I installed it yesterday. It worked well. I was able to log into windows without any trouble and restart into Ubuntu without a hitch.
This morning I launched Ubuntu as usual vi GRUB. I was asked to install about 135 upgrade files, which went withou an apparent challenges. I then went through the restart and noticed that there was an extra two choices in GRUB, but I just left it to launch Ubuntu automatically. Which it did.
I then messed about with the appearance settings. Noticed a some more updates were waiting which included 49 files. I went through the updating process and restart.
GRUB worked well, and I was soon loggin in with username and password.
The Ubuntu Screen became visible with the flashing horizontal line and about 3 seconds later everything froze. I waited for several minutes - I timed them - but still no progress - everything remained frozen.
I switched off the machine completely, as I knew of no other way to get out of this situation. I rebooted and when GrUB launched I booted into windows 7 with absolutely no problems.
I used restart in windows and then allowed GRUB to boot into Ubuntu. Once more I was able to log in but soon after the Ubuntu Screen appeared and the horizontal line flashed for a few seconds, everything froze. This time I waited five minutes before switching off the machine by disconnecting at the mains.
i have a problem "db2 express-c first steps fails to launch on ubuntu" then firefox appears it shows something like :
Quote:
First Steps was unable to connect to the online DB2 Information Center and could not find an instance of a locally installed DB2 Information Center for this version of the product.The use of First Steps to access product information requires one of the following types of connections to a DB2 Information Center. Internet access to the online DB2 Information Center A locally installed version of the DB2 Information Center Access to a remotely configured DB2 Information Center
I have done a clean install of Lucid netbook remix on a Dell mini-12 laptop.
Finally managed to get the broadcom wireless driver packages and poulsbo drivers to install correctly and decided to install all the offered updates.
After reboot I get the menu bar at the top but then desktop flashes between white and my background image for ages but does not give me the normal netbook tabs etc.
If I try a restart I get a pop-up saying 'Netbook Launcher is not responding'.
I have downloaded wubi.exe to my hard drive. After double clicking the exe and OKing the security dialog, I get a error message box titled: "pyrun.exe - No Disk"The error message reads:"There is no disk in the drive.Please insert a disk into the drive DeviceHarddisk3DR5.There are three buttons: Cancel, Try Again, ContinueClicking any of these buttons simply causes the same message box to pop up over and over. I cannot cancel this message or the process unless I reboot my computer. I guess the latest version of Wubi does not run on Windows 7 Ultimate.My computer:Intel Pentium I76GB RAM1TB Hard Disk
grabbed the latest from mozilla... thunderbird 2.0.0.22 i run: ./thunderbird and get this: ./thunderbird-bin: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
When ever i try to open a document or even just a blank page with openoffice I get this message from the automatic bug reporting tool
Package: openoffice.org-impress-1:3.3.0-19.2.fc14 Latest Crash:Fri 21 Jan 2011 05:50:48 PM Command: /usr/lib64/openoffice.org3/program/simpress.bin -impress Reason: Process /usr/lib64/openoffice.org3/program/simpress.bin was killed by signal 11 (SIGSEGV) Comment: None Bug Reports:
I really don't know what's going on here. I had Ubuntu 10.10 working great, and noticed 11.04 came out. I had been waiting a while and, for some reason, I decided to start with a fresh install rather than an upgrade.So basically here's what I've done so far:
- Installed Ubuntu 11.04 amd64 - Installed Opera, and XSensors (sensors-detect only detected my GPU and CPU, not mainboard this time. But I can live with that.) - Activated the FGLRX driver, rebooted. --- - Tried to launch Catalyst Control Center, received this error message: [Initialization error]
There was a problem initializing CCC Linux edition. It could be caused by the following.No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver apropriate for you ATI hardware, or configure using aticonfig.
Basically, the problem is, we have a bunch of computers in a computer lab, that we want to students to access, but not modify in ANY way. That includes backgrounds or whatnot. And after restart, any changes they may have made, change back. Also, they can't have read access to the administrator account on the computer.
This needs to give a permission denied, or something: Code: cd /home/(admin account username) ls
The Guest Session is exactly what we are looking for, but try as I might, I can't get it to work. Because, we don't want to have to login as administrators, then activate guest session, just for our students to use the computers. The idea being, we can leave the computers in there, and not worry about the students breaking anything.
One thread I tried was: [URL]. However, using his method, will log the student into the account, and after about 5 seconds, log them back out. The other method listed lower in the thread, Code: /usr/bin/guest-session Seems to work, but upon logging out, fails to launch the gdm
I have installed openoffice.org-base and openoffice.org-base-core in an updated fedora 14 environment. Clicking on openoffice-base in applications->office->openoffice-Base fails to lauch with the message:"This operation is not supported onhis operating ystem."Installation of mysql and mysql-server does not help.
I've never played with XBMC before and I installed it today on my openSUSE 11.2 64bit system using Yast. I found the package and installed it just fine, but when I try to launch XBMC from the applications menu, the screen flickers once but then nothing happens. Here's the output:
I am attempting to launch kate via kdesu as well as from the command line and it fails both times. I have (after the first failed attempt) coppied my .kde folder to /root and still am not able to launch it (it works fine under my login). The following is what I get after removing my personal .kde folder from root and launching kate: kate(16689): Session bus not found
KCrash: Application 'kate' crashing... sock_file=/root/.kde/socket-debian/kdeinit4__0 Warning: connect() failed: : No such file or directory KCrash cannot reach kdeinit, launching directly. drkonqi(16694): Session bus not found
Recently, for whatever reason (I am led to suspect a bad hard drive), Windows 7 failed to boot even in safe mode so I decided to just use a clear hard drive and install a far less troublesome OS, so I decided to try to use openSUSE. I used a backup laptop to download and burn the 4.7 GB release. Problem is, I haven't a clue how to get it to work. I thought just placing the burned DVD in when booting would be enough, but the BIOS keeps telling me it fails to launch from CD. Luckily, I had enough foresight to download a live CD just in case. I was able to install from the live CD, and when I checked the DVD, I was able to access all the content.
