My remote machine did an update which required a restart, after the restart i cant see the screen with VNC, is their a way to log in remotely?
I've heard that the login file can be configured to auto login to circumvent this problem, i've got the file /etc/logins.??? but what do i need to change to make logins automatic?
I am trying to copy the file on remote server, but I am getting error " ssh: connect to host 172.28.21.14 port 22: Connection timed outlost connection "My two server are bastion10 and newlink, I want to copy file from newlink to bastion10 buet unable. I am able to ping, when i run " lsof -i :22 " command on link3new server I am getting
link3-new:lsof -i :22
sshd 6992 root 4u IPv6 11878 TCP *:ssh (LISTEN)
while on bation10 it is ( ESTABLISHED ) ..
from a local machine i connect to the remote via the terminal:$ ssh -X john@192.168.1.248 VirtualBoxthe vb dialog box appears with the list of the virtual machines on the left hand side, just as if i was runing it locally, but when i try and start one of the machines it crashes the connection!why dose it crash the connection and what can i do to make this work?
View 1 Replies View RelatedI didn't setup our old system but that server has since been retired due to hardware failure, but we have some new webervers, and a new postgtres database server in place which I need monitoring. Some items include database size, transactions per second, io stats, memory monitoring, or as the DBA put "anything I can get". We had used CACTI in the past for these items, but I didn't do the setup and sondering if that is what is recommended, or something else. I am looking at groundwork open source which include nagios, etc. but figured I would consult the uforums since all these servers are running userver 9.x and 10.x .
View 3 Replies View RelatedI am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
I like very much the Guest Session feature of Karmic, it comes very handy when someone needs to use your computer. However, it's only available if I'm already logged in, it won't show this option at login screen. Is there any way to make this possible? Also, I once tried the guest session and configured its appearance to my taste. The next time I entered, though, the default desktop reappeared. I know this happens because no setting is permanently stored for this session, so the only solution I can think of is to change the default configuration it is loaded from.
View 4 Replies View Relatedconfigure SSH to display a warning banner at login
View 1 Replies View RelatedI want to run a command every time I log in to my Ubuntu box, but only if I'm connecting through telnet, not if I'm logging in at the console.
View 1 Replies View Relatedi am having a problem concern zlib installation.i tried configure file successfully but make file displayed some errors.that usr/linux/limits.h not found.so i found that i have to install glibc-headers-devel...but there is no such a kind of package in ubuntu repository?/????/some people saying that libc6-devel is equal to them!
View 1 Replies View Relatedi'm new to linux and i am running ubuntu 11.04.i'm trying to install wine. i downloaded the binary files and extracted them. i tried running the command './configure' and got a error saying :no such file or dir. i read the 'readme' file but cannot configure.
View 3 Replies View RelatedI'm on F14 and can't seem to get NetworkManager to behave. I seem to remember being able to start my machine and see my static address configured right after boot. For some reason, that's no longer the case. When I finish a boot, I'm not getting any address until I log in. I've tried editing the ifcfg-eth0 both by hand and by the system-config-network. I've played with the "Available to all users" checkbox on both the nm config applet as well as the system-config-network gui. I can't seem to get it to behave predictably and give me my static without having to be in a gnome session.
Here's my ifcfg-eth0 from /etc/sysconfig/network-scripts
I have two servers running Linux 2.6.9 kernel.When i telnet to server1 , the telnet will be disconnected only after 3 login failures. While, when i telnet to server2, telnet will be disconnected after the first login failure.expect server2 to behave the same way as server1 when telnet is executed.Kindly tell me where i should tweak my servers so that i could achieve what i expect.
View 1 Replies View RelatedI want to configure file printer (print to file) on my rhel-5 machine in such a way that if users fire print command from windows xp it should create an individual computer wise txt file on my linux machine. File name should be different for each printer.
View 2 Replies View RelatedI want to install a program from this website http:[url].... and i download the option " hydra-6.3-src.tar.gz".i tried following the instructions on this page: https:[url].... but when i get to the ./configure step it says "bash: ./configure: No such file or directory"
View 9 Replies View RelatedI just installed Debian 6.0 (squeeze) on my laptop with the GNOME 2.30 desktop on my Toshiba Satellite A100-VA3 laptop. I have never used GDM3. How do I configure GDM and customize my login screen and wallpaper?
View 3 Replies View RelatedI downloaded the lastest x86 stable release of openfiler and installed it on VBOX durring the install I selected to manually do the partitions and added a
/boot
swap (x2 ram)
/
Partition scheme. I selected DHCP client on the network configuration. Now from what I understand once I have done that I should be able to point my browser to https:<IP>:446 and login as root and configure everything within the GUI. But when I log in there is nothing to configure. My host system is Ubuntu x86_64 4GB Ram amd dual core processor.
I have installed ipcop v 1.4.21, and addons TCAR and Ipcop-Advanced proxy.Now i want a login script for users on the green interface. So that when they start using internet, they first receive login page (or even through a login url page), and if they are idle for particular time, they should disconnect automaticaly. and users can check their bandwidth usage and time usage on this page.
