Slackware :: Black Screen After StartX - Keyboard Not Responding
Mar 24, 2010
I put Slackware 13 and the scenarios is:
1. I start the computer and after startx I got black screen, the keyboard is not responding the led of the display is yellow etc. Now I reset the computer,
2. Booting Windoze
3. Choose Restart not Shutdown from Windoze
4. Booting Slack
5. startx works fine, the X server is starting and working great.
I have Radeon 9500. I configured X server with 3D accel over 2500 FPS on glxgears. The same problem persists even with X server VESA configured.
View 7 Replies
ADVERTISEMENT
Apr 28, 2011
I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen
View 13 Replies
View Related
Jan 26, 2010
I have just installed slackware. I have done
Code:
Xorg -configure
And chosen kde for init program while installing slackware. But when I type
Code:
Xorg -config -retro
or
Code:
startx
I get black screen with blinking button on monitor and keyboard. Obviously KDE doesn't start.
View 14 Replies
View Related
Oct 19, 2010
I installed backtrack4 (ubuntu based) few hours ago and i am facing a problem in getting into the graphical mode(live cd)!, hence I tried to check and run it in a "safe graphical mode" and unexpectedly it works fine! but when I switch to 1024x768 resolution in the same live cd ,and then when I type startx it just produces a black screen! After doing some research on finding a soultion to this problem I found out that this go to do some thing with editing the xorg.conf file! but when I type xorgconfig,it shows an error saying command not found!
sudo dpkg-reconfigure xserver-xorg command just talks about the keyboard!
nothing interesting on graphics or screen section!
resource: intel corporation 828456/gl 128 mb
How to modify the xorgconfig file.
View 14 Replies
View Related
Jun 1, 2010
I left slackware 13 with airodumb and airplay executed in console for 6 hours. When I got back, konsole had something similar to "packet has length error". I could open the packet using aircrack -m option, but when i shut down the OS, it didnt shut down properly. Now when I do startx black window stays forever. I tried pkgtool and change to KDE but the same happens.
View 4 Replies
View Related
Jun 23, 2011
ive used ubuntu and fedora before, but i asked around for the "best" linux distro and they told me slackware or archlinux so i desided to pick slackware ive installed it and when im in the console mode its the swedish keyboard settings, that i choose in the install but when i go into visual mode startx i dont have the swedish keyboard so i was wondering if eny of you know how to change it
View 3 Replies
View Related
Dec 21, 2015
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
View 10 Replies
View Related
Dec 25, 2010
I'm having a pretty serious problem, whenever I try to boot into Ubuntu the screen goes black, I see a flash of purple or violet and then i get a prompt asking for my login credentials, afterwards I'm stuck with a terminal trying to start the gui... I don't know what I'm doing wrong, fresh install tried to reboot after getting the display driversinstalled idk if that could be a problem. I tried to commands in the terminal already:
startx
sudo service gdm start
return = start: Job is already running: gdm
View 1 Replies
View Related
Jan 5, 2011
afeter installing ubuntu studio 10.10 a black login screen after login it asking me to type a command i've typed '' startx '' but it does't work
View 2 Replies
View Related
Jan 10, 2010
I'm running debian (AMD64 dist), and I recently upgraded via aptitude to KDE 4.3.4.After the upgrade I found that I could no longer start X (using startx from my user account).I am, however, able to launch kdm from a root command line and log in as a user to X this way (graphically).I want to run startx as a user and I cannot figure out where the hangup is. I've looked in my Xorg.0.log files comparing .old to current and nothing stands out. After I launch 'startx' the screen goes black and the computer waits. I can hit ctrl-alt-f2 and bring back the text-mode terminal screen; it's at a point where it looks like X is working. From there, I can control-c it and get back to the command prompt.
I'm thinking this is a software configuration thing but I don't know enough about how all the systems tie together to figure out where the problem is.
