Ubuntu :: Windows Xp Beside On Boot Screen Doesn't Work?
Dec 3, 2010
Yes, I've been trying to get Windows xp and Linux Ubuntu installed on my computer in the boot screen to pick from one but Linux ubuntu works but Windows xp won't even boot.I just sets there With a little line like that just blink for hours and nothing happens I end up just pulling the power plug to restart the system back into Linux because the side by side Install didn't work.There was software, that should allow me to do this but I forgot what it was, software that would allow me to set Linux ubuntu in the boot screen .
View 4 Replies
ADVERTISEMENT
Dec 25, 2010
I'm having a pretty serious problem, whenever I try to boot into Ubuntu the screen goes black, I see a flash of purple or violet and then i get a prompt asking for my login credentials, afterwards I'm stuck with a terminal trying to start the gui... I don't know what I'm doing wrong, fresh install tried to reboot after getting the display driversinstalled idk if that could be a problem. I tried to commands in the terminal already:
startx
sudo service gdm start
return = start: Job is already running: gdm
View 1 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Jun 11, 2009
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies
View Related
Oct 3, 2010
anyone has a clue why 'ctrl+a, k' nor 'ctrl+a, :kill' doesn't work for killing one of screen windows? Other screen's commands invoked with 'ctrl+a'seem to work.
View 3 Replies
View Related
Aug 7, 2010
I have windows installed through virtual Box now but i have some questions. When i make it full screen it goes full screen but Windows stays in the middle of the screen small and doesn't adjust to the full screen. Can you make windows completely take up the full screen Can i access folders on my ubuntu drive ? i have a file in downloads i want in windows but don't want to reinstall it
View 4 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Mar 21, 2011
I've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies
View Related
Jul 12, 2010
My current version is
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.10
DISTRIB_CODENAME=intrepid
DISTRIB_DESCRIPTION="Ubuntu 8.10"
Whenever I try to pla a video in full screen mode, it crashes. How can I fix this?
View 1 Replies
View Related
Oct 10, 2010
I downloaded and did a fresh install of 64bit 10.10 RC a couple of days ago.I've run the Update Manager and everything is up to date.The sceen saver doesn't work. After the set idle time, the screen remains at the desktop and never goes blank. I set it at System / Preferences / Screen saverI have Regard the computer as idle after: 4 minutes
I've checked Activate screensaver when computer is idle.I've checked Lock screen when screensaver is active. I have it set to just do a blank screen.I have a 10.04 machine and a 9.somethingorother machine and the screensaver works normally on both of those.
View 1 Replies
View Related
Nov 24, 2010
I have inadvertently caused the main menu (Applications,Places and System) icons to change to a single icon, a white triangle. I've tried to put back the default but no luck. How can I restore the original?
On workspaces, I created a second workspace but the Workspace Switcher doesn't want to show the 2nd workspace; the display should show a blank window. Also the split screen option doesn't work. Do I need an applet (Pager) to sort this out?
View 2 Replies
View Related
Dec 16, 2010
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies
View Related
Oct 21, 2010
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
View 3 Replies
View Related
Jan 5, 2011
afeter installing ubuntu studio 10.10 a black login screen after login it asking me to type a command i've typed '' startx '' but it does't work
View 2 Replies
View Related
Sep 12, 2010
i wanted to ask you for help in setting up a cronjob, that restarts a game server.By now I made a script that kills the screen of the server and then restarts it.
View 2 Replies
View Related
Aug 15, 2010
I've been playing around with xdmx for quite a while now. Everything works fine, but my keyboard goes "crazy". I've tried all the command line options to set model etc. For example the cursor keys capture a screenshot. The letters work, but capslock/shift doesn't, etc..Today I tried to create a dummy screen in xorg.conf and then vnc into it. Then the mouse didn't show or work in the vnc client.
Is there any way to fool the nvidia driver to think that there is a second display connected? I think that would work better. The dummy driver doesn't have xrandr etc.I'm trying to get this to work on my desktop and laptop. They both have totally different hardware.I'm running Ubuntu 10.04 and xdmx and vnc have been pulled from the default repos.
View 3 Replies
View Related
May 26, 2011
i had an nvidia geforce 6800 card in my pc and that just all of a sudden stopped working (the screen went blank) so i went to my onboard video and it works but no matter what video card i install, it doesn't work (still a black screen) and i know the cards work on other pc's but just not this one. i've tried different ati cards and nvidia cards with no luck. i've also wanted to disable my onboard card all together but my bios doesn't have that option for some reason. i also thought that it might be the slot but when i install the video card in the pc, the fan works so it's not that.
View 4 Replies
View Related
Jan 14, 2010
I have a few issues with my new install of Ubuntu. My screen resolution doesn't go above 800 x 600 and my sound card does not work. I believe these are driver issues.
[Code]....
View 9 Replies
View Related
Mar 21, 2011
i have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
View 9 Replies
View Related
Feb 7, 2010
So here is what I'm trying to do: I want to share a folder and have it so that guests can access it, but only read. I also want to make it possible that I can mount it as a network drive on my Windows 7 machine and login with my linux account so that I can have write access. This is from a completely stock Ubuntu 8.10 and Samba config. Everytime I've tried I've failed to get it working.
View 1 Replies
View Related
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
View Related
Apr 8, 2010
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies
View Related
Feb 8, 2010
how to go about getting Ubuntu to receive an ad-hoc wireless ICS enabled connection. The internet connection is shared through a virtual machine running XP (with the USB wireless dongle under XP's control), on my desktop PC, in order to escape my ISP's no NAT policy. Ubuntu is on both the desktop PC (the sender), and the laptop (the receiver). The desktop and laptop also run windows 7. I managed to get my laptop Ubuntu to connect to my virtual machine XP, by setting the IP, subnet and gateway of all wireless devices, as was suggested in [URL] - I did use the Network Manager GUI, but pinging the desktop doesn't work.