View 1 Replies View RelatedIm trying to install a program (Celtx, a media pre-production assistant) that Ive downloaded as tar.bz2 file. Ive unpacked it, moved it into my Home folder, and then wanted to configure, make and install it through the terminal.
However theres no configure file (and no readme, help or install file either for that matter).I can cd to the Celtx folder in the terminal and then start the program with ./celtx but thats a bit tedious.How would I install it 'properly' if the ./configure command doesnt work?
All I need to do is get my screen resolution to 1024x768, I can currently only get 800x600 and that's unacceptable for school. I created an xorg.conf file in Lucid and it does in fact refer to and use it. what led me to believe that is when I looked in the mirror and noticed smoke slowly rolling out of my ears! After replacing some of that smoke with a cigarette I decided to make this thread. As I said, I created the xorg.conf.new file with:
Code:
sudo Xorg -configure from recovery mode. And then moved it to its proper place with:
Code:
cp /home/william/xorg.conf.new /etc/X11/xorg.conf
And that nested it right where it needs to be. X does in fact use it as confirmed by my Xorg.0.log.
Now I have an xorg.conf file, but am quickly becoming overwhelmed with information as to what to do. I've tried to create mode lines with xrandr, which gave me new settings, but I was unable to use them. Obviously the EDID info. is not being read because there is no mention of clock speed, Vsync or Hsync in my Xorg.0.log either. I have tried many things and really don't have time to spend all day at my computer, at least not with this issue. I'm in school and have to focus primarily on that right now. I will give what info I know is relevant starting with my monitor specs:
Dynex DX-LCDTV19
vertical resolution: 720 p
aspect ratio: 16:10
screen refresh rate: 60hz
comb filter: 3D/YC digital
[Code].....
Ubuntu 10.04
I booted to command line only and entered the following command: Sudo Xorg -configure > xorglog.txt
the command seems to run just fine and does create a new xorg.conf.new file but I would like to see all the output of the Xorg -configure command but it just scrolls by too fast and I can't go back to see it. Hence this is why I'm trying to do the > . It seems to ignore the >.
how I can see what the command is doing?
I'm trying Talika on a Xfce. I really like it, but cannot manage to configure it by right click. Might be because I'm running it trough Xfapplet? Anyway is there any way to configure it, any text file...I searched it on ~/.configure but nothing there. As well on internet I couldn't find any solution. I know Xfce has an own iconozed dockbar applet, but I guess Talika is more configurable. Or there is any tweak for the inner dockbar applet on Xfce?
View 1 Replies View RelatedI need to use MFix a open source program Therefore, because i don't have Linux on my computer i use Cygwin_NT-5.1 the latest version. From the help desk they told me that i need to configure a file to fit with my system. I just changed operation system to CYGWIN_NT-6.0 (instead of the command uname -s ; set opsys=$1. this was the only way i had an idea to do it, so i tell the programm that my sytem is a 6.0 but it isn't
then i wanted to install mfix and it gives me the error
../../model/make_mfix: line 119: syntax error near unexpected token '('
../../model/make_mfix: line 119: 'echo -n "Do you need debug version? (y/n) [no] "'
by looking in he make_mfix file it looks like this echo -n "Do you need debug version? (y/n) [no] "
It functions perfectly well, but the Files & Folders object has as a feature a 'recent' section which displays recently opened files. This is much the same as a menu object available in Gnome, except with the latter you could clear recent files for security or privacy purposes - you cannot do this in Unit.I have found that if you drag a file from the 'recent' section in the Unity Files & Folders object to Trash it doesn't just delete the shortcut - it deletes the target as well.
It is not at all clear if and how you can configure the File & Folders and the Applications objects to display what you want rather than the default, and the inability to quickly and safely clear recently opened items is something I think is in need of a fix.
How to configure File Sharing server which will be in the same network along with Windows DNS servers and others.Googling showed me that "Samba server" will do the job of file sharing . Okay samba server is configured on Ubuntu Linux machine but how to add this to the existing domain where windows machines are ? Do i have to really add this Samba server to windows Active directory or adding it in the network will do? Please also help me in configuring samba server security and the ease of user access of the data on the server.
View 2 Replies View Relatedcan any tell me how can I configure OpenSuse for login session (kde/gnome) using a certificate in a SmartCart (spanish DNIe).
View 5 Replies View RelatedI'm installing a tool on Linux system.For this installation, i didn't have the installation document. I got to know that have to create configure file from the bin folder
View 1 Replies View RelatedWhen I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies View RelatedI have recently installed Ubuntu Karmic on my laptop, which also has Windows 7. It now has GRUB, and I have been able to modify some settings via the GRUB command line. However, these changes are not permanent; they are reset the next time I load GRUB. I have seen many people trying to configure GRUB who have been pointed towards /boot/grub/menu.lst. I expect it would) I went to edit that file... and discovered that it did not exist. I am certain that I am using GRUB, not some other bootloader. Is there another possible way to configure GRUB, or somewhere else I might look for this file?
View 4 Replies View RelatedI'm having problems configuring my virtual hosts file properly The site [URL]... opens on http and https The site 10.0.1.3/myapp/ works
I am trying to redirect all traffic from [URL].... to [URL].... while maintaining access to [URL]....
[Code]....