Ubuntu :: (11.04) Radeon 5700 Series : Catalyst Fails To Launch?
Apr 30, 2011
I really don't know what's going on here. I had Ubuntu 10.10 working great, and noticed 11.04 came out. I had been waiting a while and, for some reason, I decided to start with a fresh install rather than an upgrade.So basically here's what I've done so far:
- Installed Ubuntu 11.04 amd64
- Installed Opera, and XSensors
(sensors-detect only detected my GPU and CPU, not mainboard this time. But I can live with that.)
- Activated the FGLRX driver, rebooted.
---
- Tried to launch Catalyst Control Center, received this error message:
[Initialization error]
There was a problem initializing CCC Linux edition. It could be caused by the following.No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver apropriate for you ATI hardware, or configure using aticonfig.
View 3 Replies
ADVERTISEMENT
Jan 29, 2011
First problem is that there does not seem to be any Catalyst Control Center available for this driver. Is there one anywhere for Linux for this driver? The graphics card appears to be constantly at 99% usage at all times when simply sitting at the desktop. Is there a way to bring this down to virtually no usage like it should be at?
The display area on my monitor does not extend to the edges. In Windows, I can simply scale it to 0% to overscan in order to completely fill the screen inside the Catalyst Control Center; in Linux, I have been unable to do so with a monitor. Is there any way to scale the display area to completely fill my screen?
View 2 Replies
View Related
Jan 28, 2011
First problem is that there does not seem to be any Catalyst Control Center available for this driver. Is there one anywhere for Linux for this driver? The graphics card appears to be constantly at 99% usage at all times when simply sitting at the desktop. Is there a way to bring this down to virtually no usage like it should be at?
The display area on my monitor does not extend to the edges. In Windows, I can simply scale it to 0% to overscan in order to completely fill the screen inside the Catalyst Control Center; in Linux, I have been unable to do so with a monitor. Is there any way to scale the display area to completely fill my screen?
View 9 Replies
View Related
Jul 19, 2011
I've been on numerous websites--with tutorials telling how to install the ATI drivers, I'm running Squeeze 6.0.1 Gnome amd64, the tutorial I am using is located at the ATIProprietary Debian Wiki [URL] when I try the following:
sudo apt-get install fakeroot debhelper build-essential libstdc++5
I get this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package fakeroot is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source.
Package debhelper is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package 'fakeroot' has no installation candidate
E: Package 'debhelper' has no installation candidate
E: Unable to locate package build-essentials
E: Unable to locate package libstdc++5
E: Couldn't find any package by regex 'libstdc++5'
I have a feeling that apt-get is not searching the web, yet searching a CD perhaps? Because when I've tried the apt-get update, I get the following:
Ign cdrom://[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54] squeeze Release.gpg
Media change: please insert the disc labeled
'Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54'
in the drive '/media/cdrom/' and press enter
After doing that, nothing happens, and my apt-get still doesn't work, everything I try and install like build-essential says it's not found. Also when I
su
nano /ect/apt/sources.lst
the list in nano is empty???
I'm currently running a dual boot with windows xp/debian but as soon as I can get everything working, I'm going to turn this into a full linux system. Also my sound doesn't work, but my sound is HD sound that goes via the video card, I have it hooked up HDMI to my LG tv/monitor, sound works fine on xp. I think once I get the video card drivers installed it should possibly fix my sound issues at the same time.
View 14 Replies
View Related
Feb 6, 2010
So far everyone thats tried to help has mentioned modifying xorg.conf On this installation, there is no xorg.conf file. Anyone with video troubleshooting experience with ubuntu 9.10 ? I cannot even get 800x600 16 colors displayed correctly
View 2 Replies
View Related
Oct 11, 2010
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 3 Replies
View Related
Feb 10, 2010
I just bought a new ASUS laptop with the Mobility Radeon HD 5470 card.It seems like there's no driver for it yet (the amd.com download wizard is a dead end because I only find the HD 4000 series).
Is there anything I can do to get support for this card? At least I'd like to be able to change resolution. Or do I simply have to wait for a new ATI driver?
View 3 Replies
View Related
Jun 14, 2010
I'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies
View Related
Oct 10, 2010
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies
View Related
Sep 7, 2010
I haven't paid attention to this before (there are too many monitors around here). But I just noticed a display problem with fglrx on HD 2400 XT (iMac) : parts of pages get covered with gray or black while scrolling up and down in Firefox.
I did reboot that machine a couple times and switch the driver to reproduce the problem. It never occures with either radeon or radeonhd.
View 2 Replies
View Related
May 2, 2011
I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
View 5 Replies
View Related
Mar 9, 2009
I have a computer with an integrated graphics card. It is ati radeon xpress 200 series. It have installed OpenSuse 11.1 on my computer with KDE 4.1. I have heard that we have to manually install ati and nvidia drivers. Or can the open source drivers run my card. has the drivers for my card already been installed. Or should i install it manually. I donot have an internet connection on my pc. but i can download the required files from another computer and bring them to my pc.
