General :: Ssh Port 22: Connection Timed Out ( Unable To Copy File Remotly )?
Apr 3, 2010
I am trying to copy the file on remote server, but I am getting error " ssh: connect to host 172.28.21.14 port 22: Connection timed outlost connection "My two server are bastion10 and newlink, I want to copy file from newlink to bastion10 buet unable. I am able to ping, when i run " lsof -i :22 " command on link3new server I am getting
link3-new:lsof -i :22
sshd 6992 root 4u IPv6 11878 TCP *:ssh (LISTEN)
while on bation10 it is ( ESTABLISHED ) ..
View 3 Replies
ADVERTISEMENT
Mar 21, 2011
i have two PCs A and B, both are connected via LAN PC A Configuration is
IP Address 10.102.6.232
Broadcast Address 10.102.6.255
Subnet Mask 255.255.255.0
Default Route 10.102.6.2
Primary DNS 144.16.192.55
[Code]...
I am trying to connect B from A using command shh -X devendra@144.16.205.236, and facing error like ssh port 22 connection timed out.
View 13 Replies
View Related
Jul 4, 2010
I have been playing with this for awhile now and I am ready to go postal.
I just want to move some files around and potentially rsync my net book with my desktop as well as learn the software (my primary reason)
Steps Taken.
Set Static IP address to machines on LAN
Turned on Port Forwarding (22)
Added Rule to UFW allow 22/TCP
View 9 Replies
View Related
Feb 4, 2011
I've ben punding myhead on this issue. I've setup a new postifx server on rhel5. After editing the needed entries, i can't seem to send any outbound mails to yahoo or any other domains.My postconf -n is as follows:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
[code]...
View 2 Replies
View Related
May 26, 2010
I've been trying to ssh out of my home network to school computers and I keep getting:
ssh: connect to host sage.math.washington.edu port 22: Connection timed out
I've tried this on my machine (running Ubuntu 10.04) and on a windows 7 machine (using putty). I have been successful ssh'ing to this machine using either of the laptops from every other network I've tried, so I'm pretty sure it's something about my home network.
View 3 Replies
View Related
Mar 3, 2009
In a little over my head here but eager to learn. Running Fedora 10 on an IBM T41. Trying to set up a local server so that I can run PHP and test webpages locally (I'm a client-side web designer). Went through the SendDerek tutorial and everything went great until I tried to check the port with canyouseeme.org. I get "Connection timed out" every time.
- The httpd service is started via the terminal.
- Port 80 is unblocked via "Firewall Configuration."
- I set up port forwarding on my router.
What am I missing? I just want to be able to have the local computer run my PHP scripts instead of having to upload them to a remote server every time I make a change.
View 10 Replies
View Related
Jul 13, 2010
when I am run:
ssh -v "login"@"server"
I get:
OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to server ["address"] port 22.
debug1: connect to address "address" port 22: Connection timed out
ssh: connect to host "server" port 22: Connection timed out
I suppose this is because I am connecting from a public institute where there is a firewall that is blocking an outbound connection on port 22.Is there anyway I can bypass the firewall using the internet ?
View 2 Replies
View Related
Dec 13, 2010
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
View 1 Replies
View Related
May 2, 2011
I have a hard drive with a bad PCB board. It stays on when not under heavy load and it will restart if I copy too much data off it. So far I have had good luck doing folders under 500 MB in size if I copy one folder to my good hard drive, wait five minutes, copy another, etc.
If I mount the bad drive and try to copy a folder of several GBs in size it will start and then stop as the hard drive restarts. When I try to mount the drive again Linux says it can't read the superblock. I have several folders with over 30 GB of data in many different folders.
What I am looking for is a way of copying a folder in Linux such that the commands grab the whole folder in chunks with a timed break in-between.
View 3 Replies
View Related
Apr 24, 2011
PPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.
View 11 Replies
View Related
Mar 23, 2011
Linux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server
The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?
# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf
View 1 Replies
View Related
Dec 28, 2010
My remote machine did an update which required a restart, after the restart i cant see the screen with VNC, is their a way to log in remotely?
