I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I want to change File NOT FOUND ERROR MESSAGE to my own message buw how come I do this by terminal ?
View 3 Replies View RelatedI am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
I have just installed Debian 8 with Gnome desktop and trying to add my username to sudoers list.
When I open terminal and enter visudo I get the following error message...
Code: Select allfracmo2000@debian:~$ su
Password:
root@debian:/home/fracmo2000# visudo
bash: visudo: command not found
root@debian:/home/fracmo2000#
Although I am quite new to debian, I have done this successfully in the past so not sure why this is happening?
I am trying to install rails 3.0.1 on ubuntu 10.10. I am getting this error towards the end when i execute this command sudo gem install rails --version 3.0.1.
View 1 Replies View RelatedWhile installing fedora 14 from DVD, during the installing process started half way, the error message appear on the screen " The file ed-1.4-2.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. " I have download the fedora 14 iso twice the same problem i got while installing. I install fedora 10 or 11 it install successfully.
View 7 Replies View RelatedWhen I go to try to install madwifi in the terminal I get the following error message after typing the make command.
Checking requirements... ok.
Checking kernel configuration... ok.
make -C /lib/modules/2.6.26.8.tex3/build SUBDIRS=/usr/src/madwifi-0.9.4-9pclos2007 modules
make[1]: Entering directory `/usr/src/linux-2.6.26.8.tex3'
Building modules, stage 2.
MODPOST 14 modules
make[1]: Leaving directory `/usr/src/linux-2.6.26.8.tex3'
make -C ./tools all || exit 1
make: *** ./tools: No such file or directory. Stop.
make: *** [tools] Error 1
I am running pclos 2009.
I can use Ubuntu from my flash drive, but I want to install it in a partition alongside windows. When I try to do this, I come to an 'allocate drive space' window, but whatever I do I get the error message: 'No root file system is defined. Please correct this from the partitioning menu.' I just don't know what this means, or what to do next. I'm loathe to ditch windows, and I don't want to have to use a flashdrive all the time.
View 3 Replies View RelatedI tried to install ffmpeg on 7.04(Fiesty Fawn). when i ran ./configure from terminal window, i got error regarding c compiler that unable to make executable file.
View 5 Replies View RelatedI am trying to install Qt4 designer using synaptic manager on my ubuntu machine but i am getting following error
View 1 Replies View RelatedI have a LiveCD (DVD with many linux versions on it) and no other software on my computer at the moment. The computer specs are as follow:
When I use the live cd I get the following message: Cannot find root file system
I have tried the suggestion along the lines of:
Then it either goes back to Bash or I get "Kernel panic - not syncing: Attempted to kill init"
Then my install just freezes there and I need to restart my computer.
I am trying to compile meep (http://ab-initio.mit.edu/wiki/index.php/Meep) with MPI (openmpi) on a RHEL machine. I was able to build the binaries, but when I try to execute it, this error message comes up. I don't know which file libguile is missing. It was installed from the official rpm repository cdrom.
ERROR: In procedure dynamic-link:
ERROR: file: "libguilereadline-v-17", message: "file not found"
The last lines of the strace massage says:
access("/usr/lib/libguilereadline-v-17.so", R_OK) = 0
open("/usr/lib/libguilereadline-v-17.so", O_RDONLY) = 16
read(16, "177ELF111331`21004"..., 832) = 832
[code].....
I am trying to reinstall ubuntu on my asus eee netbook. When I try to open ubuntu an error message appears saying that this file <windowsroot>system32hal.dll.> is corrupt or missing. How to I reinstall this file/what happened?
View 3 Replies View RelatedIv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies View RelatedI'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
I have had it with the frustration of trying to figure out how to successfully install grub on my own, so I am hitting the forums. What can you tell me about installing grub/grub2 (whichever is best -- I want something that works) to my single hard drive computer. Operating systems: Windows XP, xUbuntu 9.10 Hard drive: Samsung SATA 2, 1 TB Desired result: Menu that loads upon boot so that I can select which OS I would like to load without inserting media device or disk.
I thought this individual had the most straight forward and thorough tutorial (of any I have seen) on the subject but precluded at least one thing for me that I cannot afford to ignore: I don't seem to have a "stage1" that can be loaded by the grub shell. Trying to find it in /boot/grub/stage1 in the grub shell, I get... "Error 15: File not found" What I do have in that directory is 'grubenv'. When I boot up, it loads grub, but it comes up with an error message saying, "File not found". Then, all I get is the 'grub rescue' prompt: "grub rescue>".