View 5 Replies
View Related
Oct 10, 2010
I've installed SalixOS LXDE and thought it was the best thing but... After I disabled almost all services except syslog, dbus, and hald while inside lxde desktop. I rebooted and my mouse and keyboard no longer worked. So then I booted my Slackware install and edited /etc/inittab on the salix partition so I could boot into init 3 (I kinda like init 3 more than 4 anyway). Booted back into salix and keyboard seems to work but gpm doesn't... Gpm can't find any mouse so I do an lsmod and there's only about 4 modules loaded? Crap... So I dig around /etc/rc.d folder and I think it's got to do with me disabling the udev services when everything was fine after a fresh install...
I ran the init script for udev but it does nothing... I also ran pkgtool and went to setup, selected services and hit enter but it jumps back to the main menu?! I don't know if that's a glitch or what but it won't even let me pick the services with pkgtool... So what can I do to change everything back to their default value? I only booted once into my new salix install, changed services, rebooted, and then problems... I really loved the way everything was working on my first boot. Salix is one of those distro's that really gave me a happy feeling with linux so I'd really hate to stop using it over this one wrong thing I did...
View 3 Replies
View Related
May 25, 2010
Redhat Ent Linux ES Release 2 (Taroon 8)
Kernel 2.4.21-4.ELsmp
startx(1): initialize X session - Linux man page
I thought I'd look into methods of recovering from a lost password for future use, how to change the passwd and shadow should I need to. So I started an X session, vi'd my .swp files then logged off. Perhaps I changed one of these files accidentally, but my intent was just to view them which I did. After starting up my computer the next day and logging in I began an X session - "startx". The session appears to have started, but with a black screen and an active mouse cursor.
View 2 Replies
View Related
Jun 1, 2010
I upgraded to 13.1 from 13.0 a few days ago. I have a Toshiba Satellite L3655D that I leave on constantly. Twice now, I have woken up to windows (urxvt and firefox) that don't accept keyboard input. I can paste into them and they respond, clicking is fine, but the keyboard either barely sends or is completely ignored - if I tap a bunch of keys, one or two might go through, eventually. New windows work fine, so I have to replace everything I have open.
edit:I switched to XFCE for 2 days and the issue didn't appear, but my other laptop with the same fluxbox settings also did not have any problems. I switched the original laptop back to fluxbox (and happened to upgrade the ATI drivers around the same time) and haven't had it happen since. If this happens to you, try restarting X.
View 7 Replies
View Related
Jul 11, 2011
I am learning linux commands. I just wanted to see what happens when I type
Code:
The screen became blank. Keyboard was not responding. I couldn't do a proper shutdown. I switched off computer by pulling out the plug. When I restarted, I heard a series of beeps (approximately 10 beeps). Then I was dropped to the grub prompt. The problem now is I can not type anything into the grub prompt, because the character 'c' is continously printed across the screen like this:
Code:
I couldn't stop the character 'c' from printing (I tried pressing Esc, Ctrl+C)
The solution is easy. I can reinstall grub from a livecd. Or even reinstalling the entire operating system wouldn't take more than 30 minutes. But I want to know:
1) What exactly happened to grub? What stage does this error belong to (1, 1.5 or 2)? What is the error number?
2) How can running "sudo kill -9 -1" affect grub?
View 5 Replies
View Related
Jan 13, 2010
So I'm in need of VM'ing a couple OS's to keep from repartitioning and dual booting my desktop. The first I'm trying to boot is a 64bit version of windows (have XP and 7 disc, trying XP for now) as I need to convert some of my work's ancient programs that still use DOS functions.
I choose Virtualbox over VMware just for the sake of VB being in the repos. Install and initial config went fine, but when I try to start (run) the VM the screen goes black, then the computer completely stops responding and needs a hard reboot. Pasting what I believe to be the error part in the log. If you need the entire log I can email or host it - too big for a post. Kernel Version - 2.6.32-trunk-amd64. Debian Sid
Short Version:
Code:
View 14 Replies
View Related
Jan 14, 2010
Having slackware 13 after executing startx it gives me white screen. Heres log:
Code:
kephald starting up
XRANDR error base: 159
RRInput mask is set!!
