General :: Configure A File To Fit With System
Oct 7, 2010
I need to use MFix a open source program Therefore, because i don't have Linux on my computer i use Cygwin_NT-5.1 the latest version. From the help desk they told me that i need to configure a file to fit with my system. I just changed operation system to CYGWIN_NT-6.0 (instead of the command uname -s ; set opsys=$1. this was the only way i had an idea to do it, so i tell the programm that my sytem is a 6.0 but it isn't
then i wanted to install mfix and it gives me the error
../../model/make_mfix: line 119: syntax error near unexpected token '('
../../model/make_mfix: line 119: 'echo -n "Do you need debug version? (y/n) [no] "'
by looking in he make_mfix file it looks like this echo -n "Do you need debug version? (y/n) [no] "
View 2 Replies
ADVERTISEMENT
May 17, 2010
I need to enable GFS for a shared storage file system, I need to share it to different ip's so that every one get syn data on that file system
ex : /data on 192.168.0.10
I need /data to be in GFS and need to share to 192.168.0.20 & 192.168.0.21
so that this two machines can have sync file system
/data is in shared storage
View 1 Replies
View Related
Aug 9, 2011
I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
View 3 Replies
View Related
Jun 29, 2010
i am having a problem concern zlib installation.i tried configure file successfully but make file displayed some errors.that usr/linux/limits.h not found.so i found that i have to install glibc-headers-devel...but there is no such a kind of package in ubuntu repository?/????/some people saying that libc6-devel is equal to them!
View 1 Replies
View Related
May 23, 2011
i'm new to linux and i am running ubuntu 11.04.i'm trying to install wine. i downloaded the binary files and extracted them. i tried running the command './configure' and got a error saying :no such file or dir. i read the 'readme' file but cannot configure.
View 3 Replies
View Related
Oct 20, 2009
I want to configure file printer (print to file) on my rhel-5 machine in such a way that if users fire print command from windows xp it should create an individual computer wise txt file on my linux machine. File name should be different for each printer.
View 2 Replies
View Related
May 7, 2010
My program (GTK) runs in Linux (Ubuntu) without any problem and its themes are fine but when I change my system to run just X and then my program, it runs but without any theme. How can I configure my system to use theme in X for my program?
View 2 Replies
View Related
Apr 11, 2011
Its very easy to make DSL connection in the windows operating system.But I do not know how to configure my system to make connection on Linux.Anyone can suggest me what type of modem and router i should have to use to make a connection on the linux.If there any commands to make connection then mention it.
View 2 Replies
View Related
May 18, 2010
I'm writing a phone app for Android that connects to a bluetooth RFCOMM device in my car. My phone app talks AT commands with it. For development work, I often need to communicate with the device to try different commands and things.
My neighbors are starting to think I'm weird because I sit in my car for hours on end with my laptop screen shining on my face, typing away like a script kiddie.
I'd much rather configure one of my many Linux servers to act as a bluetooth RFCOMM device and allow me to connect to it (indoors, while I sit on my couch).
I imagine I have to start with something like
sdptool add SP
But then what?
I'm perfectly happy writing a perl app to handle the I/O, but I just don't know how to make the bluez stack accept connections and subsequently pipe that stream to a perl app.
View 2 Replies
View Related
Jan 8, 2011
I am new Linux, but have already installed a new HDD in my PC and successfully installed Fedora 14. Unfortunately, I am unable to configure my system for dual boot and my PC always boots right up into Windows Vista which is the original OS on my original HDD. I have searched the web, but only find examples of splitting partitions and dual booting into different versions of Windows. I apologize for the simple question, but I am certain that someone in here can point me in the right direction. My intention is to migrate to Linux entirely, but want to learn Linux before completing a full migration.
View 4 Replies
View Related
Apr 3, 2010
I am using both suse linux and scientific linux 4.6. my ether net card is RTL8111/8168B PCI Gigait.In suse i can configure internet and its working fine.
1. How to configure network in scientific linux 4.6 ? which driver should i install ? i don't find any driver corresponding to to this Ethernet card.
2.how to configure epiphany web browser in suse 11.0 ? it is not working.
View 7 Replies
View Related
Aug 9, 2010
I'm having some difficulty to confgure the windows X manager...
I can't find /etc/X11/xorg.conf
I'm trying to do this in opensuse 11.1 and fedora 12
I tried to install in fedora yum install system-config-display but I think that isn't the best thing to do...
And can anyone tell me a distribution that use XFree 86.4.4.x?
Opense suse, Fedora and Ubuntu use X.org-X11 isn't it?
View 10 Replies
View Related
Aug 1, 2011
I'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:
View 2 Replies
View Related
Apr 4, 2010
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies
View Related
Mar 19, 2011
I found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
View 3 Replies
View Related
Apr 6, 2010
i have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies
View Related
Feb 17, 2011
I installed a library to the /usr/local/ prefix in Linux using ./configure && make && make install. What environment variables do I need to set in order for the linker and compiler to search these new library and header paths?
View 1 Replies
View Related
May 21, 2010
I am trying to configure a system to boot Windows XP, CentOS 4 and RHEL5. I have one hard drive that contains both Windows XP and CentOS 4, and a separate drive that contains RHEL5. Until recently, I only had one SATA cable, so I could only connect one drive at a time. Under this configuration, everything works fine. When the RHEL5 drive is connected, I can boot into it. When the Windows/CentOS drive is connected, I can dual-boot into either OS. (GRUB was configured on this drive automatically when I installed CentOS into a new partition.)
Opening the box and moving the SATA cable is a lot of trouble, so I finally got a second SATA cable and enabled both SATA0 and SATA1 in the BIOS. I currently have the Windows/Centos drive as the primary, and I can still boot into both Windows/Centos. Now, I want to add RHEL5 to menu, but I can't find the file GRUB is using to present its menu at startup.
