Ubuntu :: The Center Of The Screen Is Not Responsive To The Mouse
May 20, 2011
I have recently did a fresh install of Ubuntu 11.04, before that i had 10.04. In the new installation i have a problem with the mouse that did not exist before: some of the radio buttons and some links in web pages are not responsive. further more, while writing this post, the mouse does not change its icon to text icon when i hoover over the post's text. it happens also in web pages when it does not change to hyper-link icon over some links. it seems that there is a certain area in the canter of the screen where it happens.
I have a machine running XFCE in a "kiosk" environment. The machine normally runs without a keyboard or mouse, and I remote control it via VNC and SSH.
When the machine starts up, the mouse cursor sits in the center of the screen. I don't want to plug in a mouse or use VNC to move the mouse to the bottom-right corner so that it is not visible, so is there a way to hide the mouse cursor or tell it to move to the lower right when X starts? It would be even cooler if the mouse could be disabled or hidden when no mouse is connected, but re-enabled when someone plugs in a mouse, but that's probably asking too much.
So I upgraded from 10.10 to 11.04 beta 2 two days back. Upon trying to use the system, these were the problems I had:
1. Mouse is absolutely not responsive. Even the cursor is not showing.
2. When I login through keyboard options only once this message flashed "Unity not supported by your hardware switch to classic mode on your next login". It flashed once, took me to the desktop screen where the classic desktop was available and I could not access anything without keyboard shortcuts.
3. When I tried launching firefox, deluge or even tried using the terminal to connect to the net I am unable to connect.
4. My USB devices are not read.
5. I finally tried to do a clean install of 10.10 using the live cd I already have but the OS is not booting from the cd.
As a result I am stuck with a comp which has no mouse, no internet, no usb support, no cd support. Do you guys have any idea how I get it to work again?
I installed slackware 13.1 lately to a laptop. its a toshiba satellite m40 185 if it makes any difference. In any case, and while the touchpad works flawlessly, connecting a standard USB mouse to the pc does not power up the mouse (its a microsoft notebook optical mouse) and of course the mouse pointer does not follow the mouse's moves... no clicks either.
Basically when I do
Quote:
I don't see junk printed on my terminal, whereas moving around the touchpad I do see some.
Just to clarify, It's not just X that is not working, gpm doesn't get mouse moves from the usb mouse either (touchscreen works flawlessly in console too).
my xorg.conf looks like:
Quote:
I added the last 2 options after following this guide, which seems to cover concurrent read-in from more than 1 pointing devices.
All the other guides I found assume that you have a working gpm.
One question is: since with the new radeon drivers the xorg.conf file can be missing altogether and X will not cry, does it make any difference to add mouse options in xorg.conf?
Continuing my thought: it must be something else. Kernel doesn't seem to be the problem. The USB subsystem works since usb mass storage devices (that's all I have sitting around) are sensed by the kernel and udev properly. Additionally, the problem persists with the huge kernel.
Before slackware, I used to run fedora on the laptop and both pointing devices worked properly, however I think fedora uses another method of setting up the X server devices..
I found the paste function of the center button is really annoying. Usually I use the center button to scroll up and down inside an editor, but when I scroll really fast occasionally I would press down the center button. The editor ended up paste whatever on the clipboard. Is there a way to disable it? I want the center button to function only like a scroll bar, no paste.
When I try to adjust the mouse and keyboard parameters, changes aren't applied. I adjust them to were I want to, click on accept, but then when I look on the settings again, they are set to default again. This must be some kind of bug. I already updated using the LXDE repository.
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
I just installed Ubuntu 10.10 on an older Biostar IDEQ 200N SFF computer for my son. I am by no means a linux expert and I am having a problem I can't seem to resolve on my own. I am using a CRT monitor, and the image on the screen is not aligned properly with the monitor. Everything seems shifted down about a quarter of an inch or less. Even the usual click areas are no right. What I mean that is order to click on a link or icon, you actually have to click slightly above it. I know the CRT monitor has screen adjustment controls, but this seems to be linux or hardware related. I have tried changing the resolution, and for a brief second after I change the res it does seem to correct the problem, but before I can even tell it to use the new settings, it shifts itself back down. What can I do? Do I need to install different drivers or something else?