RandRScreen::loadSettings - adding mode: 59 1024 x 768
RandRScreen::loadSettings - adding mode: 60 800 x 600
RandRScreen::loadSettings - adding mode: 61 640 x 480
RandRScreen::loadSettings - adding crtc: 57
RandRScreen::loadSettings - adding output: 58
Setting CRTC 57 on output "VGA" (previous 0 )
CRTC outputs: (58)
Output name: "VGA" .....
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
"akonadiserver" crashed too often and will not be restarted!
No battery found.
This is not a laptop, quitting ...
<unknown program name>(26219)/: Communication problem with "korgac" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "
QProcess: Destroyed while process is still running.
Graphic card is intel 82865g
Video driver installed is 2.9.0 from robby workman,
Kernel is 2.6.32.3 generic
View 9 Replies
View Related
Jan 27, 2010
I recently installed Slackware 13. But every time I run startx I get my XFCE screen & it hangs up. Command line works absolutely fine.
View 6 Replies
View Related
Jul 15, 2011
My ubuntu session will freeze and stop working. For example, the mouse and the keyboard will stop responding and the screen sometimes get divided into 4 smaller quadrants of the current screen.The only thing I can do after it freezes is reboot the machine.Would anyone know what is causing this?Also, I keep having to move my optical mouse from the usb slot into a ps/2 slot.And the same thing with my keyboard. I have 2 keyboards, so I can plug in the old ps/2 keyboard instead of the new usb keyboard. (the devices keep flipping)My machine is an AMD 3400 with an Epox mobo. Nothing like this has ever happened before, and I have been using ubuntu for more than 4 years without any problems.
View 9 Replies
View Related
Jul 9, 2010
When trying to "startx" the machine goes to a black screen and just sits there. Only a hard reboot allows me to stop it. After SSHing into the machine and typing "startx"
[Code]...
View 9 Replies
View Related
Feb 21, 2010
Few days after installing Ubunto 9.10, during installation of gstreamer, the installation utility got stuck, and with it the whole desktop icons. (I think the gstreamer has nothing to do with it). When I tried to execute some icon, like the terminal, it will not open. After restarting the computer, I get a tty1 login terminal and not the graphical one (tty7). When pressing Ctrl+Alt+F7, nothing happens. It switches to a black screen. "sudo startx", gives some error log. I already reinstalled the X-server, ubuntu desktop and other stuff.
What can be the problem? Is it related to my video card (nvidia 7600 GT)? I didn't install any nvidia specific driver. This happened to me earlier and I reinstalled Ubunto. I think maybe I should move to some other distribution.
View 1 Replies
View Related
Nov 10, 2009
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
View 8 Replies
View Related
Feb 27, 2010
I just went out and bought a 19" flat screen LCD monitor. Plugged it in and it is not working correctly. When I start the computer the bios info will show up on the screen, then it goes to the screen that let's you choose an O/S if you were to dual boot. After clicking "enter" it will show the first line of the boot then it goes off into horizontal colors then goes black. I have search many different posts and googled but nothing is giving me a hint at this.I changed the xorg.conf to match the refresh rates to match the monitor but that did not work, and did not really think it would considering the point this monitor goes out on me. running: 2.6.27.7-smp 01:00.0 VGA compatible controller:
Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter
View 2 Replies
View Related
Oct 11, 2010
I have been using ubuntu 10.04 64 bits for about 3 month. Today I change my keyboard layout, so I want to test if everything is ok so I reboot my computer. When I try to reboot everything is as usual but the problem is that after grub. Nothing only a black screen no matter what i do. I doubt the keyboard layout change something but who knows. I run AMD phenom 940 X 4, 4 gig ram, Ati radeon HD 4870.
