So after I went to OMG ubuntu site and downloaded "complex shutdown" since it looked useful and I needed it I installed it..but it doesnt seem to start up for some reason so when I went to uninstall it software center went "blank" just a grey screen with the black toolbar
View 2 RepliesOn some but not all of the apps listed on the Ubuntu Software Center, I can see the app and select it, but after I click the arrow that points right that should take me to the screen that describes it and allows me to install it is blank. The tabs at the top say that I am at the right window but nothing is there. Is there a way I can make that work?
View 1 Replies View RelatedI just did a fresh install of natty, installed a few programs along with the ati catalyst control center.
I am having serious login issues, here is what I do:
I am at the login screen right from start-up, type in username and passward and hit enter, screen goes blank, it appears I am logging in, ubuntu plays a sound and puts me back at the login screen. I do not get an "Authentication Failed" error like I would expect. Unable to login as myself or as root.
However, I am able to login if I select the "safe mode," I am not able to login under the normal mode or the ubuntu classic modes.
I suspect that this issue has to do with the ati proprietary drivers, after playing with the settings for a while in safe mode I am now able to login to the normal natty mode without any apparent issues.
Here is what I changed in ati catalyst control center to boot into natty mode:
I disabled the Xinerama and Tear Free options.
Under the 3D settings, I selected the "override application setting" for all the 3D settings I could.
I believe I still have some display issues as I am unable to drag windows from one display to another, my mouse is able to move just fine across displays though.
I also found that enabling Xinerama prevented me from logging into the ubuntu and ubuntu classic modes, but I was able to login to the ubuntu with no effects mode.
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
I have been working for the last three months with Ubuntu 10 on a destop. Doing just fine and loving it. I decided to try a new position for the toolbar that sits at the top of the screen. I did a right click and moved it to the right side of the scree, didn't like the look of that. Right click on the bar and moved it to the left, didn't like that either, so moved it to the bottom. having done all that I thought I could put it back at the top but alas, I can not right click on the Toolbar.
It seems as though the two bars are fighting each other at the bottom of the screen.I would like to go back to the default position at the top of the screen. I do have a terminal window available to me on the desktop so if I could find out the command line to type in, I should be able to reset my tool bar. Being new I have no idea what this command would be.
i have fedora 8 on my machine...i want to uninstall it..i restarted my machine with windows CD on it....but shortly after pressing key to continue configuring the installation, screen goes blank and computer becomes idle....i tried using about 10-15 different CDs of windows OS but failed every time...what could be the reason and how can i fix this......NOTE: but if i try to reinstall fedora the problem dosen't occur.
View 12 Replies View RelatedI just immigrate from Windows XP to Ubuntu 10.10 ( Ubuntu as OS Principal no Dual Boot ) I have a such problem with SKYPE, I talk with someone who had a webcam and after 5 - 7 mn it crash and the menu hide and everything even desktop background, and it shows a blank black screen I don't know what I have to do, I'm sick of tired of windows' blue screens
View 2 Replies View Related so I had a black screen when I was starting up my PC instead of the normal Ubuntu with the dots underneath. I have Ubuntu 11.04 on a dual-boot with Windows Vista. It would still boot normally and work fine but I wanted it with the Ubuntu and dots etc.
After looking at many sites to try and fix it that didn't work I found this: [URL]. That didn't work so I found this next: [URL]
I did what it said by removing
Code:
vt.handoff=7
Then when rebooted I got the Ubuntu with the purple background and dots but the boot would hang (always when all 5 dots were orange). I booted into recovery mode and I chose "File System Check" on reboot and it would get to the bit with 5 orange dots then it would check disk for errors and go to login screen then work fine.
If I added vt.handoff=7 it would boot normally with a black screen again.
RESULTS.txt is from when I had vt.handoff=7 removed and I was in Recovery mode>resume normal boot>"sudo bash ~/Desktop/boot_info_script.sh".
RESULTS1.txt is from when I booted up with the disk check and was in Terminal.
EDIT: Also just recently I'm getting a lot of boot hangs, freezes (where everything on screen will freeze and if I was playing music in Banshee it repeats the last 3 seconds until I hold down button on PC), and it will sometimes just restart randomly. Not sure if that related or not...
I am installing 11.04 on a Gigabyte E7AUM-DS2H with an onboard GeForce9400. I'm trying to turn this into an XBMC htpc. I'm not using xwindows or anything like that. Going straight to console for now. I'm experiencing the GRUB Black/Blank screen. I just don't know what else to try...
1. I've changed the kernel boot options, i.e. nomodeset
2. I've toggled the GRUB_GFXMODE=640x680 line
3. I've remembered GRUB-UPDATE
4. I can get into GRUB menu using SHIFT at bootup, messing around with settings and CLI there
5. I started with default nvidia drivers (not good), and then installed nvidia-current - that works better.
6. At the blank screen, I can hit ALT-F1 into console/tty fine.
7. If I use nosplash --verbose, I get a long wait with a blank screen, then the last bits of the bootup log and the login prompt.
