Ubuntu Installation :: Install To An ESATA External Drive?
Mar 19, 2010
If I wanted to install Ubuntu to an external eSATA drive, how would I do that and not screw up the GRUB install on my primary internal drive? I'm guessing I would want to tell that eSATA installation to install its GRUB to the first partition on that drive rather than on my primary internal, but then.... how would I get there from the GRUB on my primary drive?I guess my problem is that the eSATA drive is not always powered up, and I'm not sure what GRUB (on the primary internal drive) would do if there was an entry pointing to a drive that wasn't there (because it's not turned on)
View 1 Replies
ADVERTISEMENT
May 15, 2010
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
View 4 Replies
View Related
Jun 16, 2010
I have an external hard drive that connects through an expansion card with eSATA on it. It was partitioned and formatted as NTFS in Windows but isn't recognized in Ubuntu 10.04.
View 1 Replies
View Related
Sep 5, 2011
I attached an external hard drive to an esata port, when i go to my computer to open the drive, i right click and open in a new window i get install additional software, there is no application installed that can open files of this type block device(inode/blockdevice) di you want to install one install or not do i install the software? I authenticated in dolphin saw the files and folders then unmounted but should i install the software and is it safe or just unnecessary?
View 4 Replies
View Related
Jul 30, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. I have a 200GB IDE drive, /dev/sda that I use as a data drive. Both drives are accessible to 11.2 and in use.
/Dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.
I chose to install OpenSuse 11.3 on /dev/sda in partition sda1. I've installed 32 bit and 64 bit with the same result. I put grub on the the sda1 partition and chainload to it from 11.2 grub. I'm cautious because OpenSuse can be troublesome during installation.
PROBLEM: The installed system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not exist!
I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps support of eSATA drives.
View 9 Replies
View Related
Mar 5, 2009
I am new to Fedora 10 and encountered the following problem. I installed FC10 on an external eSATA hard drive (sdb) on my laptop which already has some other Linux distros on sda. I used a DVD that came with the Fedora 10 Bible, so I can assume that the DVD had no problems. The installation went OK and I got no error messages. I added the following lines to the menu.lst file of the distro that I use to boot all my distros.
title Fedora 10
root (hd1,1)
kernel /boot/vmlinuz-2.6.27.15-170.2.24.fc10.i686 ro root=/dev/sdb2 rhgb quiet
initrd /boot/initrd-2.6.27.15-170.2.24.fc10.i686.img
When I boot Fedora, the blue bar at the bottom of the screen goes half-way, then gives me the error message: "mount: could not find filesystem '/dev/root' "
View 5 Replies
View Related
Mar 17, 2009
This machine has two internal HDDs which are dedicated to Vista (ergh). For various reasons, I elected to use an external drive for the installation of Linux. When I installed Fedora, I didn't have an eSATA cable, so I installed it via USB. if I change the boot device so it boots off the USB drive, the machine apparently remaps the drive to BIOS drive 0. However, when Linux boots, it'll still be considered sdc. So far so good. However, when I plug in the eSATA cable and try to boot Linux that way, the machine will boot off the internal sda because the only available option is "Internal Hard Drive." (And yes, the eSATA is working properly.)
I obviously need to install GRUB on the first drive, and it will then let me choose between Vista and Linux. I've done this kind of thing before on other machines and haven't had to much of a problem. However, running 'grub-install /dev/sda' resulted simply in blowing away my Vista boot loader, and a Grub installation that would hang at a black screen. Which of course then resulted in a plethora of pain trying to fix it with Microsoft's deliberately pathetic engineering.What did I do wrong there? And incidentally, the external hard drive isn't always going to be hooked up, so I don't want to be dependent on it to get into Vista.
View 3 Replies
View Related
Dec 2, 2010
I have an external eSATA hard drive that has been working fine for months for backing up (I had been rsync'ing to it every night). For my configuration, see [URL]
I can no longer mount the drive with eSATA (doesn't even recognize it). It was mounted on /dev/sdb1. The drive also has a USB ... I tried that and it mounts fine.
So, my data is ok, but I want to resume nightly backups (via eSATA).
Here is some output:
fstab (2 lines below 'cause I swap HDD's between my dock and offsite storage):
Code:
proc /proc proc defaults 0 0
UUID=228d6ffc-c50e-425d-a768-fcb9c22d8383 / ext3 relatime,errors=remount-ro 0 1
UUID=aa75b03b-5037-4b0b-b73b-0c1f017c89dd none swap sw
[Code].....
