i'm new to linux and i am running ubuntu 11.04.i'm trying to install wine. i downloaded the binary files and extracted them. i tried running the command './configure' and got a error saying :no such file or dir. i read the 'readme' file but cannot configure.
View 3 Replies
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedI downloaded the iwatch tgz file [URL]... I unzipped them and so have a directory called iwatch that contains several files, but I do not know how to install it, or even if I do not need to. But the readme refers to an iwatch.pid file, that is not there, so I am not sure what to do. Has anyone installed and used iwatch that could help me get it working, as I want to monitor a directory and be alerted of changes.
View 3 Replies View RelatedI regularly rsync directories to an external usb drive. Recently I've started getting errors which look:
blah blah:Read-only file system (30)
The external usb drive has two partitions (ext3 and fat32) and I rsync to the ext3 one. The rsync command is
rsync -ahi --delete /home/mike/some_dir /media/usb_drive
People have reported this error with faulty usb cables but everything was working fine until recently so it seem unlikely a usb cable would suddenly wear off.
When I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies View RelatedI have a computer in the university and I have root access to this pc. Iam trying to install Cblas library on it. But it gives me a starnge error /usr/local/atlas is read only file system. I tried doing mount -l and it gave me that appserver1:/export/d1/Linux/doe on /usr/local type nfs4 (ro,sec=.......) I think what it means that the main server directory is mounted to /usr/local and it is read only. So, how can I fix this problem to separate the two and make my /usr/local separate
View 13 Replies View RelatedI'm having problem copying files from my laptop (windows xp) to moxa (linux) using ftp.
The error im getting is "533 read only file system".
Tried reboot and fsck but problem remains.
mount output below:
I'm trying to install HDF5 from a tarball. I don't think it is available in the repositories. So I uncompress the tarball, read the README file, it says to do the usual ./configure, make, make install sequence, but when I do it I get: bash: ./configure: No such file or directory Ok, so it's not there. But the README says it should be. What's going on?
View 1 Replies View RelatedI bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
How can I read .gz file direct on shell/terminal without decompressing the file?
satimis
Was struggling with this for a little, no really clear answers around.Anyways, edit /etc/mstab, kill the entire line with the faulty drive.Unplug the drive/usb, restart, then do a
Code:
sudo fsck -r /dev/whatever
umount it, then remount and it should be fixed
i am having a problem concern zlib installation.i tried configure file successfully but make file displayed some errors.that usr/linux/limits.h not found.so i found that i have to install glibc-headers-devel...but there is no such a kind of package in ubuntu repository?/????/some people saying that libc6-devel is equal to them!
View 1 Replies View RelatedI want to configure file printer (print to file) on my rhel-5 machine in such a way that if users fire print command from windows xp it should create an individual computer wise txt file on my linux machine. File name should be different for each printer.
View 2 Replies View RelatedI am configuring my Apache Server to enable checking CA Revocation List, and my Configuration lists as following :
Code:
SSLCARevocationFile /etc/httpd/confi.d/ssl.crt/CRL1.crl
But the server can not start, and the log says:
Code:
Unable to configure X.509 Storage for certificate
If I try this command to view content of my CRL file :
Code:
openssl crl -text -in CRL1.crl -noout
the console shows :
Code:
error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib:647:Expecting: X509 CRL
I think there is something wrong with my CRL file, such as the file format.Is there any requirement to the CRL file? What can I do to enable this CRL file checking?
I've had this happen twice. I get this after the grub screen (after I select which mode), it hangs, then says "error: can't read from file .... press any key to continue". I press a key, and it just sits there. I've tried two installs, it booted after the second, but once I activated the broadcom driver, it did it again. So I had to re-install, again.how to prevent that from failing again?
View 5 Replies View RelatedI can't insert songs in my iPod nano.There is an error occurs which says that it is a 'read only file system' in ubuntu
View 7 Replies View RelatedI'm playing with Fedora 12 and can't get GRUB to work. To boot, I've been using GRUB4DOS. While that works fine, I'd like to figure out what's wrong with regular GRUB 0.97. After the initial installation, GRUB came up on reboot, but it was broken -- it couldn't read the config file apparently, and no commands would work correctly. So I attempted to reinstall grub via the grub prompt. No matter what I do, or which hard disk I install GRUB on, I get "Error 18". I tried using the "grub-install" command as well as the prompt, and that did the same thing.
My system here is an ASUS M4A785TD-M EVO mo/bo. I've got four hard drives. Two 1TB SATA drives and a couple of PATA drives (300 and 500GB) on a Si608 controller card. Using the BIOS "BBS" boot menu, I can boot NTLDR and BOOTMGR off active partitions on any of the drives (with proper Boot.ini modifications to handle the change in drive order). GRUB4DOS works as well, and will boot Fedora 12 correctly off any of them (with proper menu.lst ministrations). But GRUB 0.97 that comes with Fedora just refuses to do anything other than say "Error 18".
to install rssowl visit this web site , theres a link to install the repo for ubuntu[URL]..i have had rssowl running for a few days now and today my pc locked up hard i had no choice but to hit the reset button
upon restart rssowl refused to start kept giving me an error that it could not starts cos it was trying to read past end of file lucky for me i back up my rss feed list every now and then i went to $ home/.rssowl2
and delete this directory fully now when restart rssowl it start up like a new install and ask for my *.opml file it loaded up and all good again
i got some mail starting in the last days with this content:
Code:
/etc/cron.daily/logrotate:
error: bad top line in state file /var/lib/logrotate/status
error: could not read state file, will not attempt to write into it
run-parts: /etc/cron.daily/logrotate exited with return code 1
/var/lib/logrotate/status
Code:
Package: binutils-static
Auto-Installed: 1
Package: linux-restricted-modules-common
Auto-Installed: 1
[code]...
i only installed packages via aptitude and did not modify anything logrotate related.
