OpenSUSE Network :: Failure Message "Makefile:61: Kernel Source Not Found"
Oct 3, 2010
I want to load the package madwifi under opensuse from Index of /suse/11.1, but RealPlayer did not function correctly. The reason why I want to use madwifi is that I cannot start my internet with opensuse 11.1 using motherboard from asus with the ethernet adapter from Atheros AR 8121/AR8113 PCI-E Version 1.0.0.5. When I compile the delivered Linux drivers I got the failure message "Makefile:61: Linux kernel source not found". So I decided to take rpm from opensuse within madwifi. How/Where can I get the corrosponding madwifi elsewhere?
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS removing old DKMS module vboxdrv version 3.1.6 Deleting module version: 3.1.6 completely from the DKMS tree. Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source -> /usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found at /lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12. code....
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I have made a full install of Slack 13.37.0. When I try to run the installer of the NVIDIA GF 8400GS card (NVIDIA-Linux-x86-180.29-pkg1.run) downloaded from [URL], I receive an error message. It says that the kernel source cannot be indetified/found. /lib/modules/2.6.37.6-smp/source and .../build links to /usr/src/linux-2.6.37.6-smp, which contains the full kernel source (can be compiled), including the header .h files in include/linux. The same NVIDIA installer can be run successfully on my previous Slack 11.
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
in directory a_dir, have a file named a_file.i can type "source a_file" under directory a_dir and execute successfully.but if i write the command to a Makefile under directory b_dir, the "source" function can't be executed well. it will generate some error message like this:
./a_file: line 1: setenv: command not found ./a_file: line 2: setenv: command not found ./a_file: line 3: setenv: command not found ./a_file: line 5: setenv: command not found
Makefile.in a file that is generated by tool, why it is in the source package? I am asking since , when I modified Makefile.am, I need to run automake to update the makefile.in, while I don't think this should be done manually.
I am trying to run a script to setup environment variables and then run other commands in a make file. But the source or the dot operator (shell is bash) does not seem to take any effect as the subsequent command didn't pick the environment up. Do I have to put every lines of the environment setup in the first script into the makefile instead?
I'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code: Failed to open a session for the virtual machine Win7Main. The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
I seem to be running into this issue a lot when installing various programs. I downloaded and installed a tar file (Linux Wacom Project. xf86-input-wacom-0.32.0 specifically) for my Bamboo tablet. Here's what I did:
Looks like everything went well here. But near the end I get this...
Code: Select allchecking for doxygen... no configure: WARNING: doxygen not found - documentation targets will be skipped checking for rint in -lm... yes checking for XORG... no configure: error: in `/home/mason/Desktop/xf86-input-wacom-0.32.0': configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.
Alternatively, you may set the environment variables XORG_CFLAGS and XORG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I didn't really pay attention to THAT until I do...
Code: Select allcd ~/Desktop/linuxwacom-0.8.8-6 ./configure --prefix=/usr make
Where in I get this error message after I enter in Code: Select allmake at the terminal
Code: Select allmake: *** No targets specified and no makefile found. Stop.
I'm using OpenSUSE11.2, and want to upgrade to OpenSUSE11.3 from internet. But there is not F4(Source) in boot menu. In my computer, F4 is keyboard menu. What shall I do?
I just installed OpenSUSE 11.4 x64 as a fresh full-install last week. Seems to be running great, up until the last couple days when I installed AVG. Every time I do a avgscan, it runs for 20 to 60 min, and then causes the PC to reboot. The only thing I can find is the following event in the /var/log/messages:
Code: May 1 11:45:01 linuxbox sntp[7653]: Started sntp May 1 11:45:59 linuxbox kernel: [38429.349995] iTCO_wdt: Unexpected close, not stopping watchdog! May 1 11:46:00 linuxbox kernel: [38430.111688] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[Code].....
I get this result every time I try to do a virus scan. I also have seen this result once when doing a large scp transfer from another Suse box. The AVG log just terminates and gives no warnings as to what's going wrong.
Are there any other logs I can check out to try to troubleshoot this further???
So I've been trying to get GIMP 2.7 installed on my Slackware64 13.0, but I'm having some issues. After some extensive finagling and dependence findings, I got it to configure correctly, however, the make fails with libtool trying to find libgdk_pixbuf-2.0.la:
libtool: link: cannot find the library '..//usr/lib64/pkgconfig/gdk-pixbuf/libgdk_pixbuf-2.0.la' or unhandled argument '..//usr/lib64/pkgconfig/gdk-pixbuf/libgdk_pixbuf-2.0.la'
libgdk_pixbuf-2.0.la is in /usr/lib64/pkgconfig/, but for whatever reason, editing the makefile doesn't change this. (Yes I have the right permissions to edit it). First of all, why is it searching for /usr in the top build directory, and second, why doesn't an edit of the makefile work?
im trying to install Squid clamav with squid(fedora11, 386MB, 2.6kernel)..i configured clamd and is working fine,(squid wrking fine) then i tried to install squidclamav via (yum -y install curl-devel).then i downloaded squidclamav-4.0.tar.gz and extracted.. then i run ./configure and then make.but make install command wont work; it shows an error.
Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy. Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.
Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.
I have xubuntu 9.10 and I'm trying to install iw-0.9.19.When I use the command "make" I get this error:
/bin/sh: pkg-config: not found /bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop. I read the Readme file and it says: "To build IW, just enter make. If that fails, set the PKG_CONFIG_PATH environment variable to allow the Makefile to find libnl". I guess the problem is linking Makefile (in iw-0.9.19 directory) to libnl (version 1.1 correctly installed on xubuntu) via pkg_config_file.
I'm trying to load drivers from .tar.bz2 file. I got the .tar opened and extracted to directory ABC. When I try to CD to that directory, I get a message the directory does not exist even tho' I'm looking right at it and the ls command shows it. The full path is user/downloads.ABC.
When I try to run the next command $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz I get a message Ubuntu 10.04 cannot find -xvzf. When I try to run the Makefile command locate in the same ABC directory, I again the error message cannot find Makefile.
I downloaded mesa from their git repository a few days ago then built it and installed it. I've tried removing it just now with "make uninstall", but that feature isn't in the makefile. How I can remove it?
probably an obvious error so I apologise in advance - trying to install vmware player, and it needs the kernel-source to build drivers. I've gone out and downloaded kernel-source for my running kernel.
However it's complaining that the kernel-source (2.6.31.12-0.1) does not match the running kernel (2.6.31.12-0.1-desktop).
Presumably there's something I need to do in order to get the 2.6.31.12-0.1 aligned to 2.6.31.12-0.1-desktop?
I just recently installed SUSE onto my computer because I'm sick of Windows crashing frequently.
Now I'm trying to setup my hardware, seems like everything is fine except for my graphics card.
I have an NVIDIA Quadro FX 540, and I'd downloaded the suitable driver from their site.
However, upon installation, I received some kind of error that mentioned it can't find my kernel.h or something like that. Someone said I would need the kernel source to proceed.
What is the best way for me to set this up?
Here is my system info when uname -a is ran: Linux namid 2.6.27.7-9-default #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64x86_64 GNU/Linux
I needed an open source alternative to after effects so i went for jahshaka but after following the instructions, i type in 'make' and hit return and it says "make: *** No targets specified and no makefile found. Stop." am i missing something obvious? i have looked around the web, but no-one has this problem that i can find i am using ubuntu 10.04.
I had somewhat of a simple questioned I tried out the latest revision to the Kernel of Day for Opensuse 11.2 built against the master. kernel-default-2.6.36-rc3.10.1.i586.rpm however looking at the tree it appears Novell/Suse doesn't release the source.rpm thinking I could recompile it to support the dependencies that I'm missing. See the message below-
Kernel image: /boot/vmlinuz-2.6.36-rc3-10-default Initrd image: /boot/initrd-2.6.36-rc3-10-default Root device: /dev/disk/by-id/ata-MAXTOR_6L020J1_6612-part1 (/dev/sda1) (mounted on / as ext4)Resume device: /dev/disk/by-id/ata-MAXTOR_6L020J1_661-part2 (/dev/sda2) modprobe: Module via82cxxx not found.
New to SuSE, but not Linux. Trying to install the source for 2.6.37.1-1.2, but YAST only has a different kernel version. Try downloading Kernel 2.6.37.1-1.2.2 rpm, but am getting into dependency hell.
i have installed mouse trap by the Ubuntu "easy peasy" software center ,but for some reason it didn't work so i uninstalled it and start to install the mouse trap from herehttp://live.gnome.org/MouseTrap/Installationbut when did the "make" step it gave me that error:make: *** No targets specified and no makefile found. Stop.so how i fix thatand another problem that i have is when i go to a live radio on the net to listen it dose not work how do i change it to work like i changed to the "vlc player" to be the first program that opens
I am a beginner in Linux. Never did any kernel programming in Linux/Windows before. I am now on a project and I am supposed to understand a Linux Device Driver Code. It contains 6 .c files and 1 Makefile.
The make file goes as this:
I have a.c b.c c.c d.c d.c e.c f.c in the director along with the Makefile mentioned.
I just changed my power settings so that my laptop would hibernate when I closed the lid... but now KDE Network Manager has decided that it will not allow itself to be enabled. I can get my ethernet connection working through YAST... but I *really* need the wireless to work as well... so can somebody *please* tell me why KNM is being so stupid, and how I can fix it? EDIT: I just realized that I should have put this in the Network subforum...