On some but not all of the apps listed on the Ubuntu Software Center, I can see the app and select it, but after I click the arrow that points right that should take me to the screen that describes it and allows me to install it is blank. The tabs at the top say that I am at the right window but nothing is there. Is there a way I can make that work?
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit: I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
Is there any parameter for this? For exampleCode:gnome-terminal --maximizestarts Terminal fullscreen. I want to start calc in the screen's center so I won't need to search it on the display every time I run it. It'a annoying.
I just did a fresh install of natty, installed a few programs along with the ati catalyst control center.
I am having serious login issues, here is what I do:
I am at the login screen right from start-up, type in username and passward and hit enter, screen goes blank, it appears I am logging in, ubuntu plays a sound and puts me back at the login screen. I do not get an "Authentication Failed" error like I would expect. Unable to login as myself or as root.
However, I am able to login if I select the "safe mode," I am not able to login under the normal mode or the ubuntu classic modes.
I suspect that this issue has to do with the ati proprietary drivers, after playing with the settings for a while in safe mode I am now able to login to the normal natty mode without any apparent issues.
Here is what I changed in ati catalyst control center to boot into natty mode:
I disabled the Xinerama and Tear Free options.
Under the 3D settings, I selected the "override application setting" for all the 3D settings I could.
I believe I still have some display issues as I am unable to drag windows from one display to another, my mouse is able to move just fine across displays though.
I also found that enabling Xinerama prevented me from logging into the ubuntu and ubuntu classic modes, but I was able to login to the ubuntu with no effects mode.
when i start an application it usually places it in the upper left corner or lower right corner or something like that.. but never in the middle of my screen. How can I configure GNOME to always open applications in the middle of my screen..?
I am running Ubuntu 10.04. I have a HP Pavilion Dv7 Laptop, 4GB of ram, An AMD Turion X2 processor, my main HDD is 250GB Samsung and my other internal HDD is a 250GB Western digital. I am Very new to Ubuntu and the forums, So i wish to apologize if this is posted in wrong section. Now on to my problem, While using my computer the screen will go gray(all open windows), and my HDD light stays on. I never had this problem before on my other computer that has Ubuntu on it too. And as i said every window goes gray and the HDD light stays on and it happens randomly. It will come back to normal some times but others i have to Force Power down.
I'm a total Linux noob, but I've needed a working development server for a while so I've put together an old celeron box running Ubuntu Server 10.10.The box runs fine, as does the Apache and MySQL servers, even if they did take a little while to fine tune!The problem I have is that vsftpd doesn't respond unless I'm logged on locally or via putty. As long as a local user is logged in, it's fine. If I try to connect when noone is logged in, then the connection times out waiting for the server message, and thereafter I have to login and stop / restart the vsftpd to make it work again.I'm not sure if the vsftpd is set to run on boot or on login and I have no idea how to check. Vsftpd is set to allow only local users, of which there is only one - so I can't check if it would work with any user logged in
I'd like to make all window of of all applications are located in the center of screen when they are started every single time, is there any way to do that ? of course,what i am saying that they are GUI apps, and when they are not started as maximum size window
I just reinstalled Ubuntu at least twice for this problem: Minidlna starts fine for a few minutes, I can see it on the network with my television, windows and even my phone. However, after a few minutes (say one hour), it stops being there. The process keeps running, and is kinda responsive to rescans and restarts. However it becomes unusable after a few minutes. The last reinstall was pretty basic: Installed Ubuntu 9.04, upgraded to 10.04 (servers), installed minidlna, wait and... bam! So there were no conflicts in all that, so what could make minidlna stop being responsive?
My several-weeks-ago-installed squeeze KDE is very slow when browsing the files and directories, and also opening applications as compared to my WinXP.
