Fedora Installation :: Changing To Boot Off ESATA Drive
Mar 17, 2009
This machine has two internal HDDs which are dedicated to Vista (ergh). For various reasons, I elected to use an external drive for the installation of Linux. When I installed Fedora, I didn't have an eSATA cable, so I installed it via USB. if I change the boot device so it boots off the USB drive, the machine apparently remaps the drive to BIOS drive 0. However, when Linux boots, it'll still be considered sdc. So far so good. However, when I plug in the eSATA cable and try to boot Linux that way, the machine will boot off the internal sda because the only available option is "Internal Hard Drive." (And yes, the eSATA is working properly.)
I obviously need to install GRUB on the first drive, and it will then let me choose between Vista and Linux. I've done this kind of thing before on other machines and haven't had to much of a problem. However, running 'grub-install /dev/sda' resulted simply in blowing away my Vista boot loader, and a Grub installation that would hang at a black screen. Which of course then resulted in a plethora of pain trying to fix it with Microsoft's deliberately pathetic engineering.What did I do wrong there? And incidentally, the external hard drive isn't always going to be hooked up, so I don't want to be dependent on it to get into Vista.
View 3 Replies
ADVERTISEMENT
Mar 5, 2009
I am new to Fedora 10 and encountered the following problem. I installed FC10 on an external eSATA hard drive (sdb) on my laptop which already has some other Linux distros on sda. I used a DVD that came with the Fedora 10 Bible, so I can assume that the DVD had no problems. The installation went OK and I got no error messages. I added the following lines to the menu.lst file of the distro that I use to boot all my distros.
title Fedora 10
root (hd1,1)
kernel /boot/vmlinuz-2.6.27.15-170.2.24.fc10.i686 ro root=/dev/sdb2 rhgb quiet
initrd /boot/initrd-2.6.27.15-170.2.24.fc10.i686.img
When I boot Fedora, the blue bar at the bottom of the screen goes half-way, then gives me the error message: "mount: could not find filesystem '/dev/root' "
View 5 Replies
View Related
Mar 19, 2010
If I wanted to install Ubuntu to an external eSATA drive, how would I do that and not screw up the GRUB install on my primary internal drive? I'm guessing I would want to tell that eSATA installation to install its GRUB to the first partition on that drive rather than on my primary internal, but then.... how would I get there from the GRUB on my primary drive?I guess my problem is that the eSATA drive is not always powered up, and I'm not sure what GRUB (on the primary internal drive) would do if there was an entry pointing to a drive that wasn't there (because it's not turned on)
View 1 Replies
View Related
Jul 31, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. Note: /dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.I have a 200GB IDE drive, /dev/sda that I use as a data drive.Both drives are accessible to 11.2 and in use.I installed OpenSuse 11.3 on /dev/sda in partition sda1. The same results occur with 32 bit and 64 bit distribution. I have grub for 11.3 on the the sda1 partition and chainload to it from 11.2 grub.
The installed 11.3 system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not appear to exist.I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps it is support of eSATA drives or the IDE to eSATA adapter that has regressed?
View 9 Replies
View Related
Jul 30, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. I have a 200GB IDE drive, /dev/sda that I use as a data drive. Both drives are accessible to 11.2 and in use.
/Dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.
I chose to install OpenSuse 11.3 on /dev/sda in partition sda1. I've installed 32 bit and 64 bit with the same result. I put grub on the the sda1 partition and chainload to it from 11.2 grub. I'm cautious because OpenSuse can be troublesome during installation.
PROBLEM: The installed system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not exist!
I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps support of eSATA drives.
View 9 Replies
View Related
Dec 6, 2009
I have external hard drive which I used to connect via eSATA. I have edited fstab and it looks like that now: UUID=35C595D5738A319A /media/DATA ntfs auto,user,exec,suid,rw 0 0 The problem is that I can't unmount it as normal user, when do that, receive: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=35C595D5738A319A from /media/DATA
View 2 Replies
View Related
Jan 1, 2015
I want to know if it is possible to boot Debian from an external disk connected to an esata port which is plugged in as an expresscard.
A laptop I run Linux Mint on has an expresscard adapter which I plan purchase an esata card for. This would provide 2 esata ports.
I will have another harddrive with Debian installed.
I will then use an external enclosure to connect the Debian drive to the esata port.
I would then add a custom grub entry to point to the drive connected via esata over the expresscard adapter.
The expresscard requires drivers : [URL] ....
Does the environment of the initial grub screen have the necessary drivers to boot from the drive attached over the esata? Is there a way to load them?
Another solution mentions using kexec (first comment under question) : [URL] ....
This seems to require the drivers having been loaded too.
View 0 Replies
View Related
May 15, 2010
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
View 4 Replies
View Related
Jun 16, 2010
I have an external hard drive that connects through an expansion card with eSATA on it. It was partitioned and formatted as NTFS in Windows but isn't recognized in Ubuntu 10.04.
