When I try to adjust the mouse and keyboard parameters, changes aren't applied. I adjust them to were I want to, click on accept, but then when I look on the settings again, they are set to default again. This must be some kind of bug. I already updated using the LXDE repository.
View 9 RepliesI use the debootstrap to make a base Debian System of the ARM architecture for BananaPro [URL]... , and install the LXDE desktop. But the keyboard and mouse didn't response after the LXDE boot.
If I use the Debian system without the LXDE desktop, and it is normal. Meanwhile, I only installed the framebuffer driver, and can't find the right GPU driver to install.
Is caused by the lack of the GPU driver ? and what should i do ?
I get some error logs from /var/log/Xorg.0.log file,as follows:
Code: Select all[ 17.206] (II) Module shadow: vendor="X.Org Foundation"
[ 17.206] compiled for 1.12.4, module version = 1.1.0
[ 17.206] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.206] (==) Depth 24 pixmap format is 32 bpp
[ 17.207] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 17.211] (==) FBDEV(0): Backing store disabled
[ 17.212] (==) FBDEV(0): DPMS enabled
[Code] ....
I have 2 computers running Ubuntu 10.04, One of them have a screen, keyboard and mouse connected (all wired)I want to control the other computer in some way, like a virtual PC in a window, via my network or a cable.
View 4 Replies View RelatedIn the past few days Ive noticed a lot of updates. Yesterday morning several times I went to click on items on my desktop and I couldnt. I thought it was just my batteries getting weak. Yesterday afternoon it got so bad I couldnt click on anything for hours at a time. I could only power offIve been reading lots of forums and threadsd there are lots of possible problems to this but they all come down to xorg file and usb issues.
An example of one possible problem: When I have the system log open I can not move the app around, make it bigger or smaller, I can only scroll on the right pane and have to use the mouse keys to navigate the left pane. And if I want to shut the app down, sometimes I can use the ctl+F to close it but sometimes I cant.After I shut the app, any app that is, the mouse pointer turns to |< and I cant click on anything for 5 min to 5 hours. It was suggested to run sudo dpkg �reconfigure �phigh xserver-xorg but when I did I didnt see anything visually or in the terminal occur.
I installed OpenSuse 11.4 Gnome on my Toshiba laptop. A couple of things i noticed while trying the live CD first is that the file manager recognized my NTFS partitions and after I installed I expected it to do the same. Also, while installing I thought I selected a secure logon with username & password. After installation it boots right into the desktop GUI. I haven't had a lot of time playing with OpenSuse yet and I have browsed through some threads and I couldn't find a way to configure a secure logon and do I have to mount the Windows partitions in the Command Line or is there a tool I can use in the control center?
View 7 Replies View RelatedI am using openSuSE 11.3 and LXDE.
How can I switch between British-English layout and Greek layout in LXDE?
I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.
I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.
About a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
[Code]....
This is the error message I got today when updating.
patch:yast2-control-center-4200.noarch conflicts with yast2-control-center-qt.i586 < 2.20.2-1.3.1 provided by yast2-control-center-qt-2.19.3-6.1.i586
I am a newbie of KDE desktop. Where can I find the functions of control center of Gnome in KDE desktop? For example, the "Remote Desktop Preference"
View 6 Replies View RelatedI'm having trouble with Yast, I noticed today that I can't open the control centre from the desktop (along with install/remove software) when opening from the command line I get. the following output:
** (y2controlcenter-gnome:9050): WARNING **: error accessing /desktop/gnome/lockdown/disable_command_line [Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)]
Yast2 control centre opens, but none of the options load when selected. I have tried updating everything through Zypper which didn't work. (aka zypper ref/up etc). Then I tried removing yast and installing it again. When I did this (and downloaded the Yast control centre again the above errors, reappeared.
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
Just a minor frustration, I have not found how to do this, double clicking serves what purpose? Am I going to change my mind between clicks?
View 2 Replies View RelatedAfter installation and deinstallation of XEN the main topic "Virtualization" is missing in the YAST control center.
Under "Software Management" I searched for "yast" but found no fitting module.
How can I reinstall?
Using a new Ubuntu 9.10 install with Wubi. I go into System > Preferences > Mouse and adjust the sensitivity bars and acceleration with no effect. Anyone got an idea for how to adjust this? It's too slow.
View 1 Replies View RelatedI used easystroke on ubuntu, and it worked well enough to be functional. I triend opening Xstroke in suse, but it just adds an icon down by the notification panel. right click and left click seem to turn it on and off, but i've yet to find any configuration menu of any kind. I've also found the 'input actions' section of the personal settings menu, but i'm having a hard time making heads or tails of it. Basically, what I need is pretty simple. I have a single application that I would like to add more control functionality through the mouse. I don't even necessarily need gesture control, in fact if i could just make my extra mouse buttons perform specific keyboard commands (F11, ctrl++, etc.) that would be fantastic. If I could set it to do different things on different programs.
View 1 Replies View RelatedMy mouse and trackpad button control is severely impaired in 11.3, KDE 4.5.1 (or .2) using Compiz. Gnome works fine. XFCE has some problems. The mouse control of window features is sometimes limited to one window with the rest of the desktop not responding to mouse actions. Popping up a second window from an app causes the mouse control to be completely lost. The issue leaves KDE effectively broken having only keyboard control. With some ESC key hits and using right mouse button to close one app (from the panel), I can move focus to another app but mouse control within the app is non-existent. Moving windows or raising or lowering doesn't work either. Sometimes, the GUI captures the mouse click but does not recognize the active App and applies it to objects sitting on the desktop screen underneath.