But I haven't a clue how to use it to upgrade/install all the extra software. Also, I should add I am completely new to this whole thing. While I have used Linux before, for the most part others dealt with all the administrative aspects of ensuring the system actually ran/had the needed software on it. Finally, I have one major restriction placed on this whole issue. I live out in the middle of no-where and the only internet I can get is limited to 200MB a day (I downloaded the CD/DVD elsewhere, but normally don't have a chance to do that). As such, being able to install from the DVD and not needing to download much software would be nice.
Fresh guest install of current as of changelog dated 16-Feb-2011, in to VirtualBox 4.0.4 (13.1 x86_64 host).
1. About 6 of the icons normally residing in the top half of Settings Manager are missing (names are their and functions work). Selecting 'Appearance -> Icons' and re-selecting the one choice available restores one, the rest remain MIA.
2. Default xfce Terminal launch fails with error <????> Re-selecting the default 'Preferred Applications -> Utilities -> Terminal -> Xfce Terminal' has no effect. 'Properties' shows the usual 'exo-open --launch TerminalEmulator'.
Setting 'Preferred Applications' to 'X Terminal' launches an xterm successfully as expected.
I have a 14TB raid, file system is read-only and I am trying to run e2fsck -B -p -C -v -y /dev/sdb1, it goes through, but fails and says bad block/inode or fails to transfer, something like that.Is there a way I can get this to run successful, this is a production storage server, its critical.
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
I have been using ubuntu since 10.04 version and configure with compiz to activate the corners, cube, etc. No problems with that. When I upgraded to 11.04 these things were not working but honestly I did not care that much and was just playing with compiz, so I was playing with an option in compiz about the size of the icons in the new 11.04 launch bar, just when I clicked it my top bar and launch bar are gone and not coming back after rebooting many times. BTW I already uninstalled compiz via terminal and the same problem is happening, maybe important for you to know (alt+f2 or other shortcuts not working except for ctr+alt+t)
I am attempting to use tomboy and it does not launch giving me the following: Code: ~$ tomboy
(/usr/lib/tomboy/Tomboy.exe:3602): GLib-WARNING **: g_set_prgname() called multiple times (/usr/lib/tomboy/Tomboy.exe:3602): GLib-WARNING **: g_set_prgname() called multiple times [INFO]: Initializing Mono.Addins
[Code]...
installing all the packages again without comment or error, but the problem persists with exactly the same error as above.
I am running Kubuntu 10.04 and i want to make some icons on the desktop to launch various telnet sessions. So i make a .sh using vi test.sh and then put in telnet 180.9.x.xx and save and quit. Then i chmod 777 it to make it executable and then moved it to my Desktop folder. But when i double click or right click and open with konsole nothing happens. I know it is probably something stupid which i have overlooked but when i have done this in Ubuntu in the past it has worked.
I have an acer aspire one. I had iPC osx86 10.5.6 installed on it. then I installed ubuntu 10.04.1 and now i cant get OSX to start up. OSx shows up in grub but when i select it i just get a blank screen.
I downloaded the current version of Sigil 64bit from Google Code https://code.google.com/p/sigil/ and it is just not working. Whenever I try to launch it the screen appears for less than a second and then vanishes. Does anybody know how to fix this?
[URL]theres a thread asking to issue commands to one tty from another, i'd like to know, if there's a way this can be done without screen, and so that you could issue commands to the gui, from other tty.
Is that possible to ssh to a box and launch a programme, say firefox, have the session disconnet when not using it and then you can reconnect to the same session again?
i've been looking for an answer to this for a few days now before i decided to post. i have a simple script that works perfectly if launched manually from an xterm window. the script has been already been chmod +x.
i have my account set to autologin to an xterm session. i have symlinks in rc2.d and the script itself in init.d. i can't find any clear explanation of where i need to put my script to it launches itself right after my account logs into an xterm session. i can ./script after my xterm session starts and everything works fine but i just cannot find where to put it so it launches after my acct auto logins.
I did a install of 9.10 on a Lenovo T61p a few weeks back. The install went seamlessly and everything was running along just fine, then suddenly, I'm having the problem that every time I go to launch a new window, it takes 30 - 40 seconds for the window to launch. Once the window is launched, performance seems normal, with one exception. When I go to launch Nautilus from the "Home Folder" menu under "Places", it takes 30 - 40 seconds to launch the window, then another 10 -15 seconds for the folder items to appear. If I click to descend into a folder, it takes 10 - 15 seconds for the folder contents to appear. This stuff was all instantaneous.
I made an error by downloading and installing a new version of firefox. I do not manage any more to install the flash! I would also play World of warcraft but I have a little problem. I know it is not precise. But my english teacher would we make a discussion of anything in English, for 30 minutes. Thus it would be cool if anybody can contact me on <snip.> We could discuss about these problems with skype.
Since I upgraded to 10.04, I went to launch gDesklets, and it will not launch. I looks like it wants to, spinning cursor and bar down in the task bar panel, but then it disappears.
