I'm having problems configuring my virtual hosts file properly The site [URL]... opens on http and https The site 10.0.1.3/myapp/ works
I am trying to redirect all traffic from [URL].... to [URL].... while maintaining access to [URL]....
[Code]....
[Code]....
What I want: multiple virtual hosts with ssl and only 1 ip address: In my example: server = 192.168.227.129
[Code]....
I am trying to configure Apache to handle virtual hosts. For this I un-commented the line in httpd.conf that say
Include /etc/httpd/extra/httpd-vhosts.conf
Then I included the following in httpd-vhosts.conf:
<VirtualHost *:80>
<Directory /var/www/git.localhost/gitorious/public>
Options FollowSymLinks
AllowOverride None
Order allow, deny
Allow from All .....
I don't know if I'm posting in the right box - I'm new to both Ubuntu and this forum so please bear with me. Thing is, I spent almost 2 days trying to find a web server that meets my likes. I tried like almost every well known web server, be it Apache, Lighttpd, Nginx, and Cherokee, one by one. For each I was successfully in getting PHP up and running, but was never able to configure the virtual hosts.
I'm 99.99% sure that I - for multiple times - followed correctly the online how-to's. Especially Cherokee, I did exactly the screencast (which is just 2 steps, as Cherokee has a GUI for virtual server setups). Strange enough, with each web server the virtual hosts thing never worked for me. I always received "Server not found" error. I tried with Firefox and Google Chrome. Currently I'm on an Ubuntu 9.10 (32bit) box - I reinstalled this one over the 64bit, to vain.
Don't know if it's a problem with my DNS, but I have another machine running Windows 7 with the same DHCP settings (means same DNS and IP range). Virtual hosts work fine there on an XAMPP installation.
I'm wondering if this is even possible before I start the learning curve with Ubuntu and apache virtual hosts.
I have a static external IP address that resolves to the various domain names I will be using. I have a web server inside my network with a private IP address and any http request to the firewall is forwarded to the webserver on the appropriate port. This setup works well when using the same web page/configuration for all of the domains.
Will it be possible to use named virtual hosts in this configuration, or will the NAT'ing interfere?
I have been searching and reconfiguring for 6 days now and have lost several clumps of hair.. PROBLEM: I want 2+ virtual hosts on my ubuntu server (1 ip) BUT - Only the first "alphabetically" listed sites-enabled shows.
[Code]...
[Code]...
I can't seem to be able to save a file properly with java on the sheevaplug (ubuntu)
Here's my test-code:
Code:
try {
File f = new File("test.txt");
System.out.println(f.exists());
[Code]....
it seems to save the file, but nothing that is readable in ubuntu.
I'm using the openjdk-6-jre package by the way.
EDIT: NVM! Forgot to cd into the directory holding the jar before running, so it was working but it was saving to the $HOME dir...
I'm new to fedora and linux. I'm trying to add virtual hosts to my xampp server in /etc/hosts I added :
Code:
127.0.0.1 localhost.localdomain testsite
and in /opt/lampp/etc/extra/httpd-vhosts.conf added this:
Code:
<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
DocumentRoot /opt/lampp/htdocs/testsite
[Code]...
when I'm trying to add a virtual host with a foreign character in the domain name. The foreign character is .
I've read earlier threads where it was said I should puny code it, which then translates to xn--nda
I then created a virtual host, as shown (replaced the real domain with exampl�:
Code:
<VirtualHost *:80>
ServerAdmin me@exampl�.com
ServerName exampl�.com
[Code]....
However, apache2 doesn't recognize this when I try to enter the domain, it just shows my 000default.
What is the best way to go about setting up multiple virtual hosts on the same box, one using http and one using https/ssl? I'd like to serve them from the same ip address if possible; I know it's possible in apache 1.3.
