I want to install a program from this website http:[url].... and i download the option " hydra-6.3-src.tar.gz".i tried following the instructions on this page: https:[url].... but when i get to the ./configure step it says "bash: ./configure: No such file or directory"
View 9 RepliesI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI have downloaded the latest gnome commander source code from the gnome commander home page. Following the instructions in the readme I have extracted it from the tar ball and changed to the top level directory of the source code. I execute ./configure and get a bunch of "checking" results.
Quote:
bash: ./configure: No such file or directory
ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9/src$ cd ..
ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9$ ./configure
[code]....
I find Makefile.am and Makefile.in present in the directory. I generally install from deb packages. Still, I don't think it should be this hard to compile a package given the seemingly simple directions provided.
i am using rhel5. can anybody tell how to configure an apache server step by step
View 1 Replies View Relatedhow to configure dsn server in redhat linux 5.4 step by step
View 1 Replies View RelatedI'd like to instruct bash to use a special method to perform completion on certain directory names. For example, bash would call a program of mine to perform completion if a path starts with "$$", and perform completion normally otherwise. Is this at all possible? How would you implement it? The goal is to allow autojump to complete paths for all commands when the user starts them with a certain prefix. So for example when copying a file from a far directory, you could type: cp $$patern + <Tab>
and autojump would complete cp /home/user/CompliCatedDireCTOry/long/path/bla/bla and you would just have to add where you want to put the file. Of course I can use ott's comment to add it to a few specific commands
I would like to modify Bash Prompt so it does not show the whole $PATH but just the current and parent directory. I am using Ubuntu.
View 3 Replies View RelatedFirst time trying this. After trying to upgrade Mozilla, I received a warning that my GTK+ library needed to be upgraded from 2.8 to 2.10 or newer.
In trying to upgrade my GTK+ library following these instructions, I got to the ./configure step but then received the warning bash: ./configure: No such file or directory.
I've got an EEE PC, running Linux (i686, I believe). I'm not sure what additional information to provide.
step by step procedure of how to install Free Adobe Flex SDK in Ubuntu 10.04.
View 1 Replies View RelatedI'm an absolute beginner trying to sue Linux. I just installed Ubuntu Linux Netbook Remix 10.04 LTS and everything's fine. I just wanted to have Java in my Ubuntu. I downloaded JDK from Sun website. There are 2 files
jdk-6u21-linux-i586.bin
jdk-6u21-linux-i586-rpm.bin
I searched the web for instructions on how to install but I just get confused. Can anyone provide me with step-by-step installation including registering environment variable ?
My son's desktop has Fedora 12 and a wireless card. Everything worked for a long time until one fine day the network management just disappeared from both System/Preferences menu and the panel on top.I can run a Live CD with Fedora 12 on that machine and it immediately connects to our home wireless network. Booting from hard drive has no sign of NM. Trying to run 'yum install NetworkManager-gnome' does nothing because there is no connection. Running the same command as a LiveUser from CD does seem to install everything (but where to???), no errors reported, and still the is no network functionality upon reboot from the hard drive, even when plugging to LAN with a cable.It seems that I need NetworkManager in order to go online in order to install NetworkManager.I have other computers at home that work fine, I was able to download a couple of archives with NM, but I am new to Linux and have no idea what to do with those files.I could not find any step-by-step installation guides for NM, especially when the computer has no connection at all.
View 8 Replies View Relatedi`m tryin` to config my kismet conf file cuz i get this message FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line i`ve googled few tutorials but cannot figure out what i should type there , i use Atheros 9285 , my wifi interface is wlan0 as u can see :
[Code]...
i know it should look like this : source=iwl3945,eth1,eth1 or source=madwifi_ag,wifi0,madwifi i`ve tried and changed for with my ath , wlan0 , but it still wont work, what i should type in those three lines after source= and what does it mean each .and if you could tell me how to determine what to type there or where does it say what to put there.
I am getting an error message at step 5 of 8 in the installation process. I am using Ubuntu LiveCD. The caption of the error is 'No root file system' and the message itself says 'No root file system is defined.Please correct this from the partitioning menu.' I enclose a screenshot of this. I had also problems with booting Ubuntu and Windows after installing Ubuntu to an external hard disk so I probably have to also create a new boot menu (may be it is differently called, 'grub' possibly, I am not really sure).
View 1 Replies View RelatedInstalled SUN JDK usnig the following command on Ubuntu[ 9.10 Karmic Koala]. It seems already there is a default version(open jdk) but i want to use SUN JDK for Android development.
when i run a simple program i get the following error
# javac HelloWorld.java
The program 'javac' can be found in the following packages:
* openjdk-6-jdk
* ecj
* gcj-4.4-jdk
[Code].....
Came from 8.04, fresh install. The monitor was not detected properly, I have 1024x768 max resolution on a 1280x1024 screen. As 10.04's xorg has no xorg.conf file, I cannot tell it the right data. What and where are the new config files?
View 5 Replies View RelatedSorry if this has been asked 1,000 times before, but how do I use another distro installs /var/cache/apt/archives on a new install so that I don't have to download everything again? I've tried various methods that haven't worked and I can't find anything to address this.
View 3 Replies View RelatedI have upgraded to 10.04 or tried to at least. I have a server at OVH and it was running 8.04 desktop and I decided to upgrade it to 10.04 little relizing that OVHs kernels didn't work with 10.04 so after the reboot phase it ended up going into a netboot rescue mode.
I have got the latest kernel from the kernal.ubuntu area and installed it. Run grub-update, reboot... Nothing. So I decided to run apt-get install just to make sure there was nothing that needed to be installed.
The following is what I have got
Code:
Now from my research this means that I don't have a bootable system.