View 3 Replies
View Related
Sep 5, 2011
Similar to the other threads, but a completely different card/manufacturer. The others were mostly Nvidia. I have a dial boot machine, HP PAvillion with Windows 7 and now openSUSE, 11.4.
One (of my many problems right now!) is the screen / monitor constantly blinks/flashes/blanks. About every 15-20 seconds, it will go black for about 1-2 seconds and then come right back.
I was using KDE the first go around, and have since re-installed and am now running Gnome. I switched to Mint in between and did not have this problem. Also, I do not appear to have this happen at the logon screen. I have also tried ubuntu and didn't have the problem. I have checked the screen saver settings, and power save options and have them set to off and a couple of hours respectively. I have also modified the xorg.conf.d file to hard code the monitor settings. (Dell 23"). The card is Dual DVI out, and I have it converting to VGA to the monitor.
View 3 Replies
View Related
Jul 11, 2014
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
View 1 Replies
View Related
Feb 17, 2010
I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.
View 6 Replies
View Related
Jan 12, 2010
I have Slackware 13.0 installed with the newest stable kernel (2.6.32.3) on an hp notebook with ati hd3200 igp. What happens is that when I try to buildpkg the catalyst drivers, it fails on the new kernel but not on the original one. I've been searching for a solution for a few days now. found a few that involved patching some files, but none seem to work or I can't make them work. I could probably use the binary installer but I would prefer not to.
Here's the output:
Code:
sh ./ati-driver-installer-9-11-x86.x86_64.run --buildpkg Slackware/Only_Module
Created directory fglrx-install.hokais
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.672......
ATI Technologies Linux Driver Installer/Packager
Generating package: Slackware/Only_Module .....
View 3 Replies
View Related
Feb 27, 2010
I installed it yesterday. It worked well. I was able to log into windows without any trouble and restart into Ubuntu without a hitch.
This morning I launched Ubuntu as usual vi GRUB. I was asked to install about 135 upgrade files, which went withou an apparent challenges. I then went through the restart and noticed that there was an extra two choices in GRUB, but I just left it to launch Ubuntu automatically. Which it did.
I then messed about with the appearance settings. Noticed a some more updates were waiting which included 49 files. I went through the updating process and restart.
GRUB worked well, and I was soon loggin in with username and password.
The Ubuntu Screen became visible with the flashing horizontal line and about 3 seconds later everything froze. I waited for several minutes - I timed them - but still no progress - everything remained frozen.
I switched off the machine completely, as I knew of no other way to get out of this situation. I rebooted and when GrUB launched I booted into windows 7 with absolutely no problems.
I used restart in windows and then allowed GRUB to boot into Ubuntu. Once more I was able to log in but soon after the Ubuntu Screen appeared and the horizontal line flashed for a few seconds, everything froze. This time I waited five minutes before switching off the machine by disconnecting at the mains.
I am now using windwos 7 to make contact
View 4 Replies
View Related
Jul 9, 2010
i have a problem "db2 express-c first steps fails to launch on ubuntu" then firefox appears it shows something like :
Quote:
First Steps was unable to connect to the online DB2 Information Center and could not find an instance of a locally installed DB2 Information Center for this version of the product.The use of First Steps to access product information requires one of the following types of connections to a DB2 Information Center. Internet access to the online DB2 Information Center A locally installed version of the DB2 Information Center Access to a remotely configured DB2 Information Center
View 1 Replies
View Related
Jun 19, 2010
I have done a clean install of Lucid netbook remix on a Dell mini-12 laptop.
Finally managed to get the broadcom wireless driver packages and poulsbo drivers to install correctly and decided to install all the offered updates.
After reboot I get the menu bar at the top but then desktop flashes between white and my background image for ages but does not give me the normal netbook tabs etc.
If I try a restart I get a pop-up saying 'Netbook Launcher is not responding'.
View 2 Replies
View Related
Nov 7, 2010
I have downloaded wubi.exe to my hard drive. After double clicking the exe and OKing the security dialog, I get a error message box titled: "pyrun.exe - No Disk"The error message reads:"There is no disk in the drive.Please insert a disk into the drive DeviceHarddisk3DR5.There are three buttons: Cancel, Try Again, ContinueClicking any of these buttons simply causes the same message box to pop up over and over. I cannot cancel this message or the process unless I reboot my computer. I guess the latest version of Wubi does not run on Windows 7 Ultimate.My computer:Intel Pentium I76GB RAM1TB Hard Disk
View 4 Replies
View Related
Aug 1, 2009
ok I cannot be the only one having this issue?
grabbed the latest from mozilla...
thunderbird 2.0.0.22
i run:
./thunderbird
and get this:
./thunderbird-bin: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
[Code]...
