I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
View 4 RepliesI have an external hard drive that connects through an expansion card with eSATA on it. It was partitioned and formatted as NTFS in Windows but isn't recognized in Ubuntu 10.04.
View 1 Replies View RelatedI have an external eSATA hard drive that has been working fine for months for backing up (I had been rsync'ing to it every night). For my configuration, see [URL]
I can no longer mount the drive with eSATA (doesn't even recognize it). It was mounted on /dev/sdb1. The drive also has a USB ... I tried that and it mounts fine.
So, my data is ok, but I want to resume nightly backups (via eSATA).
Here is some output:
fstab (2 lines below 'cause I swap HDD's between my dock and offsite storage):
Code:
proc /proc proc defaults 0 0
UUID=228d6ffc-c50e-425d-a768-fcb9c22d8383 / ext3 relatime,errors=remount-ro 0 1
UUID=aa75b03b-5037-4b0b-b73b-0c1f017c89dd none swap sw
[Code].....
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
View 2 Replies View RelatedI've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
View 2 Replies View RelatedI run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run
Code:
sudo fdisk -l
and this is what I get
[Code]...
I recently wiped and re-installed Ubuntu on my system Lenovo Thinkpak T510, now running 11.04. Before formatting my hard drive, I backed up all my information to an external USB Seagate FreeAgent Drive, which I reformatted to ext4 before copying my data there using a rsync command. After reinalling the operating system, I'm no longer able to get the drive to mount. I'm not quite sure what's going on. Here are the results of a fdisk command:
Code:
$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I'm not able to mount the drive from my mac either. Did I do something wrong when backing up my data and loose everything (fortunately, most of it is also backed up elsewhere, just not all in a single place), or is there something else I can try to get it back?
I've recently started using a 500gb external hard drive for music and backups. It is always plugged into the computer but doesn't always mount at boot-up and I have to dis-connect and re-connect the USB cable. The desktop icon then appears.The fact that it's mount point changes also means I can't share the Music folder on the external hard drive via Samba (WinXP machines say they can't access the folder) and also Songbird 'loses' the tracks.
How do I permanently mount the external hard drive? I assume it will mean some editing of the fstab file? Unfortunately, I've got no idea of what I should enter on there.The external hard drive volume is called 'Music and BackUps' - Gparted screengrab attached.
I recently reformatted my external hard drive. Somewhere along the way I think my fstab got messed up because now my hard drive won't mount. Instead I get the following error:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error
In some cases useful info is found in syslog - try dmesg | tail or so
If I mount it through Gparted, it mounts just fine.
My fstab currently looks like this:
I have some documents that I need to copy from my old disk that has Fedora 9 on it. I bought external usb case for 2'5" disk but when I connect it through usb cable I can only hear it running but there's not much of the auto-detection.
View 9 Replies View RelatedBeen using a SeaGate FreeAgent external drive for past 6 months. Suddenly the ext2 partition (/dev/sdb2) won't mount, while the NTFS partition (/dev/sdb1) does.I've been allowing automount, no entry in /etc/ fstab.When the NTSF partition mounts there appears an entry
View 7 Replies View RelatedI have a new install of debian on my laptop. When I plug in my external hard drive (usb) I get the message. Invalid mount option when attempting to mount the volume 'External Drive'.
View 7 Replies View RelatedI am trying to recover files off a 3.5" IDE Hard Drive that had Windows ME installed on it. I have access to a MacBook, Windows XP Desktop PC, and a cd with Ubuntu 8.10 on it.
Attempts:
1) If I make the HD the only primary master HD it won't boot up.
2) If I make it a slave drive it won't boot up.
3) I purchased an external enclosure from Radio Shack which turned out to be crap and online reports supported this conclusion. I got nowhere with that thing. Bestbuy doesn't sell 3.5" IDE enclosures.
4) By using an IDE / SATA to USB kit, I am able to connect the HD to the PC via USB cable. XP will detect the drive, however the HD will not my displayed under "My Computer" nor "Disk Management".
Onto linux (this is where I grabbed the Ubuntu cd):
5) When connected, the HD will show up under "Computer" as a "USB Drive". When I double click on it I get the error "Unable to mount location Can't mount file".
Allow me to show you some commands I ran:
Code:
Code:
Code:
If I wanted to install Ubuntu to an external eSATA drive, how would I do that and not screw up the GRUB install on my primary internal drive? I'm guessing I would want to tell that eSATA installation to install its GRUB to the first partition on that drive rather than on my primary internal, but then.... how would I get there from the GRUB on my primary drive?I guess my problem is that the eSATA drive is not always powered up, and I'm not sure what GRUB (on the primary internal drive) would do if there was an entry pointing to a drive that wasn't there (because it's not turned on)
View 1 Replies View RelatedI wanted to make a clone of my drive, so I tried the ole sudo dd if=/dev/sda1 of=/dev/sdg1 trick, but first I formatted the drive to the Ext4 format. I wish I would have understood that format a little more before I decided to format it that way. Now I can't access my drive at all. I read almost everything on the net about manually mounting it, but almost everything was in Fat, NTFS, or Ext3/2 format. I even read the Ubuntu documentation. I don't know if it's because my drive is in Ext4 format, or if I'm just not doing something right.