I've heard that the login file can be configured to auto login to circumvent this problem, i've got the file /etc/logins.??? but what do i need to change to make logins automatic?
View 4 Replies
View Related
Jun 23, 2010
I have a problem sending emails in the command line. I have introduced this command:
sendEmail -f my.account@gmail.com -t myself@domain.tld
-u this is the test tile -m "this is a test message"
-s smtp.gmail.com
-o tls=yes
-xu usernameonly -xp mypasswd
But then I received this message:
sendEmail[13230]: ERROR => Connection attempt to smtp.gmail.com:25 failed: IO::Socket::INET: connect: Connection timed out
View 1 Replies
View Related
Feb 13, 2011
I am not able to connect to remote server through secureCRT . my local team has said that server is working fine . but I am not able to connect it remotely . what more i can do to connect it to server
View 10 Replies
View Related
Feb 17, 2011
I have standalone Suse 10 SP3 that when I run
Code: # hostname webserver but when I run host command
Code: # host webserver;; connection timed out; no servers could be reached I would like to get the IP when I issue
[Code]....
View 3 Replies
View Related
Jul 18, 2011
I'm a Red Hat 6 newbie but have been around Unix.I looked at some threads here regarding this issue and haven't been able to find a solution.I'm executing;
lpadmin -p bam -v socket:139.64.101.21 -m /etc/cups/ppd/BR5370_2_GPL.ppd
When I look in /var/log/cups/error_log, here's what I get:
E [18/Jul/2011:14:37:36 -0700] [cups-driverd] Bad PPD name "/etc/cups/ppd/BR5370_2_GPL.ppd"!
E [18/Jul/2011:14:37:36 -0700] copy_model: empty PPD file!
[code]...
View 5 Replies
View Related
May 6, 2010
Unable to mount NFS server on the client.
Getting the following error.
mount: RPC: Remote system error - Connection timed out
View 3 Replies
View Related
Mar 1, 2010
I have got a laptop running Debian squeeze. I wish to share the wireless connection of the laptop (wlan0) to the ethernet port of the laptop, so that I can share the wireless connection to my desktop PC which is connected to the ethernet port.
[My desktop PC]---Ethernet---[My laptop]---))) WiFi )))---[Public network/ ISP]
I have read the article on Ubuntu community: [url]
I followed the steps, and the /etc/network/interfaces file on my laptop is:
Now the situation is: My laptop can connect to Internet (i.e. ping debian.org from laptop is fine), my desktop PC can connect to my laptop (i.e. ping 192.168.1.1 from desktop PC is fine). However, the desktop PC cannot reach the Internet.
I also read the information on Debian Wiki: [url]
It seems I must install and configure ebtables before sharing my wireless connection to ethernet port. Is it true? (But why the article on Ubuntu community doesn't mention it?) Or I just made some mistakes?
View 1 Replies
View Related
Nov 4, 2010
I have SSH running on port 8662 and 22. I use 8662 for the outside world (eth0 which is 192.168 network) Here are the only lines I have changed in sshd_config:
Port 22
Port 8662
#Protocol 2,1
[code]....
BTW, ports forwarded on my firewall, checked and triple checked it.
View 5 Replies
View Related
Feb 11, 2009
I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies
View Related
Mar 1, 2011
How to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).
More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.
View 1 Replies
View Related
Mar 8, 2010
I am building 1 system includes 1 firewall server using iptables 1 Webserver && 1 FTP server. On FTP server IP: 192.168.1.2 - GW: 192.168.1.1, I installed ProFTPD successfully. In LAN I do everything successful.
On Firewall server <IP PUBLIC> on eth0 && IP LAN eth1: 192.168.1.1
Iptables rules:
Code: # Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*nat
:PREROUTING ACCEPT [950:126970]
:POSTROUTING ACCEPT [89:5880]
:OUTPUT ACCEPT [19:1342]
-A PREROUTING -d <IP PUBLIC> -i eth0 -p tcp -m tcp --dport 21 -j DNAT --to-destination 192.168.1.2:21
-A POSTROUTING -s 192.168.1.2 -o eth0 -j SNAT --to-source <IP PUBLIC>
COMMIT
# Completed on Sun Mar 7 21:01:16 2010
# Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*filter
:INPUT DROP [1599:157409]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [232:34452]
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A FORWARD -i eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o eth1 -j ACCEPT
COMMIT
# Completed on Sun Mar 7 21:01:16 2010 In FTP server i access to internet good.
I check port 21 on IP PUBLIC , it's return Open.