View 2 Replies View RelatedI have Apache up and running and have a few virtual sites enabled. All these sites belong to the same user and group and the directory root for each site is in /home/{same-user}/www/{site-name}/htdocs/
I use Samba to connect from Windows to these directories and by default, files and directories are saved as the {same-user} and {same-group}. My question is, would it cause a problem if I changed the user and group in the virtual server directives in /etc/apache2/sites-available/site.conf files, giving apache permission to write to these files and directories. In the past I have changed the user and group to www-data (the default) but this seems inefficient an cumbersome compared to what I intend to do.
I use the server mostly for development, although at times I have a small site or two available to the public. Before I do this I want to be sure I'm not leaving a gaping security hole by changing these things. If this is all wrong, what is the standard way of running virtual hosts from apache and what is the standard document root for virtual sites?
I have installed bind9 for DNS. I have also installed Apache2, PHP5, MySQL, and correctly configured these together. When I view domain1.co.uk it currently works fine as required. I would like to change it to:
* /var/www/domain1.co.uk/prod/ - becomes the root dir of domain1.co.uk
* /var/www/domain2.co.uk/prod/ - becomes the root dir of domain2.co.uk
Nevertheless, I have created a the following files; these are copies of the "default" file and correctly amended. the required destination directories are in place!
* /etc/apache2/sites-available/domain1.co.uk
* /etc/apache2/sites-available/domain2.co.uk
I then executed:
Code:
sudo ln -s domain1.co.uk ../sites-enabled/domain1.co.uk
Code:
sudo ln -s domain2.co.uk ../sites-enabled/domain2.co.uk
It is important to understand domain1.co.uk and domain2.co.uk represent 2 Existing domain names I own, and both point to my server.
domain1.co.uk currently works in /var/www
Why I would like multiple domain names on the server.
I have some problem in apache2 configuration. I have two websites on same IP on LAN.i.e. 192.168.1.5
[Code]...
What should I check in a few blogs I checked they said to mention in [URL]...But in this case what should I put I have two different websites or what other thing I have missed? I do not have access to DNS so that on LAN I can point site1.abc.com and abc.com to same IP 192.168.1.5 which to me seems could resolve the issue.
i use virtual hosts to develop several web applications. These are located in my home folder under /home/user/projects/project After a fresh installation, i always get a 403 forbidden error. After googling and reading on this forum, several solutions are mentioned for this problem. But i can hardly believe putting using a chmod 755 on my home folder is a correct solution. What is the correct way of doing things in this situation?
View 5 Replies View RelatedWhen I converted to OpenSUSE 11.2, and went through YaST HTTP Server Configuration, creating my virtual hosts under the Hosts tab, YaST combinedm all int ile,"/etc/apache2/vhosts.d/ip-based_vhosts.conf".I did google and read, [URL]for further assistance.I'd like each virtual host to have its own file under vhosts.d, and wondering why YaST did not do that.The file /etc/apache2/httpd.conf laid out the file structure, and all vhosts.d/*.conf files are included.Is there a way to tell YaST to create separate files for each vhost, or does the user have to manually do it?
View 5 Replies View RelatedI just installed Ubuntu this afternoon, and it has been working perfectly until i tried to install the flash plugin. My laptop froze and i had to unplug it to restart. Since then, whenever i try to log on, an error message appears saying that Gnome Communications (? i think thats what it said) center didn't configure properly and to contact the computer administrator.
View 2 Replies View RelatedI am using a reverse proxy on Debian Lenny and using apache2.
I have a site
Code:
And a site
Code:
Two files in
Code:
Code:
But the problem is [url]and [url]are both pointing to [url] I am unable to find why.I do not want to touch apache2.conf so want to go by having a VirtualHost site1.[url]
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies View RelatedI'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
I am using CentOS 5.5 and have installed PowerDNS with MySQL backend. I have Apache and PHP installed and I'm using PowerAdmin to create the master zone.I have tried to configure the zone to resolve my domain name and I have had no success.I've googled and read tutorials and have tried suggested methods, but it's still not working.This is a new adventure for me and I would like to be able to host a site from my home for experimental purposes. I am a mature (read OLD) student enrolled in Networking and have done some units in Web Design (though I'm not very good at it).