View 1 Replies
View Related
Jul 7, 2010
Anyone got any experience with eSATA cards and drives under RHEL4? I've got a client with two RHEL4 boxes that want to add eSATA cards and drives for backup purposes.
They really need to automount like a USB drive does, would RHEL4 automount eSATA?
View 5 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Sep 5, 2011
I attached an external hard drive to an esata port, when i go to my computer to open the drive, i right click and open in a new window i get install additional software, there is no application installed that can open files of this type block device(inode/blockdevice) di you want to install one install or not do i install the software? I authenticated in dolphin saw the files and folders then unmounted but should i install the software and is it safe or just unnecessary?
View 4 Replies
View Related
Jun 29, 2010
I would like to boot directly from an external hard disk to improve performance over my internal notebook hard disk. My notebook has no native eSata jack but a pci express card.
As my BIOS doesn't support the card on boot time so no way directly booting it.
My question is, is it possible to work around this issue by using an USB stick or similar with a boot loader like grub and if so, will this only work for Linux or Windows as well?
View 1 Replies
View Related
Dec 5, 2010
I am not smart enough to figure out how to install Fedora 14 correctly. I have an older computer with 2 20gb drives. On the first drive (sda) I have Windows XP, and on the 2nd drive (sdb) I am trying to install Fedora 14. The catch is that I would like to put Grub and the MBR on the first drive so that when the computer boots, it asks whether to load Windows XP or Fedora. I know I have done it with Fedora 13 in the past, but have forgotten how to do it. How to accomplish this in Anaconda for Fedora 14?
View 2 Replies
View Related
Sep 14, 2009
I installed Ubuntu 9.04 on my latop. I have an older 80 gig HP laptop with Windows XP. Currently, i have XP as the NTFS drive and it takes up about 72 gigs of space, the swap drive for ubuntu is about 256 MB and the ext-3 drive is 2.5 gigs. However, i have no more hard drive space to run or instal any programs on Ubuntu. So what i need to do is decrease the NTFS drive as i still have over 30 gigs of free space on my laptop and increase the ext3 drive to about 10 or 15 gigs and increase the swap drive?
View 3 Replies
View Related
Jan 24, 2009
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
View 3 Replies
View Related
Jun 22, 2009
I just downloaded the Fedora11 LiveCD and booted it......it boots, but when it starts to load KDE, it takes a very long time, and it never ends. It just keeps on reading from the CD-ROM drive. I can see the GUI is loading, but the loading time is so long that the mouse sometimes freezes. My Config is 512MB of RAM and 2 IDE Hard Disks. Also note that I verified the image with SHA256, and even burnt the CD at two different speeds, one at 48X and the other at 16X. Still nothing. There has also been severe kernel panics on EXT4.
View 2 Replies
View Related
Jul 9, 2009
I have a drive... let's say SDA1 On that drive I do a F10 install.
Now I remove the drive and put another drive in and did F11 install on another drive in the SDA1 slot.
Now I put the other first drive in.
Now, F10 is on SDA1 and F11 is on SDB1.
What can I add to FSTAB and GRUB.CONF so I can choose which drive I want to use at boot time?
View 14 Replies
View Related
Dec 22, 2009
I know that several people have answered this type of question before, but I can't seem to find the information I need to get it working for me. According to my research what I want to do cannot be done. However, i'm sure there must be a way.This is my scenario - I will try to be as accurate as I can be to make it easier for poeple to help. I have a Sony Vaio PCG-141C laptop, the half sized old ones. It has a usb floppy drive that I can boot from. I have also got a usb cd-rom drive but the laptop simply will not boot from it! I have got the F12 cd images downloaded and on a usb hard drive.
I want to boot from a floppy disc, to load F12 from the cd images stored on the usb hard drive. Now with Redhat 9 you could use a floppy drive to do just this. However, F12, does not support it.
Is there a work-around that I could try. I have already tried Smart Boot Manager, but it won't detect the usb cd-rom drive. I have Redhat 9 installed on the laptop, and can mount the usb hard drive from terminal. Could I start the install process from here with the images stored on the external drive??Is there anything I can do, or am I doomed to never get past this.
View 6 Replies
View Related
Feb 1, 2009
After going back & forth between win7b & F10 installs, I can't get both to live on the same hard disk for dual booting anymore. win7 complains about fedora's GPT disk being unacceptable for installation. win7 blows away fedora's GPT partitions when it installs. Fedora doesn't recognize win7 partitions when it installs. I can't specify exact partition boundaries with windows even if I know what they are, and I can't seem to find any info how to do it in parted either. I have win7 installed in partition 3 in a known location on disk, but if I reinstall f10 (again), it's going to blow away the win7 boot data on the disk. How do I tell grub where to find the chainloader thingy? Can that still even be used? win7 no longer uses ntldr, and I haven't found an updated procedure for this new boot method.