The following is the response I got from OVHs team
Code:
I'm trying to install package kde-plasma-netbook on a Debian Squeeze, armel architecture build. It is being blocked because package 'hal' (hardware abstraction layer) will not configure. The message I'm getting is:
Errors were encountered while processing:
hal
kde-plasma-netbook
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install. Trying to recover:
Setting up hal (0.5.14-3) ...
Reloading system message bus config...Failed to open connection to "system" message bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. invoke-rc.d: initscript dbus, action "force-reload" failed. Starting Hardware abstraction layer: haldinvoke-rc.d: initscript hal, action "start" failed.
dpkg: error processing hal (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of kde-plasma-netbook: kde-plasma-netbook depends on hal; however: Package hal is not configured yet.
[Code]...
i have mozilla 3.0.8 in my ubuntu 9.04 & i cannot configure java in firefox.so when i check in the website of java that if i hav proper java installed or not they say i dont have any proper version installed.but i checked from synaptic that i have java 1.6.0 installed.so what to do??
View 2 Replies View RelatedI intergrated the CAS on Liferay, it is working fine for single service. Now my goal is to configure Proxy Authentication on CAS to authenticate set of Liferay Services. I used the following services for proxy authentication, but unable to validate it.
edu.yale.its.tp.cas.client.filter.proxyCallbackUrl
edu.yale.its.tp.cas.client.filter.authorizedProxy
How to configure Proxy Authentication in web.xml.
I am a web designer and don't know anything about servers. My server service provider use Linux environment and sometime it would be much easier for me to have a local server to test my websites. So I have install a fresh copy of Ubuntu 10.04 to one of my computer. Half way installation, the system tell me something like couldn't configure the DHCP, I have checked that my router has enabled DHCP servers (D-Link 615). After installation and logon, I use sudo pppoeconf command and try to set the network.
But it said something like no PPPoE access. I know I am very dull, and maybe get ban from this forum because I have not read the instruction, it will be great if you can point me to the right page. All I want to do is have something like a web space + MySQL and support PHP to work with.
What happens when a tar.gz/tar.bz2 has no configure file after extracting? Is there other alt. to creating a makefile? If somebody could walk me through this it would really pay off after all the google'in i"ve done.
View 5 Replies View RelatedI recently installed Ubuntu 9.04 and I'm having issues with apt-get and proxy configuration. Upon initial install I attempted to set the proxy configuration through the GUI and opted for the "manual proxy" configuration. Part way through entering the proxy server name I decided to use the "automatic proxy" configuration option instead. I checked this radio box and entered the URL to automatically configure the proxy information.
At this point everything seeemed to work fine. I ran "apt-get update" and, partway through the update process, I decided to abort the update by pressing control-c. Now I am unable to use apt-get to perform any updates. It gives me several errors stating it is unable to resolve "www" (which is the partial name of the proxy server I began to enter before deciding to use the auto configuration option).
No problem I thought...I'll just go into "/etc/apt/apt.conf" and change the name. Except the name in the apt.conf file is correct. I brought up "synaptic" and changed the network configuration there (as it had the same issue) and now synaptic works fine. I am also able to use the GUI Update Manager to update my system. Still apt-get update fails. Here is one of the error lines it spits out:
[Code]....
I'd like to try to sell my old laptop. Although it's unlikely that somebody would like to buy and even more unlikely that this person would like to have Xubuntu on it I still want to do a clean install. The only question is how should I configure the user name. I mean if a buyer would like to keep Xubuntu but change the name how it is done? What do you have when you for example buying a Dell laptop with Ubuntu pre-installed?
View 3 Replies View RelatedI am interested in running Ubuntu side-by-side with my windows 7. It appears that the Ubuntu 11.04 installer does most of the work for me as partitioning according to:[URL] but the only thing it says that I would be having to do myself is changing the code on my MBR to point to the GRUB2. I am not afraid of command prompts, but would like some hand holding as I don't wwant to guess and check when dealing with MBR.
1. Is there any way to share documents between my Ubuntu partition and Windows partition? Or some way to make it so documents and non OS specific files are accessible by both OSs?
2. Is it recommended to let Ubuntu do the partitioning for me? Or is there something to be gained by partitioning myself?
I want to install Ubuntu 11.04 along my current Windows XP installation and I am trying to figure out the following:
1. How to recognize the relationship between Windows disk drive letters and the Linux disk drive indicators like /dev/sda/
2. How to configure the multi boot?
3. Where to place the Linux swap file?
4. Which Linux filesystem is the best for general use?
The specifics:
Pair of identical Seagate SATA2 80GB drives partitioned in Windows as follows:
When looking through the Ubuntu installation to be configured, I assume that drive 0 is /dev/sda where I have 3 partitions sda1, sda5, sda3. Drive 1 would be /dev/sdb with partitions sdb1, sdb5, sdb3 and I am not sure which corresponds to the Windows drive letters.
I would like to dedicate the empty drive K: for the Linux installation, swap space & data, and use minimal amount of space of drive C: for the dual boot.
I have installed xampp1.7.3 in "/opt/" directory .
Where i have to install ffmpeg either in web root i.e 'htdoc' or any where?
How to install ffmpeg?
What are the lib has to be installed for converting any movies uploaded by user to avi and capture image from video?
How to configure with php so that ffmpeg is visible in phpinfo()?
I have a hp2100 printer that Fedora 11 recognized but won't print. I get this :
[davek@localhost ~]$ su
Password:
[root@localhost davek]# hp-setup
[code]...
Does anyone have experience install,configure zabbix on Fedora. I already install using yum but i don't know how to configure. I already install zabbix agent, zabbix server but don't know how to configure.
View 1 Replies View Related