As you can see in the following picture, it recognizes the drive, yet I am unable to mount it. I am trying to access the 160 GB drive. I even tried to see if Windows would recognize it. No go. Today while lurking in the Ubuntu Forums I found a way to make a live .iso of my system (which I think is awesome). So now I want to reformat my drive and use it as storage once again. I think I will restore it to NTFS. I thought that the Ext4 format would work better in Linux (which I was wrong), but now I need Windows to recognize it as well, and it needs to be able to store files bigger than 4 GB (unless you have a suggestion on what to format it as).
how could I mount a Toshiba external hard disc drive to my Ubuntu 9.04?
View 3 Replies View RelatedI have an external hard drive that is connect to my laptop through USB port. But it won't show in my folder. I've looked every where but could located.
View 1 Replies View RelatedI;ve been using Ubuntu (10.xx) for a few months now and am really getting the hang of it.My NAS drive has now failed.It is a WD Mybook world edition 1tb with the blue rings.The drive spins fine and in windows I can see the partitions but I understand the file system is linux based.Can anyone help as to how I can mount the drive and recover the files using ubuntu / linux.I have a USB caddy to connect the SATA drive to my laptop.
View 9 Replies View RelatedI try
mount -t ntfs -o rw /dev/sdb1 /mnt/exthdd
it doesn't give me any response so I presume it succeeded but when I try to touch it, it tells me it's a read-only file system
I'm having problems mounting my NTFS external hard drive .
dmseg :
Code:
1.padlock: VIA PadLock Hash Engine not detected.
2.PPP MPPE Compression module registered
3.PPP BSD Compression module registered
4.PPP Deflate Compression module registered
5.npviewer.bin[5405]: segfault at ff99cd48 ip ff99cd48 sp bfc8afac error 4
6.usb 4-2: new high speed USB device using ehci_hcd and address 5
[code].....
Manually mount or fix my external hard drive. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drive from Iomega. When I plug it in, a message appears that reads:
"Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb2,missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg | tail or so".
Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received the following:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Partition table entries are not in disk order
Earlier this year I encountered a problem with my external hard drive; it would not mount automatically and I kept getting an error message. Last time I was able to fix it by typing in the terminal 'sudo fsck /dev/sdb2'. Once again it's not mounting automatically and I'm not even getting the error message. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drivefrom Iomega. Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received thefollowing:WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies View Relatedmy external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
View 2 Replies View RelatedI'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
I've been running Linux for a year on our family computers (one desktop, one laptop and two netbooks). I've run into a problem with the encrypted ext4 partition (270GB) on a LaCie external hard drive which also has a NTFS partition (50GB) which is not encrypted . First two times I tried using the encrypted ext4 partition (from two different computers) it worked fine but now I can't access it at all. I can still access the NTFS partition.Encrypted external hard drive partition will unlock but won't mount (or unmount). The computer says "Opening 320GB Hard Disk" but after a minute says, "Unable to mount location. DBus error org.freedesktop.DBus.Error.NoReply"Disk utility (GUI for gparted I believe) states that the encrypted partition (/dev/sdb1) is unlocked and the underlying partition (/dev/dm-0) is not mounted but it has a "busy circle sign" on it that will not turn off. The NTFS partition on the same drive mounts and accesses normally.
But if I try to unmount the NTFS partition, it says: "Unable to stop drive. One or more partitions are busy on /dev/sdb"If I try to shut down the computer, it is unable to shut down because (I assume) it can't shut down that drive either. So I have to just turn off the computer.fdisk states that /dev/dm-0 doesn't have a valid partition table [full output attached]fsck suggests: "Filesystem mounted or opened exclusively by another program?"ps axuf shows some processes running on /dev/dm-0 but killinghem doesn't release the drive either. [full output attached]I checked /etc/blkid.tab (suggested in one vaguely related thread) and there's no actual file only a broken link pointing to /dev/.blkid.tab (which doesn't exist). I tried deleting this link and rebooting but that didn't change anything.when I finally gave up my data as lost, I tried to format the partition (using Disk Utility) and it refused saying, "One or more block devices are holding /dev/sdb"
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I can't mount my external hard drive with the graphic interface of my Xfce desktop anymore, since the latest upgrade.
The disk does show up, but when I try mounting it, I get a pop up window telling me that :
Failed to mount "My_Passport". Not authorized to perform operation.
I want to mount external hard drive using fedoracore 15 on a Verbatim 500 GB.
View 1 Replies View RelatedI attached an external hard drive to an esata port, when i go to my computer to open the drive, i right click and open in a new window i get install additional software, there is no application installed that can open files of this type block device(inode/blockdevice) di you want to install one install or not do i install the software? I authenticated in dolphin saw the files and folders then unmounted but should i install the software and is it safe or just unnecessary?
View 4 Replies View Related