View 9 Replies
View Related
May 23, 2010
A while ago I installed Ubuntu as a dual-boot on my Windows XP machine. It worked ok, but I quickly realised that I had neither the hard drive space or RAM to really run a dual-boot machine properly. So, I tried to uninstall Ubuntu and return to XP. Unfortunately, I discovered that uninstalling is not that straightforward and I've ended up with a theoretical dual-boot but with the HD repartitioned so that Ubuntu takes up the smallest amount of space possible. Because of this, when the machine boots, I still get a GRUB boot screen where I have to manually select XP to continue with the boot. (Ubuntu is still the default boot OS - I don't know how to change this!)
I've now decided to install Ubuntu again but this time on an external USB hard drive. In my head (and this could be wrong) this will give me the option to run the machine with Ubuntu if the external HD is connected or run XP if it is not.I've seen several tutorials about how to do this, but none seem to address the situation where GRUB is the boot loader already. Some tutorials tell me to disconnect the internal HD before attempting to install Ubuntu on the external. Do I really need to do this? Another alternative I've heard of is to download a LIVE cd to the external drive and then run the OS from that instead of performing a full install. Any thoughts?
View 3 Replies
View Related
Apr 8, 2010
is there a way to install Ubuntu -from- an external hard drive. For example, let's say, you have a complete Ubuntu system with everything (no need to download additional packages/softwrae/etc anymore) , but you can't use remastersys to create an ISO with it because it is way over 10GB in size. Much larger than any DVD you could burn that newly created ISO to.. (besides remastersys is limited to the size of a DVD-r anyways)
Maybe someone has tried this before? Someone has created a dedicated large hard drive that is essentially the same thing as a ubuntu installation usb flash drive, to boot from an then install Ubuntu onto another "new" hard drive? I think it would be nice to have a hard drive (external usb or even better, an internal hdd drive i could hot swap to each new computer I have that I wish to install it onto.. ) And I think it would be so much faster to install from a Sata internal HDD drive than a USB pendrive or a cd/dvd rom, right?
View 2 Replies
View Related
Feb 14, 2011
I have downloaded UBUNTU 10.04 and saved to external hard drive since I have no CD drive in my note book. I want to install it from external hard drive what is the command and how can I install it.
View 1 Replies
View Related
Jul 9, 2010
I have the Debian Lenny 5-0-5 DVD's but they are not live bootable. They come with a setup.exe file which copies over the kernel images to boot from windows. Thing is that at the moment I am running the Ubuntu distro of Debian and cannot use the setup to do it. Can anyone tell me how to boot this disk in ubuntu itself?
Also does the debian installer allow you to choose which disk it installs to?(I am talking about the thing in the ubuntu installer that allows you to partition disks and define your own mount points before the install)
View 1 Replies
View Related
Feb 21, 2010
My Motherboard has 4 SATA ports on it, Is there a way short of buying an expensive RAID card to add more SATA drives and do a software raid still? What about getting an external 8-bay eSATA enclosure and putting drives in it? Will the OS see this and software raid? (linux)
View 2 Replies
View Related
Feb 20, 2011
my problem here in not 'how to install ubuntu on an external HDD' but the thing is that after installation,i play around a bit in ubuntu(install on my external HDD). ok,so the external HDD is connected through usb. My problem is ,is it safe to install ubuntu on it? As i am using an external HDD from : Western Digital Element 500GB, so when i shutdown ubuntu ,i hear(from the external HDD) a sound like a sudden stop,for example,when you are playing a movie from it then ,you just unplug it.It not the sound when you make a safe remove,then unplug it. i am worried as it may cause some problem to my external HDD over time. So ,tell me,do you think i can go on with this?
View 1 Replies
View Related
Jun 9, 2011
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
View 1 Replies
View Related
Nov 11, 2009
I have an Acer netbook that I installed Remix on. Now I can't get the thing to boot from the CD drive which is connected via the USB port. Any suggestions? I set the boot order with the CD drive first and the HD last.
View 1 Replies
View Related
Apr 4, 2016
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case.
*windows 7 is on the internal hard drive and I excluded it from the boot sequence
* using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
View 7 Replies
View Related
Jul 31, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. Note: /dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.I have a 200GB IDE drive, /dev/sda that I use as a data drive.Both drives are accessible to 11.2 and in use.I installed OpenSuse 11.3 on /dev/sda in partition sda1. The same results occur with 32 bit and 64 bit distribution. I have grub for 11.3 on the the sda1 partition and chainload to it from 11.2 grub.
