An update to the Pan Newsreader (0.134, "Wait for Me") is out as of February 15, 2011. This release is supposed to add some functionality as well as some bug fixes. Has anyone successfully installed from the source code? I have tried, but have not been successful. I get an error message about "GLIB" not being found. Does anyone know a site for which a .deb file for this can be downloaded?
View 6 Replies
My level is starter with Ubuntu. Moderate experience with C.Problem starting with programming in C under Ubuntu.I have installed Anjuta IDE and made this classical program.
#include "stdio.h"
main()
{
[code]....
checking what language compliance flags to pass to the C compiler...
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.16... yes
configure: error: glib-compile-schemas not found. < ---
1. How to determine what package glib-compile-schemas belongs to ?
2. Where to get the package ?
I'm basically trying to install Anjuta 3.0 and getting this error when I run ./configure
As root, type "zypper update" and get several lines of the following error:
**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
Loading repository data...
Reading installed packages...
Nothing to do. Used zypper dup to upgrade from 11.3. Still have boot problems (will open another thread), but had major problems upgrading timezone. File downloads would reach some percentage of completion, then B/s would slowly reduce, to zero. Upgrade would halt until manually aborted. Solution was to manually download 5 timezone files and install them in a directory repository. File download did not specify just the timezone file, but also a part of the directory. Could this be part of the problem? example: ./rpm/i586/timezone-2011d-0.2.1.i586.rpm instead of just the file name.System is a Dell 3000 (Pentium 4, 512MB memory).
I'm getting the following error message during make of MySQL server on Ubuntu,sys/signalfd.h not found
View 4 Replies View RelatedI installed lighttpd to be able to view cgi files that display the status of my UPS. For the most part is has worked w/o incident i.e. until recently when the UPS battery failed on my APC backups xs 1500 lcd. I could not view the multimon.cgi file via the localhost or 127.0.0.1 url e.g.: [URL]... I'd get 404 page not found message. After checking links here and on the web, I tried: [URL]... The page is displayed. From this discovery, I'm not sure that this is a web server configuration or a network host configuration issue or what. I'm running Lucid with all updates, no mods to lighttpd except I added the mod_fastcgi line to the lighttpd.conf file
View 7 Replies View RelatedI want to change File NOT FOUND ERROR MESSAGE to my own message buw how come I do this by terminal ?
View 3 Replies View RelatedI installed fedora 11 and configured xdsl(pppoe). I then performed an upgrade and installed some apps. Internet still worked before the restart.After that even though i could activate the device, i cannot view websites. I get a server not found error message. I have tried using both firefox and konqueror. Internet works in windowsIs this due to the upgrade? If so which upgrade would have caused the error?How do i resolve it
View 4 Replies View RelatedI'm trying to install kmplayer-0.10.0c and im using Fedora 9. when i tried to install the kmplayer-0.10.0c using the command ./configure i received this error msg "The important program kde-config was not found!. Please check whether you installed KDE correctly." Kindly help how to solve this error msg.
View 2 Replies View RelatedIt seems to be related to some kind of gcc library missing, but I went into YAST and I've installed the kernel sources, headers, devel, and a bunch of other things I found in various forums. I consistently get an error message about GLIBC_2.11 not found, even if I just do gcc -v. Contents of config.log:
[code]....
I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I have just installed Debian 8 with Gnome desktop and trying to add my username to sudoers list.
When I open terminal and enter visudo I get the following error message...
Code: Select allfracmo2000@debian:~$ su
Password:
root@debian:/home/fracmo2000# visudo
bash: visudo: command not found
root@debian:/home/fracmo2000#
Although I am quite new to debian, I have done this successfully in the past so not sure why this is happening?
I installed cdroast that came with ubuntu and received the following:Warning: No root configuration file found or not readable!The superuser must start and configure X-CD-Roast first, before other users can use it.
I searched and found that the root configuration was turned off in some versions and uninstalled, then found a good version at http://www.xcdroast.org/ but when I tried to install from a *.tar.gz and after I ran a ./config.I downloaded glib-2.24.0.tar.gz and got a successful install, and I still receive the GLIB error. If the problem is GLIB_CONFIG environment variable, I do not know how to change that. I cannot locate glib-config either.
Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
Quote:
(gimp:4216): GLib-WARNING **: /build/buildd/glib2.0-2.28.6/./glib/goption.c:2132: ignoring no-arg, optional-arg or filename flags ( on option of type 0
segmentation fault
gimp stopped working on kubuntu after installing updates, any fix?
when i try loading my printer software or home hub software i get a message saying "ERROR AUTORUN NOT FOUND" How do i sort it
View 3 Replies View RelatedI'm getting this error when I try to login: GLib can't find the user in list [0] or something like that. This happens when I try to login using the graphical method. It logins properly when in failsafe mode. I'm using Lucid, and this happens after the hard drive load is shown in the splash screen following the login screen. It just jumps back to the login screen after this.
