Ubuntu :: Video Card Driver And Black Dos Like Screen?
Jan 29, 2011
I am making a switch over to Ubuntu from windows on one of my kids machines.It has a Nvidia video card, a g-force fx 440 i believe, or something like that.Anyway I just loaded up Ubuntu 10.10 and and it seems it does not recognize my video card. If i go tosystem>administration>Additional drivers, the dialog comes back with "No proprietary drivers are used on this system. Ok so now I go to Ubuntu Software center and search nvidia..... I get the option to installl Nvidia binary x.org driver (version 185), I do so
Now in the Additional drivers dialogue it tells me "this driver is active and currently in use". Awsome, Now when I click on Nvidia X Server settings under system>Administration I get the following dialogue."You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."If i do what that last message said, run sudo nvidia-xconfig in the terminal, It gives an error saying the xconfig file is not there, and it will create one. The next time I reboot Ubunut just shows a black dos like screen asking for username and password. If i put it in, it does nothing, I end up having to re-install ubuntu.
View 6 Replies
ADVERTISEMENT
Jan 4, 2011
I recently swapped a hard drive from another computer I was using.The previous computer had nVidia video card (i think it was 9500? something like that), and the new computer has an ATI Radeon 4200 HD video card. Now, when I boot it up on my new comp using the same hard drive, I get a black screen and my monitor just switches from digital, analog, hdmi. I'm guessing that the video card drivers are still installed, but I cannot switch back the hard drive since my other comp is far away from where I live. If I boot up with ubuntu CD however, it loads fine.
I have many important files on the previous install though, and I'm not sure how to get to it. I wouldnt mind reinstalling ubuntu as long as I can get those files back.
View 7 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Aug 20, 2011
My EVGA 7600GT video card suddenly died. A friend gave me an EVGA GeForce 8400GS to replace. I'm running a homemade AMD Athlon 64 3700 box with 2 GB memory and 2- 250 GB WD hard drives. First drive has Win XP OS and second drive runs Ubuntu 10.04. I was using Ubuntu about 99% of the time before the video failed. After installing new vid card, I deleted old driver in Win and installed new driver off the CD that came with the card. Windows system was then 100% back to normal.
My grub booter is set up to default boot to Ubuntu with Windows the last choice which can be done manually. After installing new Win video driver and confirming it worked, I re-booted the computer and let it go to Ubuntu. The results was the usually flashing cursor for about 10 seconds, but instead of the Ubuntu splash screen popping up, the monitor went black for about a minute and then shut off the same as if I had shut down the computer.
That was over a week ago, Since then I have tried everything I can think of but nothing changes. I have read and tried numerous ideas from other posts on these forums (such as hitting ctrl, alt, +/- to change screen resolution) but I still have a black screen.
I tried booting up from my original install CD which is ver 9.10, not 10.04 (I upgraded to 10.04 by directly downloading online and never made a 10.04 CD). I can get into an Ubuntu desktop with that old CD and I checked to see that it showed the highest resolution for my monitor (a 22" wide flatscreen whose native resolution is high-1920x1280?? don't exactly remember at the moment). I also tried loading the generic Nvidia 185 driver but it didn't seem to take. I downloaded the latest Nvidia driver for Linux onto a thumb drive and tried to install it here, but was refused because the message said it had to go into "root" and I didn't have permission. I don't know how to establish permission when booting from an old install CD. I'm sure I have administration rights under my regular 10.04 installation but can't see it due to the blank screen.
I've tried at boot to go to the recovery mode listed right below the default Ubuntu boot option, but when I do, a whole series of text flashes on the screen and rolls down to the word "done" with a flashing cursor at the very end, The cursor flashes for about 5 seconds and then the screen goes black. I've tried to enter some quick text at the cursor to keep it from going black, but it doesn't stop it. It wants to go black and it does so.
View 9 Replies
View Related
Nov 16, 2009
I'm install CentoS 5.3 but I've not a GUI... when I swith , screen is black... maybe problem in Video Card... I'm download this driver, but I don't know how to install ... Driver is NVIDIA-Linux-x86-190.42-pkg1.run - how CentoS 5.3 work in 256 mb card...