View 3 Replies
View Related
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
View Related
Jan 7, 2010
After updating my Slackware-Current (there was kernel and glibc package updates), I just get a black screen with a blinking "_" in the top-left corner when I logout.
I checked /var/log/kdm.log and found these errors:
Code:
I've found a workaround: uncommenting "TerminateServer=true" in kdmrc.
View 14 Replies
View Related
Jul 16, 2011
I'm running Slackware 13.37 64bit on an HP 2945 Laptop. KDE 4.5.5. I have a NVIDIA driver installed (270.41.06) and running KDE at 1200 x 800. I've upgraded to 13.37 about 2 months ago. I started noticing an issue with the windows in KDE pretty much upon start up. If I have multiple windows open and try to maximize a window or drag a corner of the window to a large size, the screen within the windows goes black. Also any menu in the windows goes black. If I resize back down the issue goes away. Or as stated before, if I have only one window open the problem doesn't exist.
View 2 Replies
View Related
Jul 19, 2011
HP laptop with Intel graphicsunning Slackware current with a 2.6.38.7-smp kernel.Booting with the "nomodeset" kernel parm works but X gets stuck with a 1024x768 resolution. When booting without, the screen goes black after a few pages scroll by, just at the point where the console switches to a higher resolution. Changing to a different console didn't help, so I blindly log on and type startx, and the screen comes back to life with KDE running at the higher 1366x768 resolution, I try a few apps, the webcam, suspend to RAM, resume, and everything is now working flawlessly so it doesn't look like an X issue.At this point I can change to another console (or exit KDE altogether) and the screen is back on at the higher resolution. Looking at the X log and some dmesg output makes it seem that starting X possibly replaces, reloads or unloads a driver? If this is the case, how can I prevent the conflicting driver from loading in the first place?Quote:
dmesg |grep drm
[ 11.481967] [drm] Initialized drm 1.1.0 20060810
[ 11.637941] [drm] MTRR allocation failed. Graphics performance may suffer.
[code]...
View 4 Replies
View Related
May 3, 2011
I'm trying to run Slackware 13.37 64-bit in a VirtualBox virtual machine. My VirtualBox version is 3.2.12. I had to disable compositing to keep the X-Server from reporting a segfault.Now the problem is that on logout from KDE I get a completely black screen. I can switch to a console session and type commands to get the login screen again.
telinit 3
telinit 4
I tried editing "kdmrc" to add the line "TerminateServer=true" but it had no effect on the problem.I had this working with Slackware 13.1 at one time, but I can't seem to get it working properly now even without desktop effects.I'm trying to avoid changing my VirtualBox software since each version seems to just introduce new and different bugs. The 4.X versions are not yet very stable.
View 1 Replies
View Related
May 25, 2011
i just installed slackware 13.37 which worked fine but when i boot it up it runs a number of lines and then the screen just goes black... i can login as root blindly and start x (i THINK, judging from hdd led)... but screen stays black... its a laptop and closing/opening the lid doesnt work either...
i am dualbooting with slack 13.1 which runs fine... it switches screen res at some point during boot (font is smaller) and i would say that is the point where the screen goes black in 13.37...
View 14 Replies
View Related
Jul 28, 2011
I am new to slackware, but not new to linux. I recently installed slackware 13.37, and am enjoying it very much so far. The most annoying problem I currently have is that, after starting X, I cannot switch to a virtual terminal or even end X without having a problem. For instance, from the GUI if I hit ctrl-alt-F1, instead of going to the 1st virtual terminal, the screen fades quickly to black and does not return. I have not been able to make any progress on this problem, so any input would be greatly appreciated.The only thing worth noting really is that I'm using Fluxbox as my default window manager. Other than that I haven't done a lot of modifications to the base system other than installing some basic packages, but I had this problem since booting directly after installation of the os.
View 14 Replies
View Related