8. And stuff I've forgot I've done....
Now what I really can't understand is that I have XBMC installed AND working beautifully. I can set XBMC to autorun with no trouble at all. It's just the period between bios and XBMC that it all goes dark. When I quit XBMC, I get a blinking cursor, which I can F1 to the console. What is it with GRUB??? What am I missing? Why is this so difficult? I COULD live with it, but its just not right, and I want to get it right.
During the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!
HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies View RelatedApology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies View RelatedI have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors. I have two nvidia Fx3500 card in the machine. I have tried the 173, 185 and 190 driver - same thing.
View 2 Replies View RelatedAfter installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies View Relatedthis is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
Running gnome under Ubuntu Lucid
$ env | grep TERM
TERM=xterm
COLORTERM=gnome-terminal
I had to edit both my .muttrc and my vim colorscheme to change the background color from black to none in order to get a proper black background (or, more accurately, to retain the terminal's default black background). Setting it to black resulted in a dark grey background. This only happens with gnome-terminal; konsole, xterm and rxvt are fine.
When I hoover over toolbar menu entries like "System" then currently tooltips (with black background) appear like. "Change system appearance and behaviour, How can I disable these tooltips (for the standard Ubuntu menues only, if possible) ?
View 3 Replies View Related10.04 was working fine till one day I boot up, and there's a weird grey screen. I hear login sound, but nothing is displayed on the screen, it just goes grey with weird shapes and sometimes color stripes. Sort of like grey screen of death...
I thought I would recover my nvidia drivers, but I get the same grey screen when booting from Live CD also. Even from ubuntu recovery remix. Ubuntu Live CD launches, I get a menu, but when it starts to boot, grey screen again.
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View Related*i tried to remove it from Ubuntu software center(same for other apps)
*sudo apt-get remove nvidia-glx
*sudo sh NVIDIA* --uninstall
but it's still there!!, im using Ubuntu 10.04
I recently installed ubuntu 11.04 on my computer and all had been going good except for this little snag.here's the thing :whenever i try to install something using the software center, the file doesn't get downloaded and the progress bar says "applying changes" which obviously goes on for infinity.I read somewhere that another guy had been experiencing similar problems after installing "ubuntu restricted extras" (codecs) and he solved it by uninstalling the codecs.I noticed that even my last successful install was those codecs.problem is, my s/w center doesn't even uninstall them.i don't know any other way to install apps nor can i figure out how to reinstall s/w center.
View 1 Replies View Relatedwe installed Ubuntu Server on a VPS machine then installed VPS desktop after reading this tut markus.revti.com/2009/08/installing-vnc-remote-desktop-on-ubuntu-linux-vps. I'm able to connect to the VPS but all i see is a grey screen.
View 1 Replies View RelatedI've been messing around to try and play runescape (Java based) on my laptop. I run Lucid Lynx (in dualboot with vista) and have Java installed. Now I'm trying to get Runescape to work so I have even more reason to ban Vista completely. So I installed Java, and tried in firefox (3.6.6). It loads the log in, I log in, but then I get a grey screen with "applet started" in the status bar but nothing more.
When that didn't work I did some googling and tried it with SeaMonkey(2.0.4) - same result. Would another browser help or is there something else wrong?
I am trying to install on my Powerbook G4 version 9.04. IT went well and I rebooted it boots up and appears to be loading... In fact says "Loading, please wait"
But the screen begins slowly to fade to white until I can't see anything.
There is one error that might be related I noticed "Radeonfb invalid rom contents".
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedWhen I close my laptop and open it the screen become grey and blotchy with almost an argyle pattern. This has only started happening after I configured the usb ports to work in my VM. My startup screen also says something about a usb problem, and S for skip and M to manually fix it but I have had no problems with my usb. Oh except for my computer won't start
View 2 Replies View RelatedWhen I am using flash a lot of times it will just display a grey screen or just stops. I wanted to use Turbotax today but I can not because of this.
Opensuse 11.3
Firefox 3.6.13
Shockwave flash 10.1 r102 (this is what it says under add-ons)
when I look for flash programs installed in Yast I get two things
flash-player 10.1.102.64-0.2.1
pullin-flash-player 11.3.1-2.1.1
I just installed Moonlight but except for the clock that starts running, buffering and connecting to the video server nothing else works.The screen stays grey and there is no sound. I thought it might work when I install Java applet, but also that doesn't fix.
View 1 Replies View RelatedAfter you install and uninstall kde4, okular shows me pdf in blank
View 9 Replies View RelatedI just tried installing OpenSUSE 11.1 onto my Playstation 3. I installed the otheros.bld fine (which I downloaded via a link provided on the OpenSUSE website). I then inserted my 32-bit Gnome CD for installation and restarted my system. Then on startup, a blue/grey screen appears. Here are the links to the screenshot (sorry for poor quality):
[Full Screen]
[url]
[Top Half]
[url]
[Bottom Half]
[url]
As you can see, the only option is for me to select the gameboot, which obviously takes me back to the Playstation XMB. There are keys at the bottom of the screen, but this is only to change the resolution. So I have no option to install the OS.
Does anybody know why this screen appears and have any ideas on how I can get around this problem to install SUSE onto my Playstation?