Ubuntu :: ESATA Harddrive Attached To SIL 3112 Not Detected?
Jul 19, 2011
I have an eSATA harddrive in an dock/enclosure attached to my laptop via a PCIMCIA eSata card.
This is the card: SYBA SD-PCB-SATA SATA PCMCIA Card 2 x SATA Which is a Silicon Image 3112 chipset. The chipset is supposidly supported by linux, and their website has SuSE drivers.
However, I cannot get the drive attached to it to be detected. The hard drive is a 2TB Western Digital fully utilized by a single NTFS partition. Reformatting (if it would fix the issue) isn't a problem.
How can I get my hard drive to be detected?
View 3 Replies
ADVERTISEMENT
May 5, 2010
During the installation of Ubuntu from a LiveCD my harddrive doesn't seem to be detected. I cannot create partitions. I used Gparted to shrink my Windows partition. There's 23 GiB of unallocated space, but it's not being detected.
View 9 Replies
View Related
Aug 19, 2010
I've found several threads on compatibility linux kernel with this chip (SATA RAID controller), but all threads are old (newest was year 2007). users reported that linux recognizes the card, but don't recognize RAID drives and so on. There was some suggestions of patching kernel and so on. Now I'm interested in support with current kernel and can't find any info. I want to buy this card, but don't know if it will be supported. I want to use RAID-1. Have you any info or reports of successfull system working with that chipset ?
View 2 Replies
View Related
Mar 9, 2011
i've worked with Linux for a while now, but never in a double boot kind of way (except using wubi), and i'm still kind of a newby.i have 2 harddrivesfirst one has only 1 partition; Windows XPsecond one has 1 empty partition, simple storageand another partition where i installed fedora core, and GRUB is also located on this harddrive.I changed harddrive priority to my second harddrive, result:GRUB comes up, no problem, but when I try to boot windows, it tells mentldr is missing ctrl alt del to continueso i changed the harddisk priority back to the way it was, where the first drive containing windows is first priority... but then, no GRUB.i've tried editing the grub conf,i've tried fixboot/fixmbrtl;dr:no ntdlr when linux harddrive is main priorityno grub when windows harddrive is main priority
View 4 Replies
View Related
May 14, 2010
I just upgraded to Mythbuntu 10.04 (no fresh installation) and I don't know why but my external eSata drive is no more automatically mounted.The XFCE4 config is set to automount hotpluggable and external drives but nothing happens.The eSata drive is neither automounted when switched on before booting nor when switched on while the system is running.I'm not sure, but it's possible that it worked once or twice after the upgrade. Now, it's dead - I have to mount it all manually.With 9.10 it worked like charm.It's our HTPC and my wife is already making jokes again about her nerd-husband always needing to upgrade a perfectly running system.
View 3 Replies
View Related
May 4, 2010
I have a laptop (hp 8530w) with Vista and disk encryption software installed on the internal hard drive. As I cannot touch the internal hard drive, I would like to install and run Ubuntu from an external hard drive (500 hitachi in an enclosure with USB and eSata port). The idea being that when the drive is connected I run Ubuntu and when it is not the internal HDD is used to boot. I already installed Ubuntu 10.04 LTS on this external hard drive. I would like to run it using eSata interface and not USB as the former offers better performance. Unfortunately, as it turns out my BIOS does not allow me to boot directly from eSata disk. I can however boot from USB.
I thought it would be possible to install a boot loader on a USB stick and tell it somehow that Ubuntu is installed on the eSata disk and load the system from there.
I installed GRUB on a USB stick without grub.cfg. This allowed me to load GRUB and get to its shell. Here I discovered another issue. Using GRUB "ls" command the eSata drive is not listed - I can see the USB stick (hd0) and the internal drive (hd1) but no eSata drive. Not being an expert I don't know when in the boot process the eSata disk is detected. If I load Ubuntu completely from USB stick I can see it listed with "fdisk -l" command.
At this point, knowing that I can boot from USB, I'm wondering if there is any way to have a hybrid solution with USB stick storing only what's required to bootstrap Ubuntu, and then have everything else stored on and mounted to my external drive. Is there any other, better way (assuming I cannot do anything on the internal hard drive like repartitioning it, etc ...) to get to what I'm after? I know that I could boot and run Ubuntu using USB interface only but as I stated above I would like to use eSata as it offers better performance. I suppose I'm not the only one trying to do that. Unfortunately my web research did not reveal any solutions.