I'm having real issues installing 10.04 to an SSD - I had one SSD fail, and have replaced it with a brand new one, but the 10.04 installer fails at beginning to write files to the disk with this error:
[Errno 30] Read-only file system: '/target/bin'.
Curiously:
* Windows XP will install to this SSD with no issues
* I can install 10.04 to a standard HDD with no errors.
What is happening that is stopping me from installing 10.04 to this drive? I am fairly sure that there is no issue with the SSD (I have two brand new, identical OCZ Vertex II 60gb drives which both encounter this error.)
I have tried partitioning the drive using gparted on another machine, leaving 5mb free at the start of the drive, and having a single partition for /, and a 1gb swap partition. "Round to cylinders" was unchecked. The partitioning was successful, and the drives can be mounted on my other machine, but the 10.04 installer encounters the same error.
I built the indexes, but when I search I get this: Top-Level Documentation Application Manuals
openSUSE Documentation (en)
Htdig error: Unable to read word database file '/home/philip/.kde4/share/apps/khelpcenter/index//opensuse-manuals_en.words.db'
[code]...
the UNIX manual pages work, the Application Manuals show nothing, and the openSUSE Documentation shows the same error. This is the same no matter what I search for.
[code]...
Failed to read mirror file. it eventually shuts down saying "reverting to original state"?
I've created quite a predicament with my desktop installation and would prefer to be able to salvage it instead of having to reformat/re-install Ubuntu.
Quite a lot happened and here's my best recollection:
- My Ubuntu installation stopped working and I could not get the desktop to load.
- I backup up my entire home directory by creating a zip file along with other small zip files. I used Alt + Del + F1 to get the CLI to do this.
- I then did different things trying to get the desktop to load.
- I did a apt-get upgrade, to try and get it to work; this was not sucessful.
- Working through several dependency issues I finally got sudo apt-get ubuntu-desktop upgrade to work, but it did not finish completely. I started to get out of memory errors. I am assuming this was because too much hard drive space was taken up by the zip files I had created
-I could not boot and do anything properly after that. Every attempt to modify the filesystem (to free up space) results in an error "Read Only File System". The root file system was not being mounted and I would see root@none on the CL
- Looking on the boot loader I now have Ubuntu 9.10 2.6.24-generic installed
- I burnt a new installation of Ubuntu 10.4 LTS
- Using Live CD I tried to see if I could free up some space and get the system back to more stable state,
However this was NOT sucessful. I tried to mount my drive by sudo mount -t ext3 <dev> <dir> but I keep getting the following error: error while loading shared libraries: /lib/libsepol.so.1: cannot read file data: Input/output error
I am trying to create my own yum repository in RHEL5 machine. for this i installed http server.
#createrepo /var/www/yum/
my /etc/yum.conf file configuration is:
[rhce1]
name=rhce1
baseurl=url
enable=1
gpgcheck=1
#yum -y install vsftpd
Repository rhce1 is listed more than once in the configuration
Setting up Install Process
Setting up repositories
http://192.168.142.135/yum/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error: Cannot open/read repomd.xml file for repository: rhce1
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
error message when I ran my program that I couldn't open my local file. I have two files first one is called client, second one is called server I am using named pipes to sent a message from client to the other file called server in client I used mknod() to create the two named pipes,one for read,one for write and created new thread in client using fork() spawned a child process that executed the server file both named pipes are opened the client file got the message from the user and sent it through the named pipes to the server file when the server receives the message , it needs to verfify it is correct in the server file, a local file descriptor is created to read and send this verifing message when it is not correct but I am getting an OPEN() error when I tried to open this shared local array buff and attach it to a file descriptor where the message is kept why do I get this error in server file
int main()
{
/*both named pipes are open*/
rfd=open(IFIO1,0);
wfd=open(IFIO2,1);
[code]....
I plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.
Code:
cat ${SOURCE}/{start,universal,index,end}.txt > ${SERVER}/index.html
cat ${SOURCE}/{start,universal,02042010,end}.txt > ${SERVER}/02042010.html
[code]....
I am splitting a file based on the values read from an input file. The below one is the script.
1)How do I add the header which is present in the original file to the new split files created?(For eg. pharmacyf conatins header as table column names. The new files created (ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat) are without the header).
2) Also the script is creating 0 byte files for the pharmacyids which are not available in the intial file? Can this be avoided?
for pharmacyf in *
do
tablename=`echo $pharmacyf |cut -f4 -d'.' `
while read pharmacyid
do
grep -w $pharmacyid $pharmacyf >> $OUT/ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat
done< inputfile
done
I am testing my ftp server configuration.Anonymous download works , however anonymous upload does not.I am getting the following error message from both Windows and Linux 5.4clients : 553 cannot create the file.And i am running Fedore 12.
View 3 Replies View Related