I've installed both Fedora 15 x64 and Fedora 14 x64 on an HP Proliant DL380 G4 with the HP SmartArray SCSI controller, 2x146GB UW320 SCSI drives.The server was running RH v4 with a hardware RAID 1 with uptime of 400+ days with no issues.I broke the HW RAID and made 2x volumes and software RAID. I have another identical server with 4x 146GB UW320 SCSI drives with Fedora 12 x64 and SW RAID, so I figured 14/15 should be the same process.What happens is the server runs great for a while, but when I leave it for a few hours, it becomes non-responsive. I've re-installed 15 and 14 multiple times now and also installed NRPE, which shows load increasing to the point to where the server is non-responsive. It hits high load levels (as reported by NRPE). The load levels appear to be increasing over time. Such as last night:
log off at midnight, load average 0/0/0 2:03 am - WARNING - load average: 9.91, 8.85, 6.75 3:03 am - WARNING - load average: 16.91, 15.86, 14.47
I am a GNOME user but because of the release of GNOME 3 i decided that i may have to start using KDE. So i installed KDE 4.6 from the qt-kde debian repository. It works more or less OK but i have a problem with the performance. It just doesn't feel as snappy as GNOME. For example if i have minimized Firefox when i maximize it it takes about a second for the window to draw and until then i just see and empty window. Or when i open nautilus it too takes a little to open and draw the window. Overall KDE seems a little unresponsive. Is this normal? And second, from time to time there seems to be huge performance issues - KDE suddenly becomes very slow - programs take a while to open, and the windows draw even slowlier than what i described previously. Also whenever there is a slowdown (like for example when i start a program) i hear some kind of scratching noises from a my laptop - like there is a heavy hard disk activity. I've heard that kind of noises before when doing something very demanding like compiling or archiving something.
Is there any way to make KDE more responsive and faster. I have disabled strigi and nepomuk.
I am running KDE on Debian Unstable with kernel 2.6.39-1-amd64 and NVidia driver 270.41.19 on a Thinkpad T61 laptop with Intel Core 2 Duo T9300, Nvidia Quadro NVS 140m and 4GB of Ram.
Firefox, pidgin, thunderbird, intelliJ, even emacs!!!, or perhaps it's gnome in general will periodically stop responding. All named except emacs tend to gray out while this freeze is happening.
I need to figure out if mythfrontend is non responsive. If the frontend was closed by accident, this code restarts it for me as a cron job.
#!/usr/bin/perl use Env; $ENV{DISPLAY}=':0'; my $result = `ps aux | grep front`;
[code]....
If I run the above code it works (mythfrontend restarts) however, there are times when the frontend becomes non-responsive and I'd like to detect a non-responsive state but I don't know how. Additionally, I don't have a keyboard on the mythfrontend, just the remote control.
So after I went to OMG ubuntu site and downloaded "complex shutdown" since it looked useful and I needed it I installed it..but it doesnt seem to start up for some reason so when I went to uninstall it software center went "blank" just a grey screen with the black toolbar
So about an hour ago I put my computer on standby. For whatever reason I couldn't bring it back so I restarted it. It works fine except now Ubuntu has pushed my display down. This means that the bottom of my tool-bar on the bottom of the screen is cut off, and there's a black bar on the top. I'm using a T.V. screen so there is no way I can manually adjust it. I also plugged my desktop back into an old monitor and it was off-center downward too.
For about a month now, my mouse has been jumping to one of the corners of my screen every few minutes (normally the top-left). I also had a problem where the right mouse button would double-click 90% of the time.
I just replaced my mouse a few minutes ago, and now the right button works fine, but the cursor keeps jumping to the corner of the screen.
I'm fairly certain this is not a hardware problem, since switching mice did not fix the problem.
I am using Ubuntu 10.10 on my Dell Inspiron 1525. I haven't have been having consistent internet connection, hence haven't updated for much of the time. Yesterday I tried to update the Firefox browser from 3.6 to 4 and ran
Code:
sudo apt-get install firefox
It told a amount of around 57 packages would be updated in the process. After the installation I shutdown and went to sleep.The system now boots to purple screen ubuntu dot loading and then to black screen with the mouse pointer in the centre. Then nothing happens. I searched in the forums and tried to go to recovery mode and ran dkpg, then failsafeX, but failsafeX cannot detect my input devices, Hence I can't do anything.
