Ubuntu :: Black Screen After Nvidia Driver 185 Installed?
Jan 25, 2010
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies
ADVERTISEMENT
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Nov 29, 2010
I've been using ubuntu fine for a while when I decide to activate my nvidia graphics card.After rebooting, however, I hit nothing but a black screen. I've searched the nets and others have seemed to solve the problem after hitting alt+ctrl+f1/f2 and editing some files after that, but that doesn't work for me. Booting into recover console gives me nothing but a long stream of white words before it runs to --> done. and then it goes back to a black screen. Running from Live CD I can't access my ubuntu files.
View 3 Replies
View Related
Oct 21, 2010
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
View 3 Replies
View Related
Sep 23, 2009
NVidia FX5200: nvidia-glx-173xxx The problem is that, when I install it, upon rebooting, I get a black screen with one blinking underscore at the top left corner. I somehow managed to get into the console and .. there's something wrong with the video card driver ( no way I could catch it into a picture ).
This was the exact reason why my Fedora CD was laying on the corner for months - I remember having this issue earlier as well.
Is there a way to fix it or at least, recover from a broken video card driver ?
View 4 Replies
View Related
Nov 8, 2010
I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21
View 9 Replies
View Related
Jun 29, 2015
I have a system running a fairly new copy of Stretch. I have an nvidia Geforce 210 (on my desktop)
Code: Select allVGA compatible controller: NVIDIA Corporation GT216 [GeForce 210] (rev a1)
Previously running Squeeze I was using the proprietary driver and never had any issues. Now using the nouveau driver video playback of mp4 files is glitchy and programs like google earth don't operate smoothly. I installed the nvidia driver from the repositories based on this guide, used nvidia-xconfig to generate an xorg.config file. I made sure noeveau was blacklisted and rebooted my machine.
I was greeted with a black screen. So I booted up in recovery mode, used telinit 2 (side note: what happened to /etc/inittab???) to change to a runlevel that doesn't start X, and confirmed that nouveau was, in fact, not loaded. Typed startx and without any errors or warnings the screen went black. ctrl+alt+fN wouldn't bring me back to a terminal, but hitting the power button did shut down X and halt the machine.
I'm not really sure how to go about debugging this as I get no useful output from anything, just a blank screen and that's it.
For the time being I just blacklisted the nvidia driver and let the system boot with nouveau; I'd still like to get the nvidia driver working properly, though. I've always just downloaded the driver right from nvidia and installed it, but I know that isn't the best way to do it. I'd rather not screw up a brand new system, it's so nice and fast with the new SSD.
View 5 Replies
View Related
Dec 24, 2009
I had a fully working Nvidia driver setup in FC 12 with no problems using an old LG monitor (LCD panel) on a VGA connection. I have just replaced the monitor with a newer Dell model that has a DVI connection. I plugged it in and got nice Post Screen, FC 12 boot progress display but when it got to displaying the login screen it went black.
Ctrl +Alt+F2 took me to a command prompt where I can type commands no problem. If I change the driver to the Nouveau (and Chattr +a the xorg.conf file) I get a lovely gui. So far nothing I have tried has let me use the Nvidia driver. I have searched around Google and tried nvidia-xconfig, system-config-display, livna-config-display xrandr (which fails to work at all) but so far I have got no where.
View 5 Replies
View Related
Apr 29, 2011
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies
View Related
May 19, 2010
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video. I read somewhere that the nouveau driver that installs by default with ubuntu 10.04 does not support VDPAU. So, my first step is to install the nVidia proprietary driver. I tried following a half-dozen different guides for doing this, none of which worked. Let's take this one for example: [URL] I purge. I reboot. I run the Nvidia installer (NVIDIA-Linux-x86_64-195.36.24-pkg2.run). I get:
Code: ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.195.36.15' for copying (no such file or directory). So, I run: Code: sudo apt-get install nvidia-glx-185 nvidia-185-modaliases I try the nvidia installer again. It works. I reboot. I get a message saying that ubuntu is running in low graphics mode, because loading the nvidia kernel module failed. I check /var/log/messages and see: Code: API mismatch: the client has version 195.36.24 but the kernel module has version 195.36.15. I take a Tylenol and here I am.
View 9 Replies
View Related
Apr 10, 2010
was just wodering if anyone know if HoN works with wine ? and why it doesn't work with ubuntu cause I installed it and only a black screen came up what is wrong ?
View 2 Replies
View Related
Feb 11, 2010
I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
View 1 Replies
View Related
Jul 28, 2010
I have Asus N61jv laptop with optimus, and i use ubuntu 5-6 months, i know that i can't use my nvidia graphic card, today ubuntu offered to install nvidia drivers and I accidentally clicked, after restart i see only black screen, can someone explain me how to get back to a previous state, i found some topic with this solution "except booting to a live cd and disabling gdm.". How can i fix this problem, i have important data on ubuntu?
View 3 Replies
View Related
Jan 21, 2010
I installed the newest restricted driver for my gts8800 nvidia card in an attempt to get starcraft b.net to work. Come to find out this has been a long standing bug with the menus not redrawing properly. My question is, now that I've installed the restricted driver 188, how do I go back to an open source one?
View 1 Replies
View Related
Sep 12, 2010
I just installed an nVidia driver for my Dell laptop running the latest flavor of Ubuntu (Lazy Lynx, or whatever it's up to). After it rebooted, the screen came up black. I have no video. How do I get rid of this driver and get my video back?