View 1 Replies View RelatedIm trying to install cUrlFtpFs. I get an error when run the configure file though, it says:************************************************** *checking for GLIB... configure: error: Package requirements (glib-2.0) were not met:No package 'glib-2.0' foundConsider adjusting the PKG_CONFIG_PATH environment variable if youinstalled software in a non-standard prefix.Alternatively, you may set the environment variables GLIB_CFLAGSand GLIB_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.***********************************************echo $PKG_CONFIG_PATHecho $GLIB_LIBSecho $GLIB_CFLAGS
View 1 Replies View RelatedOn my openSuSE 11.4 with GNome, zypper throws lots of errors when used on the command line.However, zypper does it's work correctly, but the error messages are annoying.Does anybody know what the problem is ?The error messages:
Code:
**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error ==
[code]....
I am trying to install a program called airfart and when I run make after cd'ing to the appropriate file i get this
Code:
g++ -g `pkg-config gtk+-2.0 --cflags` -o src/main.o -c src/main.cpp
Package gtk+-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `gtk+-2.0.pc'
[code]....
I have been having problems with Iceweasel. It freezes and freezes the entire computer too. I have to manually restart the computer.
I ran it from the terminal and right away I got this error:
GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
I am wondering if this has to do with it freezing.
In my CentOS5.4 I need to install gtk+-2.12.2, it demands glib-2.22.3, and system has only glib-2.13.5I download and install glib-2.22.3 with command ./configure --prefix=/opt/glib-2.22.3 && make && make installDownloaded gtk+-2.12.2 and compiling like ./configure --prefix=/opt/gtk+-2.12.2 --with-glib=/opt/glib-2.22.3gives error:Requested 'glib-2.0 >= 2.13.5' but version of GLib is 2.12.3Consider adjusting the PKG_CONFIG_PATH environment variable if youinstalled software in a non-standard prefixI made $ export PKG_CONFIG_PATH=/opt/glib-2.22.3/bin:$PKG_CONFIG_PATHAnd please specify if here I have to write /opt/glib-2.22.3/bin or /opt/glib-2.22.3?and echo $PKG_CONFIG_PATH - I see my lib in $PKG_CONFIG_PATH
View 2 Replies View RelatedIn my CentOS5.4 I need to install gtk+-2.12.2, it demands glib-2.22.3, and system has only glib-2.13.5
I download and install glib-2.22.3 with command ./configure --prefix=/opt/glib-2.22.3 && make && make install
Downloaded gtk+-2.12.2 and compiling like ./configure --prefix=/opt/gtk+-2.12.2 --with-glib=/opt/glib-2.22.3
gives error:
I made $ export PKG_CONFIG_PATH=/opt/glib-2.22.3/bin:$PKG_CONFIG_PATH
And please specify if here I have to write /opt/glib-2.22.3/bin or /opt/glib-2.22.3?
And echo $PKG_CONFIG_PATH - I see my lib in $PKG_CONFIG_PATH
But still the same error.
I'm using Slackware 13.37 x64 (upgraded to slackware-current) and I have trouble compiling mysql workbench 5.2.34.
The error is:
Code:
scintilla-marshal.c:2:25: fatal error: glib-object.h: No such file or directory
But I have that glib-object.h file:
Code:
$ locate glib-object.h
/usr/include/glib-2.0/glib-object.h
This is when I try to compile version 5.2.27:
Code:
./PlatGTK.cxx:13:21: fatal error: gdk/gdk.h: No such file or directory
Code:
$ locate gdk.h
/usr/include/gtk-1.2/gdk/gdk.h
/usr/include/gtk-2.0/gdk/gdk.h
I have slackware 64 13.37 Kernel 2.6.37.6 I am trying to install notifcation daemon so I can use notify-send. I am trying to install the package notification-daemon, via sbopkg using the 13.37 repository. I have installed dependencies: ORBit2, GConf, libsexy.I hit this error during installation of notification-daemon.
/usr/lib/libdbus-glib-1.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
I did previously have gsb gnome 3 installed, but removed that and then lost notify-send.
My recent issue is that when i start firefox 3.6.7 OS 9.10 is that the terminal will pop up and have this error: (firefox-bin:2690): GLib-WARNING **: g_set_prgname() called multiple times. I can only have firefox running when the terminal is running.If I close the terminal firefox will close as well
View 2 Replies View RelatedI am trying to build Pidgin on my Lucid install and on running configure, I get the following:
Quote:
configure: error: You must have GLib 2.4.0 or newer development headers installed to build.
If you have these installed already you may need to install pkg-config so I can find them. I tried installing pkg-config, but it's already in its newest version. I then tried going to the following website
[URL]
and downloaded and extracted glib on my computer. That changed nothing. I was hoping someone could tell me what's going on here. I just tried the this:
Quote:
sudo apt-get install libgtk2.0-0
and got
Quote:
libgtk2.0-0 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
"(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)"
It comes after choosing language, when the Ubuntu start-up logo shows with the 5 dut under it. I am trying to install Ubuntu Netbook on a little Compaq Mini.
When i try to install Ubuntu 11.04 or try without installing i get graphics like this:[URL] same with older versions, and on older versions i used to get this error: (process:257):GLib-Warning**:getpwuid_r():failed due to unknown user id(0) but on new version it dosent appear. My graphics card is: GeForce 7600GT MSI.
View 3 Replies View Related