View 4 Replies
View Related
Dec 2, 2010
I have an external eSATA hard drive that has been working fine for months for backing up (I had been rsync'ing to it every night). For my configuration, see [URL]
I can no longer mount the drive with eSATA (doesn't even recognize it). It was mounted on /dev/sdb1. The drive also has a USB ... I tried that and it mounts fine.
So, my data is ok, but I want to resume nightly backups (via eSATA).
Here is some output:
fstab (2 lines below 'cause I swap HDD's between my dock and offsite storage):
Code:
proc /proc proc defaults 0 0
UUID=228d6ffc-c50e-425d-a768-fcb9c22d8383 / ext3 relatime,errors=remount-ro 0 1
UUID=aa75b03b-5037-4b0b-b73b-0c1f017c89dd none swap sw
[Code].....
View 9 Replies
View Related
Dec 28, 2010
I hope someone can assist me here. I have been using UBUNTU 10.04 for months now and was very happy with it for the most part. I am now trying the new 10.10 and just can not seem to figure out what happened to my ESATA hot swap ability.when I run lspci I can see the Jmicron Tech JMB362 so I assume that means it should be working.However when I put a drive in my ESATA bay I can not access it. I have to have the drive already in the bay while booting UBUNTU in order to see the drive. This will NOT work for me.
View 1 Replies
View Related
Feb 8, 2011
Every time I need to do something other then just boot up and use allready installed apps I run into trouble. Today a simpe task of connecting an esata drive was not at all possbile to handle. What ever i tried I got error msg. I tried to turn on the drive before boot. Still error.
View 9 Replies
View Related
Mar 19, 2010
If I wanted to install Ubuntu to an external eSATA drive, how would I do that and not screw up the GRUB install on my primary internal drive? I'm guessing I would want to tell that eSATA installation to install its GRUB to the first partition on that drive rather than on my primary internal, but then.... how would I get there from the GRUB on my primary drive?I guess my problem is that the eSATA drive is not always powered up, and I'm not sure what GRUB (on the primary internal drive) would do if there was an entry pointing to a drive that wasn't there (because it's not turned on)
View 1 Replies
View Related
May 15, 2010
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
View 4 Replies
View Related
Jun 16, 2010
I have an external hard drive that connects through an expansion card with eSATA on it. It was partitioned and formatted as NTFS in Windows but isn't recognized in Ubuntu 10.04.
View 1 Replies
View Related
Dec 17, 2010
I have run into a problem with eSATA that so far I have been unable to find a solution to it on any of the Ubuntu or Intel forums. My set up is as below:
OS: Ubuntu 10.04.01 LTS Server (base install)
Motherboard: DP55KG
BIOS: ver. KGIBX10J.86A..5893.2010.1116.0001
Marvell Controller: 88SE6145, BIOS 1.2.0.31
[Code]......
My understanding is that Ubuntu is suppose to detect the eSATA drive without any extra drivers, my experience is it does not - I am missing something or is anyone else having/had this problem and been able to get eSATA to work?
page [URL] but I don't believe this applies to Ubuntu.
View 9 Replies
View Related
Jul 20, 2011
In Linux is there a way to distinguish between two connected hard drives and tell which one is eSATA through shell or anyother way?
View 2 Replies
View Related
Feb 19, 2011
I have a Dawicontrol DC-300 eCard with a Siliconimage chip. When i hotplug the card into my laptop it does not get recognized by the system. There is not even an entry in the output of dmesg. When i do a reboot the card gets recognized correctly and the module "sata_sil24" has been loaded. My system is Fedora 14 64 bit.What can i do to make hotplugging of the eCard work?
View 5 Replies
View Related
Jul 31, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. Note: /dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.I have a 200GB IDE drive, /dev/sda that I use as a data drive.Both drives are accessible to 11.2 and in use.I installed OpenSuse 11.3 on /dev/sda in partition sda1. The same results occur with 32 bit and 64 bit distribution. I have grub for 11.3 on the the sda1 partition and chainload to it from 11.2 grub.
The installed 11.3 system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not appear to exist.I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps it is support of eSATA drives or the IDE to eSATA adapter that has regressed?
View 9 Replies
View Related
Jul 30, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. I have a 200GB IDE drive, /dev/sda that I use as a data drive. Both drives are accessible to 11.2 and in use.
/Dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.
