I now need to NFS export it. NFS doesn't like the inode64 option at all. The NFS clients cannot access any of the directories with inode numbers exceeding the 32bit limit. They get the "Stale NFS file handle" message. I have tried to attach the filesystem to a RHEL5.3 system, and after turning on the no_subtree_check option in /etc/exports on the server, it all works fine. No changes were needed on the clients.
The problem is that I need to get this to work on a RHEL4.4 system. Unfortunately I cannot do any test on that system yet, I then did a quick test on a RHEL4.3 system... and it didn't work. Even using the no_subtree_check option was on any help. I am afraid that this will not work on the RHEL4.4 system either. How to get the inode64 xfs filesystem NFS exported on a 2.6.9 kernel?
How to install gufw? I could not find it when i clicked "install gufw" the message came as package not found.
View 2 Replies View RelatedAn update to the Pan Newsreader (0.134, "Wait for Me") is out as of February 15, 2011. This release is supposed to add some functionality as well as some bug fixes. Has anyone successfully installed from the source code? I have tried, but have not been successful. I get an error message about "GLIB" not being found. Does anyone know a site for which a .deb file for this can be downloaded?
View 6 Replies View RelatedWith a default 11.4 (64bit) install, selecting XFCE for the desktop environment I get the following appear in an "xmessage" window."GTK GUI wanted but not found, falling back to Qt".This appears whenever I click cancel in any YaST dialogs, the "Install/Remove Software" dialog from the XFCE menu.eg. Opening the YaST->Firewall dialog to check the current status of the firewall, then clicking cancelll show the "xmessage" window.Is this message harmless and my system is still ok ? It happens everytime with a XFCE install, I have reinstalled 11.4 several times to check
View 2 Replies View RelatedI want to load the package madwifi under opensuse from Index of /suse/11.1, but RealPlayer did not function correctly. The reason why I want to use madwifi is that I cannot start my internet with opensuse 11.1 using motherboard from asus with the ethernet adapter from Atheros AR 8121/AR8113 PCI-E Version 1.0.0.5. When I compile the delivered Linux drivers I got the failure message "Makefile:61: Linux kernel source not found". So I decided to take rpm from opensuse within madwifi. How/Where can I get the corrosponding madwifi elsewhere?
View 4 Replies View RelatedI have installed cpulimit tar archive software on my suse linux DesktopI can limit any process upto a max cpu percentage uses with its pid with below command.# cpulimit -p <pid> -l <percentage>It is working i have tested.But when i run this command for a executable script with following command# cpulinit -e /<path with script file> -l <percentage>it shows message "Warning: no target process found. Waiting for it." though thatscript is running at that time.what could be the issuse.How can i rectify that problem
View 2 Replies View Relatedwhen i try loading my printer software or home hub software i get a message saying "ERROR AUTORUN NOT FOUND" How do i sort it
View 3 Replies View Related