View 1 Replies
View Related
Sep 2, 2010
My Machine: Lenovo T400 laptop, 9.04 ubuntu
My problem: while working on my laptop the system Offered an update to my ATI video card............so being the nube that I am I said go ahead and install it............yep that f'd it up. it ran for a while then froze up to the point I had to hard boot the machine. on restart the desktop splash/load screen displays but nothing else afterwards. I can get into restore mode and even terminal but can't seem to find anything........there is an autofix video option but that did not work either.
I spent a week loading and configuring this thing and do not want to start back from scratch...........I have too much stuff to lose on a new install. funny thing is that I just had set the system to do a complete backup of the ubuntu instance for tonight so I would have some way to restore this if something happened...........well it happend before the backup ran tonight........go figure.
Is there a way to reload the default system without loosing my files and such? I would just have to load vmware back on and some other programs but I a okay with that.
View 6 Replies
View Related
Mar 25, 2010
After having a lot of trouble with vista and no chance of getting Windows 7 anytime soon, I decided to get Ubuntu and use dual booting with vista. I had recently installed it about two days ago and for the most part it worked pretty well. That is until I installed the driver for my video card, an ATI Radeon HD2600 pro, then things went down hill for me. Every time I try and boot Ubuntu it now goes to a black screen after the logo comes up and i am unable to do anything. I have tried to look up some solutions, but I am still relatively new to programing and some of this stuff seems a bit complicated for me. Is there a simple solution to this that does not require a reinstall?
View 9 Replies
View Related
Jul 28, 2010
I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
View 9 Replies
View Related
Sep 17, 2010
i installed Fedora 12 on an external hard drive. Everything went fine with the installation and it was working perfectly until i tried to install my video card drivers. I have done this many times before and it has worked. I have an ATI card. Anyway after installing the driver i rebooted and now when it starts it show the loading bar on the bottom but then nothing happens its just a black screen!. The worst part is that when i go into windows and my external is plugged in windows wont read it and i have very valuable data on it. I go into disk management and it shows up but windows says that its empty. which is obviously not true because Fedora starts to boot. I really just want Fedora off my external and for windows to read my external with all the files still on it. Is there a way to get by that blank screen?
View 2 Replies
View Related
Jul 15, 2010
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
View 8 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Feb 27, 2010
i have a problem with video.when i make full size video from browser or from video player i see only black screen.can anybody help me pls?
View 8 Replies
View Related
Jul 20, 2010
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
View 9 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Jun 25, 2011
after initing PulseAudio, again only black sreens. I booted from an USB stick, tried mounting both filesystems, worked fine. I renamed my xorg.conf and booted from the first array. Worked with minimal video (low resolution, one screen only). Tried ATI control panel, claimed no driver active. I downloaded and installed a newer version of the proprietary ATI driver. Rebooted, got 3 screens at the right resolution. Problem seemed to be solved, all I had to do was configure ATI control panel to use 3 screens as one desktop.
Started ATI control panel, after clicking on the right section (nothing saved yet), CPU usage spiked, mouse froze. Crap. Rebooted, gnome froze before even showing desktop or populating top and bottom panels. Just black screens with empty panels top and bottom. Booted the USB. Ran fsck on both filesystems. No errors. Fear of not being to able to perform any work today ensued. Logged into ubuntuforums and explained the situation.
View 5 Replies
View Related
Mar 26, 2010
I`ve got problem with zoneminder and dvr card.I`ve got black screen when I`m using video for linux 2 or white screen when I`m using video for linux 1. My zoneminder logs
6.03.2010 13:31:44.079779 zmdc[3765].INF ['zmc -d /dev/video0' starting at 10/03/26 13:31:44, pid$
26.03.2010 13:31:44.108492 zmdc[3765].INF ['zmc -d /dev/video0' crashed, signal 6]
[code]....
View 1 Replies
View Related
Oct 29, 2010
I am having great difficulty viewing a series of educational videos (MMS streams) in Ubuntu 10.04, which view perfectly in Windows XP. All I get is a black screen. No matter whether I use Firefox or Chrome or Opera, No matter whether with MPlayer, Totem or VLC.
I have tried everything I could find by googling (basically trying different media players and plugins) but nothing works. This is my final attempt! Anyone have any ideas, or similar problems?
View 9 Replies
View Related
Jan 28, 2010
I have geforce fx 5200 and i downloaded the 32 bit and 62 bit for the video card driver update and i dont know how to use them and they and they come in scripts !