I chose to install OpenSuse 11.3 on /dev/sda in partition sda1. I've installed 32 bit and 64 bit with the same result. I put grub on the the sda1 partition and chainload to it from 11.2 grub. I'm cautious because OpenSuse can be troublesome during installation.
PROBLEM: The installed system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not exist!
I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps support of eSATA drives.
View 9 Replies
View Related
Mar 9, 2010
As we know in Linux both SATA and eSATA disks are enumerated on /dev/sd[x] path. Is there a way using which i can identify if the device is an internal SATA or eSATA?
View 1 Replies
View Related
Dec 6, 2009
I have external hard drive which I used to connect via eSATA. I have edited fstab and it looks like that now: UUID=35C595D5738A319A /media/DATA ntfs auto,user,exec,suid,rw 0 0 The problem is that I can't unmount it as normal user, when do that, receive: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=35C595D5738A319A from /media/DATA
View 2 Replies
View Related
Jan 1, 2015
I want to know if it is possible to boot Debian from an external disk connected to an esata port which is plugged in as an expresscard.
A laptop I run Linux Mint on has an expresscard adapter which I plan purchase an esata card for. This would provide 2 esata ports.
I will have another harddrive with Debian installed.
I will then use an external enclosure to connect the Debian drive to the esata port.
I would then add a custom grub entry to point to the drive connected via esata over the expresscard adapter.
The expresscard requires drivers : [URL] ....
Does the environment of the initial grub screen have the necessary drivers to boot from the drive attached over the esata? Is there a way to load them?
Another solution mentions using kexec (first comment under question) : [URL] ....
This seems to require the drivers having been loaded too.
View 0 Replies
View Related
Mar 5, 2009
I am new to Fedora 10 and encountered the following problem. I installed FC10 on an external eSATA hard drive (sdb) on my laptop which already has some other Linux distros on sda. I used a DVD that came with the Fedora 10 Bible, so I can assume that the DVD had no problems. The installation went OK and I got no error messages. I added the following lines to the menu.lst file of the distro that I use to boot all my distros.
title Fedora 10
root (hd1,1)
kernel /boot/vmlinuz-2.6.27.15-170.2.24.fc10.i686 ro root=/dev/sdb2 rhgb quiet
initrd /boot/initrd-2.6.27.15-170.2.24.fc10.i686.img
When I boot Fedora, the blue bar at the bottom of the screen goes half-way, then gives me the error message: "mount: could not find filesystem '/dev/root' "
View 5 Replies
View Related
Mar 17, 2009
This machine has two internal HDDs which are dedicated to Vista (ergh). For various reasons, I elected to use an external drive for the installation of Linux. When I installed Fedora, I didn't have an eSATA cable, so I installed it via USB. if I change the boot device so it boots off the USB drive, the machine apparently remaps the drive to BIOS drive 0. However, when Linux boots, it'll still be considered sdc. So far so good. However, when I plug in the eSATA cable and try to boot Linux that way, the machine will boot off the internal sda because the only available option is "Internal Hard Drive." (And yes, the eSATA is working properly.)
I obviously need to install GRUB on the first drive, and it will then let me choose between Vista and Linux. I've done this kind of thing before on other machines and haven't had to much of a problem. However, running 'grub-install /dev/sda' resulted simply in blowing away my Vista boot loader, and a Grub installation that would hang at a black screen. Which of course then resulted in a plethora of pain trying to fix it with Microsoft's deliberately pathetic engineering.What did I do wrong there? And incidentally, the external hard drive isn't always going to be hooked up, so I don't want to be dependent on it to get into Vista.
View 3 Replies
View Related
Jul 31, 2010
How can I add an eSATA disk to a running system? It is OK if connected before booting, but just not seen if hotplugged
View 1 Replies
View Related
Aug 12, 2010
I get some errors in dmesg and a delay as libata probes and tries to negotiate with my eSATA enclosure.
Some backstory to this adventure:My mainboard is an MSI K9AGM2-L with the AMD SB600 chipset providing the AHCI SATA controller for four ports, two of which (#s 3 and 4) are available.
A Rosewill RCR-AK-IM5002 internal card reader (manufacturer page missing) provides a SATA-to-eSATA adaptor port.