Obviously, after spending hours on this thing, this is not the whole story. But there have been so many attempts to try fix it with one thing or another, that I cannot easily relate them all, if I could even remember each one.
I am getting an error message at step 5 of 8 in the installation process. I am using Ubuntu LiveCD. The caption of the error is 'No root file system' and the message itself says 'No root file system is defined.Please correct this from the partitioning menu.' I enclose a screenshot of this. I had also problems with booting Ubuntu and Windows after installing Ubuntu to an external hard disk so I probably have to also create a new boot menu (may be it is differently called, 'grub' possibly, I am not really sure).
View 1 Replies View RelatedTrying to launch Second Life gives the following error message:
You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux
This problem was easily found using search with solutions for Fedora 11.
The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.
The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.
"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."
Another post says that was all unnecessary as the following commands would do the same thing.
Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)
The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".
Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.
A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.
Iv been using ubuntu on my laptop for just over a year now and thought it about time my desktop got the same. I cant get rid of the vista section of the disk because of things i have on there so a friend gave me a spare 80gb hard drive to have a play with it and go from there. So first of all installed unbuntu 10.10 on the hard drive alls fine i can boot into both vista and ubuntu, i then want to install backtrack 4, so i booted the backtrack disc and off we went, i split the 80gb hard drive in two and installed backtrack to one section, now i cant boot to anything other than backtrack. I got an option for ubuntu although this does look different now (showing up as 'ubuntu, with linux 2.6.35-22-generic-pae') when i go to this option i get the message "error 15:file not found" I also have the option for other operating system, i get this message when i choose this option "error 11: Unrecognized device string"
View 1 Replies View RelatedUnder Place> Documents, Music,Videos, etc. I get the msg file not found. My son set this computer up for me.
View 1 Replies View RelatedI'm getting the following error message during make of MySQL server on Ubuntu,sys/signalfd.h not found
View 4 Replies View RelatedI've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
My problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies View RelatedHave a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
I'd like to install Ubuntu 10.10 in my laptop. So, I downloaded the iso file and burned into CD. I'd like to install into D drive since I use Windows Vista in C drive.
Below is the specification of my laptop.
Mobile AMD processor 2 G HZ, 1G RAM 32-bit Windows Vista Home basic
Harddisk C : 46 G (18giga free), D : 10 G (10giga free) How can I make partition and where should I start with, either Beginning or End of existing partition? SWAP? I watched a few videos but stlll can't grasp clearly how to do. I tried to boot w/ Live CD. But I didn't see the 4 different options: Try out without installing, Memory test, Ubuntu Disk test, Install Ubuntu, and Booting w/ harddisk. I had only 2 options; Try out w/o installing, Installing. Why is it so?
In addition, while booting w/ Live CD, I saw a message as following:
Error: b43.../firmware file not found.. something like this.. it was too fast to catch! However, I went on and show its desktop screen. May I not be able to install in my laptop? Does my laptop have any faulty disk or memory? I wonder. Finally, I use Wireless connection in the library so when I boot with Live CD, then internet is disconnected. Should I need to be connected before installing?
I've had my Ubuntu crash and had to reload it. I;ve reloaded 9.1 and am now getting the error
GRUB loading.
error: file not found
grub rescue>
I have tried a number of solution attempts I've found on the internet with no success.
I have Windows 7 also loaded however I'm not getting a Grub menu only the error above. I seem to have a number of Linux partitions I believe my correct one is on sda7. I had at one stage tried to have a boot partition on sda4.
Have searched around the web and here but can't find what package to load to solve the problem. Running 9.10
View 4 Replies View Relatedi have a dual boot system set up right now through wubi. the installation went fine. but then i tried to upgrade ubuntu from 10.04.2 to 10.10. the update went fine, no errors. but afterwards when i restarted my computer and selected ubuntu, it said "error: file not found" it didn't even get to grub. this has happened numerous of times trying to upgrade in the past.
p.s: i have vista installed as the other side of the dual boot.
If i compile my.tex file using the command:latex my.tex I am getting this error:! LaTeX Error: File `pause.sty' not found.Type X to quit or <RETURN> to proceed,or enter new name. (Default extension: sty)
View 1 Replies View RelatedIve installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