The installed 11.3 system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not appear to exist.I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps it is support of eSATA drives or the IDE to eSATA adapter that has regressed?
View 9 Replies
View Related
Dec 6, 2009
I have external hard drive which I used to connect via eSATA. I have edited fstab and it looks like that now: UUID=35C595D5738A319A /media/DATA ntfs auto,user,exec,suid,rw 0 0 The problem is that I can't unmount it as normal user, when do that, receive: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=35C595D5738A319A from /media/DATA
View 2 Replies
View Related
Jan 1, 2015
I want to know if it is possible to boot Debian from an external disk connected to an esata port which is plugged in as an expresscard.
A laptop I run Linux Mint on has an expresscard adapter which I plan purchase an esata card for. This would provide 2 esata ports.
I will have another harddrive with Debian installed.
I will then use an external enclosure to connect the Debian drive to the esata port.
I would then add a custom grub entry to point to the drive connected via esata over the expresscard adapter.
The expresscard requires drivers : [URL] ....
Does the environment of the initial grub screen have the necessary drivers to boot from the drive attached over the esata? Is there a way to load them?
Another solution mentions using kexec (first comment under question) : [URL] ....
This seems to require the drivers having been loaded too.
View 0 Replies
View Related
Jul 7, 2010
Anyone got any experience with eSATA cards and drives under RHEL4? I've got a client with two RHEL4 boxes that want to add eSATA cards and drives for backup purposes.
They really need to automount like a USB drive does, would RHEL4 automount eSATA?
View 5 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Sep 28, 2009
I have a Western Digital Pasport 320 GB hard drive. I wanted to create a live installation on it like a USB stick. I wanted it to serve as a portable OS that I could use to boot any other computer off of, and use it for diagnostics and anti-virus scanning on Windows based computers. The additional space is for my own personal use, kind of like having a mobile desktop where I have all of my documents in one place.What I need to know is how to set up Fedora 11 so that the hard drive will boot on most PCs regardless of their architecture. I also need to know what's a good Anti-virus to install onto it for the sake of fixing Windows hard drives.
Please keep in mind I'm a noob when it comes down to a lot of things, so if there's an antivirus I have to install manually, please included a step by step.
View 1 Replies
View Related
May 13, 2010
I initially installed OpenSuse on my Laptops internal drive (clean formatted) and everything worked fine. Later I took out laptop's hard drive and put it into a USB enclosure to use as an external drive.
View 1 Replies
View Related
Oct 19, 2010
I've pretty much installed Ubuntu Linux9.10, 10.04 and Debian 5 on external hard drives before, however, I just want to avoid certain pitfalls that may occur with openSUSE11.3. Has anyone successfully done this before? And, is it similar like Debian and Ubuntu installs in that you have to install the OS using an advanced option and specifying /dev/sdb, etc? Right now, I have Ubuntu installed on an external harddrive along with Debian as well and wanted to do the same for openSUSE11.3 and was wondering if all Unix derivatives share similar installation processes. I would just like to keep things as I have it currently where the system does not boot with Grub, and instead I have to go to the bios and specify which physical drive to boot from in order to change the boot order.
View 9 Replies
View Related
Apr 26, 2010
I disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ...
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
[code].....
View 6 Replies
View Related
Jan 10, 2011
My original intention was to install a distribution of Ubuntu onto an external hard drive so i can use it on different computers. I first downloaded and burned a copy of Ubuntu 10.10 and booted my Acer laptop to it. I then plugged in my external hard drive and tried to install ubuntu onto it by partitioning the external hard drive. After I did that, I booted from the external hard drive on my laptop and it ran the new distribution i created. However, when I tried to boot it from a different computer it said something like "partition not found." So the next time I tried to install ubuntu onto the external hard drive with out partitioning it, using the entire drive. This is what started to cause problems.
Now when I start up my laptop without the external hard drive plugged in i get "error: no such device: xxxx..... grub rescue>. When I start it up with the hard drive plugged in a grub comes up with the new installation, my old ubuntu installation, and my old windows vista.
View 4 Replies
View Related
Apr 25, 2010
Is it possible to install Linux on an external SATA drive?I have a system dual booting between OpenSuse and Windows XP. I wanted to see what other distros were like so I tried installing Ubuntu to my external SATA drive. After installing, I got an error from GRUB, and I had to recover my MBR.I tried the same thing with Mandriva, and got the same result. Finally, I tried another install of OpenSuse 11.2. The result was that I get a grub error 21. The only result of my efforts to try other distros is a lot of experience recovering my MBR.
View 9 Replies
View Related