I've reverted partially back to the 11.3 installation DVD then reload updates and then moved to stable release of 4.5, then went back to the 4.5 factory. All failed to correct the problem. I removed .kde/.kde4 files and this did not help. What is wrong with my system? Also installed the latest kernel of the repos then reverted back to 2.6.34.7-0.3 [x64]. [very frustrating, been using Suse/KDE for >7 yrs, this one has me stumped]
fter booting into openSUSE 11.4 kernel 2.6.37.6-0.5-default, I cannot move the mouse cursor at all. Its light went off. I have MS Netbook Optical Mouse 3000. My Desktop has AMD Athlon X2 CPU.I can use the mouse with openSUSE 12.1 M2, Windows 7 and other distros in the same machine but somehow cannot with openSUSE 11.4
View 5 Replies View RelatedFresh install of OpenSUSE 11.2 and I'm having issues with sound. Installed what I needed for various codecs (mp3, dvd etc etc). Sound now plays through applications yet when I go to Control Center and try to adjust the Sounds, I get a dialog box that says "Waiting for Sound System to Respond" and it just hangs there.
This is an old Shuttle box with Nvidia onboard everything. I've selected all pulse and alsa packages and did a reinstall on them to no avail.
I own an ASUS G71V laptop and I run openSUSE 11.2 with latest kernel and patches.
I just tried to use Fn+F10/F11/F12 combinations to regulate volume, just to see if they work.
I found that (from KDE 4.4.3) I can see the pop-up volume indicator going up and down as I press the right combination.
Ok... unfortunately, hardware keys regulate the wrong volume slider as I can see by opening Kmix. The front-microphone channel instead of master is regulated.
Actually, I just found that if I click on the volume icon on the taskbar I get the front mic slider, which seems to be bad.
How can I tell KDE that the default channel is the "master"?
I want to make use of extra buttons on my Logitech RX1000 mouse.
For e.g. the zoom button I would like it to show windows on my desktop (ctrl+F9).
I've fired up xev and found out that this is button 8:
Code:
Then I've added to ~/.xbindkeysrc:
Code:
But that doesn't work at all.
I'm running suse 11.4 64bit and flash 11.0.1.60 My problem is that when I'm running flash if I give some keyboard input then my mouse (and only my mouse from what I can tell) will freeze for a second or so. This is most annoying when I'm goofing off playing a flash game that requires both keyboard and mouse inputs, since if I use the keyboard for anything I can't use the mouse for a second or so.I've tried searching the forums but I can't seem to find anything on this topic.
View 3 Replies View RelatedI have a weird situation. After installing openSUSE 11.2 on a machine it has no response to the keyboard and mouse. I then installed Mandriva 2010 on the machine and the keyboard and mouse work.
View 7 Replies View RelatedI have a recently installed version of opensuse 11.4 and I am unable to use the keyboard and the mouse at the same time. Whenever I type on the keyboard my mouse will become frozen for about 2 seconds and then will work as normal. It will happen with any key press. This problem became very apparent when trying to play first person shooters. I cannot move with the keyboard and look around with the mouse at the same time
View 1 Replies View RelatedI just installed the new OpenSuSE 11.2 release and after coming up in graphical mode the keyboard and mouse are not responding at all.
After that via a remote login force the machine back to runlevel 3 and this makes it able to login to the console and trying to start sax2 to make a new X configuration.
Well it doesn't read the old configuration but gets stuck as well.
The install was an update from OpenSuSE 11.1.
I am quite experienced in installing openSUSE. (I used it for many years.) But the problem showed below tricks me out.
I just tried to install openSUSE 11.2. In initmode 3 the keyboard works well. Everything worked well up to the moment I started runlevel 5. In XWindows Modus, the keyboard and the mouse are disabled. And I cannot get back to any other Virtual console.
When I started sax2, I get something (in the file /var/log/Sax.log) or both mouse and keyboard like this:
It indicates , mouse and keyboard are disabled.
Here are my questions:
How can I ENABLE my keyboard and my mouse?
Where is the file that configures sax2?
Do I have to set ("on") the AutoAddDevices? or to "off"
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
On our SuSe 11.1 PC keyboard and mouse are no more responding although it did work properly until yesterday. We shut down the computer yesterday evening and today they do not work anymore. But it is not a hardware problem, we can use keyboard and mouse until Grub bootloader, but as soon as we start a Linux session (doesn't matter if normal or failsave mode) the keyboard and mouse are disabled, we can see that because the NumLock and CapsLock LEDs are switched off immediately.
We have no idea what happened. We booted from CD into rescue mode and mounted the hard disk manually and checked some logfiles, but the boot.log tells us that USB keyboard and mouse are detected, as well as the Xorg.0.log file. And we found no indication that keyboard or mouse are disabled or something like that.
Today I installed openSUSE 11.3. I finished downloading updates, and restarted. I can get through the grub menu fine, but after that my keyboard and mouse fail to respond. On my windows partition(which is where I'm writing this) my keyboard and mouse work fine. If it matters, they are the Logitech Wireless EX100 keyboard and mouse set.
View 5 Replies View RelatedI'm about to add a wireless mouse and keyboard to the computer (running opensuse 11.2). Do I just plug them in? Do I have to load any driversDo I keep my wired keyboard/mouse plugged in at first?
View 2 Replies View Related