View 7 Replies View RelatedI have a project in school that the requirement is to show the proof of concept of a high availability virtual servers. the guest operating system for the test case will be a Windows variant and a Linux variant that if the main host that hosts both of this VMs fails, both VMs will be restarted on the backup host. Simple enough with VMware vSphere and citrix xenserver with essentials with their enterprise features, But I am not allowed to use a software that one will need to pay-for or is only a trial version, i need to use an open source solutions, and i am not allowed to use virtualbox.
the school has provided me 2 server class 64bit hardware with intel-vt support, i have my laptop for management tools and to also run a virtual appliance for a iscsi target (openfiler as a vm in virtualbox in my laptop).
I have figured that i will use KVM on a ubuntu server as my hypervisor but i cant find any how-to on how to implement a high availability setup that will run a windows variant as a guest. can some one give me a step by step on how to do this.
from my research it looks like i will need DRBD and heartbeat, but i dont know how to use them and if they are applicable in my needs. I wouldn't probably use DRBD since I have a sudo SAN with my iscsi target, so i can probably use open-iscsi.
I am trying to configure DNS on my virtual meachine I got I message, will you share your knowledge what it is? and how to recover from there? ...
View 9 Replies View RelatedI'm trying to use ssh-keyscan to get some known_host file population going on, but I have a ton of hosts I want to scan, all with multiple aliases in /etc/hosts. Is there a way to use my current /etc/hosts file to do an ssh-keyscan instead of making a special list of hosts that (from what I've read) ssh-keyscan needs?
View 2 Replies View RelatedProbably an easy (which means stoopid) question...I am trying to reroute a website using my hosts file so that it matches my servers certificate file for testing without effect dns and the live site.When I went to edit my /etc/hosts file it is non-existent. I have, I am assuming in it's place, hosts.allow and hosts.deny. Can anyone explain why I do not have a hosts file?
View 1 Replies View RelatedI have installed ubuntu on Vmware.I work in Lan environment and I have 2 local linux servers in my office.I have installed nagios on ubuntu.but nagios doesnt show other hosts in office.How to do I add other hosts in the office in nagios so that I can monitor network properly?
View 1 Replies View RelatedI've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
I have an log monitoring application that is listening on port 514 to receive events only from certain hosts.In order to control this,I've tried set up iptables to define those hosts that are allowed to this application. Here is an example of the script that contain the commands:
iptables.sh -> Code: iptables -I INPUT -p tcp -s 192.168.0.10/24 --dport 514 -j ACCEPT
iptables -I INPUT -p tcp -s 192.168.0.15/24 --dport 514 -j ACCEPT
...
[code]....
I'm trying to use different MTA servers (one for each domain) on the same public IP and port (25). Here I attach a graphic of my idea, to have a Postfix server that receives all incoming mail from internet, and relays to different local servers. esquema_mta-dns.jpg How can be configured the "Relayer MTA" ?
View 8 Replies View RelatedI have been searching and reconfiguring for 6 days now and have lost several clumps of hair.. PROBLEM: I want 2+ virtual hosts on my ubuntu server (1 ip) BUT - Only the first "alphabetically" listed sites-enabled shows.
000-default
[URL]
Individually they all work (if i a2dissite for each leaving 1)
[Code]....
it seems i have tried everything that everyone else is having issues with but nothing seems to fix mine. Possibilities:
1) EC2
2) Permissions on the files - I changed everything to the apache2 user "www-data" - no dice.
3) I am a dope...lets hope its that and one of you kind people point me to my issue.
Ever since I upgraded from Ubuntu 9.10 to 10.04 beta, my local .php urls are acting funny esp at virtual hosts. Sometimes it works, but mostly it gives a blank page and at other times it asks for downloading the php file. This is really random - I keep hitting F5 and any one of the above can occur. Worst part is, its not consistent. It doesnt happen for custom scripts at localhost. Mainly WordPress and Magento. Im guessing something to do with htaccess directives. Its like as if AddHandler / SetHandler is going on and off.
Code:
$ apache2ctl -l
Compiled in modules:
core.c
mod_log_config.c
[Code]...