I have configured GRUB before on other systems, but I just know the very basics, such as where the grub.conf file should be. So, I spent a whole day reading advice online and asking friends who might have experience with these issues. Here are the steps I have taken so far:
I confirmed there is no /boot/grub directory, and /etc/grub.conf is a broken soft-link to /boot/grub/grub.conf. I did a find for grub.conf, which found nothing. I did a find for menu.lst, which found one item -- an example GRUB config file in /usr/share/doc/grub-0.95. I noticed that when CentOS boots, I see the GRUB commands printed to the screen, the first of which is:
root (hd0,2)
So, I did a grep -R "(hd0" * at the / directory, which also found only one item -- the example menu.lst file in /usr/share/doc/grub-0.95. I discovered that I can go to the command line grub from the grub menu and do:
cat (hd0,2)/grub/grub.conf
The cat command returns a printout of the grub configuration the system is obviously using. I didn't create this file, but the titles are identical to what I see in the GRUB menu, the default boot is Windows, and the timeout is very short. This must be the file. It looks like:
default=2
timeout=5
splashimage=(hd0,2)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.9-89.ELsmp)
[Code].....
I've also tried making the RHEL5 drive the primary drive. In that case, I can modify the existing /boot/grub/grub.conf file and see my changes at the GRUB boot menu. However, I can't get Windows to boot in this configuration. I've done a lot of google searching on the topic and added map commands to make Windows think it is on the primary drive. But, I'm still unsuccessful on this front as well. I think I'm closer to solving the problem with Windows/CentOS as the primary. However, if you think I will have more success with RHEL5 as the primary drive, I can provide more details as to my current grub.conf on that drive in a later post.
View 6 Replies
View Related
Jun 28, 2010
I am trying to configure LAMP environment on ubuntu10.04 Lucid system.I am writing the output & attaching files of output of different issues. PHP is not running,I cant figure out why its not working. To add this issue I would like to inform you that nanoweb server is working{I can see the page in web browser"It Works"}.Also MySQL is working fine. To summarize Linux-->Apache/Nanoweb but no bridge between MySQL--X--> PHP. guide me for right direction,how to approach this problem as i am unable to crack this common problem.
[Code]....
View 9 Replies
View Related
Mar 20, 2010
How to configure tata photan card in my linux operating system. I am using centos.
View 3 Replies
View Related
Jul 12, 2009
How to configure RAID 1 (hardware RAID 1 or Software RAID1 ) after installation of operating system : RED HAT ENTERPRISE LINUX 5.3 SERVER
View 9 Replies
View Related
Mar 29, 2011
How can i configure an openCA and openOCSP server on a linux virtual machine?
View 1 Replies
View Related
Dec 1, 2010
When I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies
View Related
Feb 22, 2010
So 2 days ago everything was all fine on my machine. Has been for about a month, but all of a sudden as of yesterday I have no sound, I am seeing IRQ interupts on boot, During boot I am seeing file system is not clean, , and swap space is being used for the first time while doing normal task, etc. These are 2 new hard drives in RAID 1 with ReiserFS. I should have used a newer FS but thats a whole other argument.
Anyways here we go.
The system is Debian Lenny amd64
Physical RAM 4GB + 6GB swap
/var/log/messages
Code:
Feb 21 07:35:09 Sarah kernel: imklog 3.18.6, log source = /proc/kmsg started.
Feb 21 07:35:09 Sarah rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="3994" x-info="http://www.rsyslog.com"] restart
code....
View 8 Replies
View Related
Apr 9, 2011
I am getting occasional errors during the boot process.One at the beginning and one or two when I switch to single user mode.I 'd like to run the system file checker to fix any possible errors.But when I run fsck in the terminal I get the message:Code:
mansour@ubuntu-notebook:~$ fsck
fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
[code]...
View 14 Replies
View Related
Jan 6, 2011
What I want to do is to find keyword in config file and change its value - that must be done using script.
I could write script usig awk and etc - but maybe there are already prepared ways/commands to change standard configure file setting?
View 1 Replies
View Related
May 31, 2011
i want to configure vsftpd server with file zilla in ubunto environment..
View 3 Replies
View Related
Apr 12, 2010
Can anyone answer me the color code of the linux file system?
Especially, for those which have different colors in the background also like some have green background colors and are written in green some have yellow background and are written in black,why is it so?
Also please explain me the color code of other also.
View 2 Replies
View Related
Aug 26, 2010
I am looking for a way to configure rTorrent to stop downloading all torrents after they have downloaded x amount. For example, specify 15mb and as soon as the torrent reaches that size have it finish downloading the pieces it has requested and then start seeding partially completed. The reason for this is I'm trying to come up with a way to build ratio on a site where torrents are added very fast and at a very high frequency.
I download and add the torrents to rTorrent automatically via RSS, but I only want to download a small amount and seed that small piece while there are still a lot of people in the swarm (swarm drops off very quickly) and come out with a positive ratio from that small piece, beating the ratio clock so to speak. I thought it would be an interesting all be it somewhat impractical exercise in shell scripting, if rTorrent can be hooked into like that, documentation is sparse in some areas.
View 1 Replies
View Related
Jul 19, 2011
How to configure File Sharing server which will be in the same network along with Windows DNS servers and others.Googling showed me that "Samba server" will do the job of file sharing . Okay samba server is configured on Ubuntu Linux machine but how to add this to the existing domain where windows machines are ? Do i have to really add this Samba server to windows Active directory or adding it in the network will do? Please also help me in configuring samba server security and the ease of user access of the data on the server.
View 2 Replies
View Related