View 1 Replies
View Related
Jan 21, 2011
When ever i try to open a document or even just a blank page with openoffice I get this message from the automatic bug reporting tool
Package: openoffice.org-impress-1:3.3.0-19.2.fc14
Latest Crash:Fri 21 Jan 2011 05:50:48 PM
Command: /usr/lib64/openoffice.org3/program/simpress.bin -impress
Reason: Process /usr/lib64/openoffice.org3/program/simpress.bin was killed by signal 11 (SIGSEGV)
Comment: None
Bug Reports:
I run Fedora 14 64 bit gnome desktop
View 2 Replies
View Related
Aug 2, 2011
Basically, the problem is, we have a bunch of computers in a computer lab, that we want to students to access, but not modify in ANY way. That includes backgrounds or whatnot. And after restart, any changes they may have made, change back. Also, they can't have read access to the administrator account on the computer.
This needs to give a permission denied, or something:
Code:
cd /home/(admin account username)
ls
The Guest Session is exactly what we are looking for, but try as I might, I can't get it to work. Because, we don't want to have to login as administrators, then activate guest session, just for our students to use the computers. The idea being, we can leave the computers in there, and not worry about the students breaking anything.
One thread I tried was: [URL]. However, using his method, will log the student into the account, and after about 5 seconds, log them back out.
The other method listed lower in the thread,
Code:
/usr/bin/guest-session
Seems to work, but upon logging out, fails to launch the gdm
Only way to restore is restarting the computer.
View 9 Replies
View Related
Jan 9, 2011
I have installed openoffice.org-base and openoffice.org-base-core in an updated fedora 14 environment. Clicking on openoffice-base in applications->office->openoffice-Base fails to lauch with the message:"This operation is not supported onhis operating ystem."Installation of mysql and mysql-server does not help.
View 14 Replies
View Related
Jan 2, 2010
I've never played with XBMC before and I installed it today on my openSUSE 11.2 64bit system using Yast. I found the package and installed it just fine, but when I try to launch XBMC from the applications menu, the screen flickers once but then nothing happens. Here's the output:
[Code]....
View 1 Replies
View Related
Nov 12, 2010
I have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
[weaz ~]$ uname -a
Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
[code].....
View 6 Replies
View Related
May 24, 2010
i have to grep a series say 98782 from a group by series in a file ,how can i grep the series.
View 6 Replies
View Related
Aug 31, 2010
I just finished building my new machine. I've got windows 7 running just fine on it, but I wanted to dual boot Ubuntu 10.04. I downloaded the 64 bit iso and tried installing it from both a live cd and a usb drive. When I boot from either (cd or usb), I see the Ubuntu loading/boot screen, but after the data is loaded, my display goes black and seems not to be able to find a signal. I assumed initially that it was probably due to the fact that I was connecting to my tv by HDMI cable. I guessed that Ubuntu did not have HDMI drivers for my video card, ATI Radeon HD 5750, by default. Then today, my new monitor arrived and I switched to the DVI output on my video card. I assumed that this would allow me to boot and install. I was wrong. I experienced the same symptoms on my monitor via DVI as I did on my TV via HDMI. why my monitor drops the signal as soon as it leaves the loading/boot screen?
View 9 Replies
View Related
Oct 5, 2010
I am attempting to launch kate via kdesu as well as from the command line and it fails both times. I have (after the first failed attempt) coppied my .kde folder to /root and still am not able to launch it (it works fine under my login). The following is what I get after removing my personal .kde folder from root and launching kate: kate(16689): Session bus not found
KCrash: Application 'kate' crashing...
sock_file=/root/.kde/socket-debian/kdeinit4__0
Warning: connect() failed: : No such file or directory
KCrash cannot reach kdeinit, launching directly.
drkonqi(16694): Session bus not found
View 6 Replies
View Related
May 16, 2011
Recently, for whatever reason (I am led to suspect a bad hard drive), Windows 7 failed to boot even in safe mode so I decided to just use a clear hard drive and install a far less troublesome OS, so I decided to try to use openSUSE. I used a backup laptop to download and burn the 4.7 GB release. Problem is, I haven't a clue how to get it to work. I thought just placing the burned DVD in when booting would be enough, but the BIOS keeps telling me it fails to launch from CD. Luckily, I had enough foresight to download a live CD just in case. I was able to install from the live CD, and when I checked the DVD, I was able to access all the content.
But I haven't a clue how to use it to upgrade/install all the extra software. Also, I should add I am completely new to this whole thing. While I have used Linux before, for the most part others dealt with all the administrative aspects of ensuring the system actually ran/had the needed software on it. Finally, I have one major restriction placed on this whole issue. I live out in the middle of no-where and the only internet I can get is limited to 200MB a day (I downloaded the CD/DVD elsewhere, but normally don't have a chance to do that). As such, being able to install from the DVD and not needing to download much software would be nice.
View 1 Replies
View Related