View 4 Replies
View Related
Dec 27, 2010
i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies
View Related
Aug 11, 2011
recently built a F14 x64_86 system on a dual core X64 AMD based box. Later I installed the drive in a dual Xeon dual core box. I have the os set to boot to run level 3 then after I login I run telinit 5 to get to X11-Gnome desktop.However, when I boot the xeon machine I am able to login and run shell commands, such as yum update, fdisk -l etc. But when I try to telinit 5 the process hangs, hitting the power button, the machine goes through it's shutdown script.
I haven't tried transplanting the drive back into the original machine. just to test it's integrity, but I suspect it not corrupted. Not sure this matters, but running it's nvidia's driver for the video card. I think I can also boot to nouveau, but not 100 % sure with out having to deinstall the nvidia binary. both boxes uses the same video card a nvidia 8800 gtfwiw, I can boot my i386 f14 usb thumb drives that have the generic video driver installed.
View 1 Replies
View Related
May 4, 2010
I have a laptop (hp 8530w) with Vista and disk encryption software installed on the internal hard drive. As I cannot touch the internal hard drive, I would like to install and run Ubuntu from an external hard drive (500 hitachi in an enclosure with USB and eSata port). The idea being that when the drive is connected I run Ubuntu and when it is not the internal HDD is used to boot. I already installed Ubuntu 10.04 LTS on this external hard drive. I would like to run it using eSata interface and not USB as the former offers better performance. Unfortunately, as it turns out my BIOS does not allow me to boot directly from eSata disk. I can however boot from USB.
I thought it would be possible to install a boot loader on a USB stick and tell it somehow that Ubuntu is installed on the eSata disk and load the system from there.
I installed GRUB on a USB stick without grub.cfg. This allowed me to load GRUB and get to its shell. Here I discovered another issue. Using GRUB "ls" command the eSata drive is not listed - I can see the USB stick (hd0) and the internal drive (hd1) but no eSata drive. Not being an expert I don't know when in the boot process the eSata disk is detected. If I load Ubuntu completely from USB stick I can see it listed with "fdisk -l" command.
At this point, knowing that I can boot from USB, I'm wondering if there is any way to have a hybrid solution with USB stick storing only what's required to bootstrap Ubuntu, and then have everything else stored on and mounted to my external drive. Is there any other, better way (assuming I cannot do anything on the internal hard drive like repartitioning it, etc ...) to get to what I'm after? I know that I could boot and run Ubuntu using USB interface only but as I stated above I would like to use eSata as it offers better performance. I suppose I'm not the only one trying to do that. Unfortunately my web research did not reveal any solutions.
View 4 Replies
View Related
Feb 5, 2011
i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
View 6 Replies
View Related
Feb 19, 2011
I have a Dawicontrol DC-300 eCard with a Siliconimage chip. When i hotplug the card into my laptop it does not get recognized by the system. There is not even an entry in the output of dmesg. When i do a reboot the card gets recognized correctly and the module "sata_sil24" has been loaded. My system is Fedora 14 64 bit.What can i do to make hotplugging of the eCard work?
View 5 Replies
View Related
Feb 22, 2010
I have a Toshiba NB 205 Netbook. It is currently dual boot with Win 7 and UNR (9.10). The default OS is Win 7. I would like to leave the machine as dual boot, but make UNR the default boot OS, so that I don't have to babysit the machine and choose UNR every time I reboot the machine. BTW, I am delighted with UNR! What a great OS. Really like how it plays so nicely with Firefox. And much faster than Win 7.
View 1 Replies
View Related
Oct 2, 2010
I've edited /etc/fstab to auto-mount two partitions on a new disk drive that have been formatted as ext3, by appending the following two lines:
/dev/sdb1 /bak1 ext3 defaults 1 1
/dev/sdb2 /bak2 ext3 defaults 1 1
On reboot, the system complains there is some problem (I can't advise what the problem is, because the display scrolls up too fast to read!), and I'm left with a root command prompt.
Its a /etc/fstab problem, presumably. I've used vi to edit /etc/fstab to remove the two lines mentioned above, but on quit and save, I'm told I have a read-only file system!
1. How can I mount a read-write file system so I can edit /etc/fstab?
2. What's wrong with my two new entries in /etc/fstab? After formatting /dev/sdb1 and /dev/sdb2, I checked the they were mountable with # mount /dev/sdbn /bakn (n = 1, 2) before editing fstab.
View 9 Replies
View Related
Aug 16, 2009
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Nov 19, 2010
Currently I have a 1TB drive that has Ubuntu installed and is used for all of my storage, vids music etc.After speaking with a friend he suggested I change the operating system to a smaller drive and use the 1TB for storage only. His reasoning for this is that the disc with the OS on it receives much heavier use so storage should be kept separate.If that's true I have a 250GB drive that I could use as the boot/OS drive.What I was considering doing was to make the 250GB drive the boot disc in BIOS, then install Ubuntu from the Live CD onto the 250GB. After doing that my plan was to use gparted to wipe the Ubuntu OS partition off the TB drive to leave it as a storage only drive.
View 9 Replies
View Related