View 3 Replies
View Related
Jan 25, 2010
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies
View Related
Apr 19, 2010
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies
View Related
Nov 27, 2010
just installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.
Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.
View 2 Replies
View Related
Nov 29, 2010
I've been using ubuntu fine for a while when I decide to activate my nvidia graphics card.After rebooting, however, I hit nothing but a black screen. I've searched the nets and others have seemed to solve the problem after hitting alt+ctrl+f1/f2 and editing some files after that, but that doesn't work for me. Booting into recover console gives me nothing but a long stream of white words before it runs to --> done. and then it goes back to a black screen. Running from Live CD I can't access my ubuntu files.
View 3 Replies
View Related
Mar 30, 2011
I'm running Ubuntu 10.10 on what used to be a windows vista. I bought me a new graphics card today so that I could run dual screen (GeForce210). I saw a guide at [URL] and I followed it.
I typed: sudo apt-get install nvidia-current
then I restarted my computer, once again as instructed I typed:
sudo nvidia-xconfig then logged out as instructed...
After I logged out the screen went black and I was not able to login. So I restarted my computer. Now when I turn on my computer I am getting this error and it's stopping at it.
fsck from util-linux-n/g 2.17.2
/dev/sda1: clean, 255658/294092280 files, 5031534/117616640 blocks
*starting apparmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*setting sensors limits
Starting GNUstep distributed object mapper: start-stop-daemon: unable to stat /usr/bin/gdomap/ (no such file or directory)
speech-dispatcher disabled: edit /etc/default/speech-dispatcher
*starting the winbind daemon winbind
It stops on this screen. I do not want to wipe it but I cannot get it started. I do have an external hard drive and at the moment I am using my Ubuntu disc to "try Ubuntu" I was going to try backing up everything I have but it will not let me access root because I am not logged on to that user, is there anything I can do to get pass this? I've called around and no one is willing to work on my computer since it is now running on Ubuntu 10.10
View 7 Replies
View Related
Dec 21, 2010
I installed Skype 2.1.0.81 using Software manager on Ubuntu 10.10. Everything is working fine with exception of incoming video. All incoming video is displayed as a black screen. From Google I learned that this is a typical issue with Skype on Ubuntu. I tried the instructions but none of them are working for me.
View 1 Replies
View Related
Mar 24, 2010
I'm having some trouble on the search for the correct driver to my video card, an Intel Chipset. In the HP site, I can only find the driver in the windows format, and I can't find any other proper linux file on the Intel or Nvidia webpages, althougth I know they provide it. how to download the correct file?
The properties from my video card and the webpages I said are below.
Code:
HP Drivers: http://h10025.www1.hp.com/ewfrf/wc/s...roduct=3979340
My computer is a Hp Pavillion Dv4-1465dx.
View 11 Replies
View Related
Feb 8, 2009
I am running Fedora 10 on a Gateway Machine. I tried to install the corresponding drivers for acceleration but it seems to have broken the display. After the loading splash screen, the screen goes black and does not respond to anything. I did manage to see the Grub boot loader by pressing 3 a number of times while booting the machine. Any ideas for how to revert the computer to its normal display so i can try again at getting these drivers working. It is a tad bit annoying not having a display but hell, this distro is already as far as I can see 10x as good as Ubuntu.
View 13 Replies
View Related
Apr 13, 2010
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies
View Related
Jan 22, 2011
I've recently had a new Video Card installed in my Ubuntu machine. (the old card failed)...
SYSTEM >> ADMIN >> HARDWARE DRIVERS - says my video card is active / running.
- The Installation guy - Didn't install the drivers (the CD was for a WINDOWS machine)
1) The driver may be installed & running - However - How do I know / test that it is the *RIGHT* driver for the new video card installed ?
2) How do i tell / find out the brand name of the physical card ?
(the CD disk says SAPPHIRE / ATI Radeon)
View 1 Replies
View Related
Oct 21, 2010
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
View 3 Replies
View Related
Aug 7, 2011
i cant install my graphics drivers. Everytime i do, i get a black screen of nothing on restart. I'm running ubuntu 10.10. here are my graphics cards.
[Code]...
View 1 Replies
View Related