View 11 Replies
View Related
Jul 24, 2009
I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
View 14 Replies
View Related
Feb 23, 2011
I mucked my system up while trying to install proprietary nvidia drivers -- I was careless and installed the wrong ones (should have used legacy drivers). Now my system hangs on "starting udev" during boot.I have tried many combinations of boot options in an effort to blacklist the problematic driver. Attached is a picture of my boot screen after specifying the options "single init 3 modprobedebug", and removing the options "rgbh quiet". For some reason I am having a lot of trouble blacklisting the correct module, or maybe I caused a kernel problem, which in that case is beyond me.Also, boot option syntax question: can I specify something like "rdblacklist=*nvidia*" using wildcards?
View 5 Replies
View Related
Mar 27, 2010
I have for like 4 days now been doing a SourceMage 10.0 install on my K7 PC. I cant get X to start and cant get the nvidia driver installed
1) which Nvidia driver to use?
Heres my PC's specs
http://multidistro.com/K7
Also, I have made a .xinitrc for LXDE in /home,etc
and have it all set up; but X wont run
I am trtying to use driver legacy 96xx
[Code]...
View 11 Replies
View Related
Aug 5, 2009
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
View 3 Replies
View Related
May 28, 2010
Quote:
product: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz
vendor: Intel Corp.
[code]...
View 1 Replies
View Related
Jun 2, 2010
I just installed My first Linux / Ubunto. PC as a Nvidia 8600, installed Nvidia driver. Very poor quality display. Using ViewsonicVP231wb.
View 9 Replies
View Related
May 29, 2010
I installed Ubuntu 10.04 using Wubi. Everything works well, but randomly while I am working my screen will go black and say out of range or no signal. My monitor is a Planar, I have resolution and refresh rate set at factory specs and most of the time it is clear and working well. It seems to be completely random, sometimes it happens while surfing the web, other times I am using gimp, and sometimes I am not near the PC at all. I assume the problem is also the reason I can not use Compiz as well. (Graphics card is a intel 845).
View 6 Replies
View Related
Mar 15, 2010
I finally got around to installing the Nvidia driver (gotten from Slackbuilds.org).
Overall, I'm pretty happy with it, but it wants to default to 1280x1024 resolution and we prefer 1024x768 on our old 17" CRT monitor.
No matter what I do, though, it starts up in 1280x1024. We start X from runlevel 3 and go into KDE 4.3.1.
It is not difficult to change to 1024x768 using the Nvidia configuration utility, but then the menu fonts are HUGE -- especially in Thunderbird and Firefox.
My xorg.conf is below.
xorg.conf:
Code:
View 3 Replies
View Related
Apr 16, 2010
On both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
View 2 Replies
View Related
Nov 30, 2010
Running ubuntu 10.10, had to use nomodeset to successfully boot from cd into "Try ubuntu without installing" thing and install ubuntu.
Edited grub by adding nomodeset after quiet and splash in order to boot from hard disk, still booting that way as I'm writing. The computer is an All In one Pc called ONETWOPWU44. The graphic card is an NVIDIA g210m.
After booting into hard disk I installed the proprietary driver resulting in an alternate of white then gray then black then an Image with red blue and some other colours on the screen, not sure of the order but they came one after an other, right when the login form should appear, I am then able to login by tipping my password into the form and pressing enter, I now that cause I can hear the sound when the system loads but the above described situation continues.
I had the same result with an older nvdia driver it was 253 something, don't remember exactly. Then I downloaded the 260.19.21 driver from nvdia website and installed it, with this one I only got a black screen. I now have a fresh ubuntu 10.10 copy and would like to be guided in making this work. How do I install the driver corectly or how do I enable nouveau 3d support?
View 8 Replies
View Related
Dec 11, 2010
I had Ubuntu 10.04 running fine. Then I got curious about NVIDIA XServer.
"ATI Technologies Inc RV380 [Radeon X600 (PCIE)]" - Video Card
I opened it up, clicked a settings change, and said OK.
It said you need to update your blah blah blah.
Then it said blah blah blah doesn't exist.
Then it said it would create it for me.
Then I said REBOOT!
Now I get a black screen of death.
The only way I can get anything to happen on my monitor that comes from this computer is to boot into the Install Disk and say "TRY UBUNTU".
View 6 Replies
View Related
May 18, 2011
I have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
View 8 Replies
View Related
May 15, 2010
I'm not sure what Nvidia driver I installed the other day, but it's messed things up. After Ubuntu boots up and asks for login, I am greeted with terminal. Setting 1152Xwhatever resolution failed. Setting to 1024X768. My xorg.conf.old file is completely empty, so I have no idea what the original settings were. I have tried removing and reinstalling xserver.xorg but that hasn't seemed to get me anywhere. I have also used the "apt-cache search nvidia" command to see what drivers could be installed, but every single driver that I attempt to remove isn't installed.
View 5 Replies
View Related
Aug 29, 2010
Can't enable 3d effects on lucid lynx even if restricted nvidia driver (v195.36.24) is installed and activated. Actually 3D effects were working with compiz etc, but at a given moment -not sure if after the final release of the 10.04 - they stopped working, and now it always fails to enable them.
View 1 Replies
View Related
Dec 26, 2010
I just installed Ubuntu 10.10, and I really have no idea how to login. When I first start it up, it is a black screen and a lot of codes and stuff pop up. It says to login, so I do, but I don't know how to get past that. How do I get to the desktop? I have no one else to turn to...
View 6 Replies
View Related