I wish to use a SAMSUNG Spinpoint M7E HM641JI 640GB 2.5" SATA hard disk drive externally. First, I had a Vantec NST-260SU-BK 2.5" SATA to USB 2.0 and eSATA enclosure. As explained in this forum post, all seemed well at first. But even though I got absolutely no visible errors, I could see (through hash checking and byte-by-byte comparisons) that writing (copying) to the external disk was not happening correctly. After exchanging the enclosure several times, I finally noticed that the retailer had a different (generic) brand, so I got one of those instead. (The particular unit I got was missing its screws; had a protrusion in its casing that obstructed the circuit board's seating; and caused even my mainboard's firmware to lock up when it was probed, twice, on each boot. A replacement with the same model remedied those three issues.)
Now we come to the present. The Comkia MM-G3BK-SUE MobiMe G3 2.5" SATA to USB 2.0 and eSATA enclosure (manufacturer page missing) doesn't seem to exhibit the writing issue (yet) -- hurray! However, it causes libata to struggle for fifteen seconds or so trying to connect when it is plugged in. (It also causes openSUSE to stall while booting for that reason.) Here is the output from dmesg:
Code:
[ 127.732765] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 127.732770] ata4: irq_stat 0x00000040, connection status changed
[ 127.732774] ata4: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 127.732782] ata4: hard resetting link
[Code].....
View 1 Replies
View Related
Feb 21, 2010
My Motherboard has 4 SATA ports on it, Is there a way short of buying an expensive RAID card to add more SATA drives and do a software raid still? What about getting an external 8-bay eSATA enclosure and putting drives in it? Will the OS see this and software raid? (linux)
View 2 Replies
View Related
Jul 7, 2010
Anyone got any experience with eSATA cards and drives under RHEL4? I've got a client with two RHEL4 boxes that want to add eSATA cards and drives for backup purposes.
They really need to automount like a USB drive does, would RHEL4 automount eSATA?
View 5 Replies
View Related
May 16, 2011
how to get thunar with xfce 4.6 to mount external hard drives. Thunar with xfce 4.8 uses udisk, and all external and internal hard disks show up in the sidebar.With thunar in debian squeeze, though, no internal or external hard drives show up.
I can live without internal hard drives showing up, but I'd like to be able to mount my eSATA drive automatically. So far I've been completely unsuccessful in getting an entry to show up in thunar (like when a usb flash disk or cd is inserted), so I've added an entry to fstab:
LABEL=LIBRARY /home/library ext4 noauto,defaults,users And that doesn't seem to do anything. With and without the fstab line, I get a popup saying something like "Unable to mount volume "LIBRARY". You do not have priviliges to mount LIBRARY."
Everything else seems to mount fine. It's just that thunar/hal/whatever thinks that my eSATA drive is an "internal" hard drive and so doesn't treat it as removable.ALL of my drives, internal and eSATA, show up in the gtk "places" menu that is used in file-roller, iceweasel, etc. If I could find a way to get thunar to do this (like it can wtih xfce 4.8 and udisks) that would be GREAT.
EDIT: I also wanted to add that they show up in pcmanfm, but it also tells me "Not authorized" when I try to mount them.
View 4 Replies
View Related
Aug 26, 2011
I want to "build" a new backup solution for my home LAN. I have 3 openSUSE machines at various versions and 1 File Server with openSUSE 11.4.My plan is to plug a eSATA or USB3 docking station on the file server and then take backups from the clients either via rsync or Amanda.Since the backup will not be a daily activity, I would like to have the option to run the backup during night, and automatically, BUT, without any action from my part. So, I would like to attach a large external HDD on the machine and then:Power on the docking station/HDD.Perform the backup from the Amanda Server or rsync scripts.Power off the docking station/HDD.Do you know any docking station that has a "linux" power management?If not, how do I power up/power down from console an eSATA or USB HDD?
View 2 Replies
View Related
Jun 29, 2010
I would like to boot directly from an external hard disk to improve performance over my internal notebook hard disk. My notebook has no native eSata jack but a pci express card.
As my BIOS doesn't support the card on boot time so no way directly booting it.
My question is, is it possible to work around this issue by using an USB stick or similar with a boot loader like grub and if so, will this only work for Linux or Windows as well?
View 1 Replies
View Related
Sep 5, 2011
I attached an external hard drive to an esata port, when i go to my computer to open the drive, i right click and open in a new window i get install additional software, there is no application installed that can open files of this type block device(inode/blockdevice) di you want to install one install or not do i install the software? I authenticated in dolphin saw the files and folders then unmounted but should i install the software and is it safe or just unnecessary?
View 4 Replies
View Related