Even with the IP configuration, Windows 7 on the laptop receives the internet fine. The next step is getting Ubuntu to receive. I can do any kind of configuration in a virtual machine, such as install Ubuntu. In virtual machine XP I used 192.168.0.1 with subnet 255.255.255.0 and gateway 1.1.1.1. On the laptop Ubuntu 192.168.0.2 same everything else. I understand nothing about networks. I know there is stuff I can do in the console, but how will Network Manager cope with me doing that?
View 1 Replies
View Related
Jun 17, 2010
noticed that the button at the bottom left corner of the desktop doesn't work.It is supposed to hide everything on the desktop and when clicked again bring everything back.I was jacking around (learning) with Compiz yesterday, but not sure how that could affect it.
View 2 Replies
View Related
Mar 25, 2011
I want to upgrade Ubuntu 10.10 installed through Wubi to 11.04. Now, Windows doesn't work. I can't upgrade Ubuntu by it because it is impossible to download files. Can I upgrade it without connecting Ubuntu to the Internet and starting Windows?
View 5 Replies
View Related
Oct 2, 2010
I'm a visual effects artist and although many VFX post production houses use linux, I've always used windows because of the programs. At this point, I've migrated to different programs which are also available on linux. The only set of programs I won't have, would be the Adobe Suite. So, I decided to finally start using linux again. I used it back when I was a kid for a few years, but just to have it really. We mainly use macs at work, but I'm switching to linux now.
Since I mainly use Autodesk Maya, the first choice would've been RHEL. Which is why I'm here now, you can guess.
I've downloaded the .iso of CentOS 5.5 and checked it against the hashes and it came out fine. I burned it to a DVD and booted my main computer (I have 3 I plan on installing it onto) and tested the media, came back fine.
I have two HDs, one 1.5TB SATA and one 150GB SATA. The 1.5TB is the C: drive of windows, and I've shrunk it to allow 80GB for linux.
So that is sda. sda1 is the windows partition and I make sda2 ext3 out of the empty space by choosing the custom partition scheme. It installs fine.
However, booting up the computer boots straight to windows. No GRUB.
I've reinstalled many times now, changing the GRUB from sda to sda1 to sda2. Nothing.
[url]
I've adapted that guide to CentOS and tried that, but whenever I select the CentOS option during bootup, the computer instantly restarts itself.
I've tried reinstalling the GRUB via a Live CD like many googled sites say to, but I always get errors.
If I find the /boot/grub/stage1, it says it can't be found.
If I try to setup GRUB, it says /boot/grub/stage1 is unreadable
So, I download the Ubuntu CD and install that. I use the guide previously posted to do the same thing, by installing GRUB onto sda2 where Ubuntu is.
So I pick that option on startup and it brings me to Ubuntu's GRUB menu. It all works fine. CentOS doesn't though.
Ubuntu is using GRUB2, so it has a grub.cfg file. Inside the file near the end, it lists Ubuntu as (hd0,2) and windows as (hd0,1).
That shouldn't be right? What's (hd0,0) then?
The CentOS grub.conf file lists CentOS as (hd0,1) and windows as (hd0,0). That should be correct. But I change it anyway to (hd0,2) and (hd0,1) and it still doesn't work.
View 6 Replies
View Related
Jan 4, 2011
I've just installed Windows &, but now my internet doesn't work. How is that possible?
View 2 Replies
View Related
Aug 7, 2010
I was upgrade my PC's RAM to 4GiB on 32bit platform, the problem is when I set AGP appture size to 64 MiB suse was detect physical memory at 3.4 GiB but when I set AGP appture size to 32 MiB or lower physical memory was detected at 3.6 GiB but I can only boot with failsafe mode, desktop mode doesn't work and screen goes to blank and I want to use the whole 3.6 GiB.
View 2 Replies
View Related
Apr 3, 2011
My screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 Replies
View Related
Sep 16, 2010
I'm new to linux, and I'm just trying to learn OpenSUSE. I just installed it and I have a few quick questions. #1 I accidentally installed the "OpenSUSE Installer (LOCAL)" on Windows 7, so now I get the option to choose windows or the installer at the windows boot screen. I ended up just installing OpenSUSE on a completely different HD (my original intent) from a burned DVD, so this installer is useless and I don't know how to remove it.
#2 After installing opensuse on my second HD, the boot screen is now SUSE's instead of Windows, and I can choose suse's desktop, the suse failsafe, windows 1, and windows 2. Windows 1 brings me to the windows boot screen with the choice i mentioned above (windows or the local installer i accidentally installed), and windows 2 i assume is my second windows partition which is just my SWAP file, and selecting it does nothing (which would make sense if thats all it is).
My question here is how do I make it so my default boot screen is the windows one with an option between windows 7 or suse? Or would this require reinstalling the system? If it does and its simple enough to explain please do I wouldnt mind removing it and reinstalling at this point, I would just wipe my whole second HD from windows.
#3 I have a netgear adapter. unfortunitly i'm not at home right now and I don't remember the model, so I'll provide that this evening if necessary. What I do know is they do not have a driver for linux. I've found ACX100, but I didn't find my netgear adapter listed on their website. I also found NDISWrapper, but thats for XP and I still don't know if that'll work. I will of course try both unless someone here has a better solution. If anyone knows anything that will work on any netgear adapter for linux please let me know, if not then I'll provide the model later on.
View 1 Replies
View Related