But when I using ftp command then it's show Code: Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
Aborting any active data connections...
ftp> bye
C:Documents and SettingsLONGVNIT>ftp <IP PUBLIC>
Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp>
View 5 Replies
View Related
Jul 4, 2011
when I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
View 3 Replies
View Related
Feb 4, 2011
I am not so experienced with networking in Linux. I've successfully installed Red Hat Linux Enterprise 5.2 on a VMware host. When I issued nslookup command, it returns "connection timed out" error as follows:
Code:
[root@rac1 ~]# time nslookup rac1
;; connection timed out; no servers could be reached
real 0m15.038s
user 0m0.000s
sys 0m0.000s
My questions are:
(1) Is that error normal?
(2) Is there a way to decrease the 15.038s value? rac1 is the local hostname, so why it takes all that time to resolve it.
Following info may help:
Code:
[root@rac1 ~]# hostname
rac1.mydomain.com
[root@rac1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#eth0 - PUBLIC
192.0.2.100 rac1.mydomain.com rac1
[root@rac1 ~]# ping -c 4 rac1
PING rac1.mydomain.com (192.0.2.100) 56(84) bytes of data.
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=1 ttl=64 time=0.015 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=3 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=4 ttl=64 time=0.029 ms
--- rac1.mydomain.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.015/0.025/0.029/0.007 ms
View 9 Replies
View Related
Apr 29, 2011
I can't fetchmail form my company server to local PC. It gives error
fetchmail: WARNING: Running as root is discouraged.
fetchmail: starting fetchmail 6.3.6 daemon
fetchmail: connection to 202.137.236.11op3 [202.137.236.11/110] failed: Connection timed out.
fetchmail: POP3 connection to 202.137.236.11 failed: Connection timed out
fetchmail: Query status=2 (SOCKET)
fetchmail: connection to gmail.comop3 [74.125.236.56/110] failed: Connection timed out.
I am trying to connect but it can't.
View 14 Replies
View Related
Apr 18, 2011
I ma facing mount problem with error connection timed out between linux and solaris machine.
when i run mount command
root@rose> mount 10.142.201.104:/view/itb_configuration_712/vobs/ims_it /view/itb_configuration_712/vobs/ims_it/
[code]...
View 3 Replies
View Related
Jul 13, 2010
I am relatively new to Ubuntu. Currently running Lucid Lynx, but I cannot connect to the internet. I can ping 127.0.0.1, and google.com. Software update works as well, but the connection times out when I try connecting to a web site e.g. bbc.uk.
View 4 Replies
View Related
Jul 14, 2011
In our development box we are configured postgresql to work with Jboss. The thing is we have firewall iptables in our linux box. when the iptables is stopped we can connect the postgres db locally using -h option, also we can connect thru a weblink we have created using Jboss. But when the iptables is started we can't connect the db locally using the -h option and the web is giving the below error. Caused by:
org.postgresql.util.PSQLException: Connection refused. Check that the hostname and port are correct and that the postmaster is accepting TCP/IP connections.
at org.postgresql.core.v3.ConnectionFactoryImpl.openC
[code]....
View 1 Replies
View Related
Jan 5, 2010
I am having alot of trouble setting up evolution to work with gmail. I am using pop for recieving mail and it's slow but still works. When I try to send mail with smtp.gmail.com I get the error message that the connection timed out. How can I set this up to send and recieve email?
View 6 Replies
View Related
Mar 28, 2011
I have 2 different networks :the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping [url]..... on the gateway machine, it works, while it doesn't work on the private network. Note: I am using VmWare 7, CentOS 5.
I could say that the problem in DNS:because when I use this command in the private network machine: [url]...., it says connection timed out; no servers could be reached ,while in the public one, it works properly.....
View 1 Replies
View Related
