I have a TV Card from K-World. So i searched many applications for TV featuring MythTV , Zapping but they did not show any video/sound. I Found TVTime and it was okay , but it didn't show sound.
View 2 RepliesAfter updating from these repositories
Code:
#### Debian Backports - [URL]
deb [URL] squeeze-backports main
#### Debian Multimedia - [URL]
## Run this command: apt-get update && apt-get install debian-multimedia-keyring && apt-get update
deb [URL] stable main non-free
#### Google Linux Software Repositories - [URL]
## Run this command: wget -q -O - [URL] | apt-key add -
deb [URL] stable non-free main
#### Google Linux Software Repositories (Testing) - [URL]
## Run this command: wget -q -O - [URL] | apt-key add -
deb [URL] testing non-free
#### Skype - [URL]
## Run this command: gpg --keyserver pgp.mit.edu --recv-keys 0xd66b746e && gpg --export --armor 0xd66b746e | apt-key add -
deb [URL] stable non-free
#### VirtualBox - [URL]
## Run this command: wget -q [URL] -O- | apt-key add -
deb [URL] squeeze contrib
#### Wine - [URL]
## Run this command: wget -O - [URL] | apt-key add -
VLC started to playing only the audio and not the video, I tried setting the video preferences but all video outputs didn't work. How do I get my video back.
I migrated back from Maverick because I couldn't get Tvtime to work because /dev/mixer is no longer created in 10.10 so no volume control from within tvtime. I'm now back to 10.04. The issue that I'm having is that I have 4 devices that show up as /dev/mixer, /dev/mixer1,/dev/mixer2 and /dev/mixer3. I need to have tvtime use the mixer associated with my soundblaster audigy card.
whenever I reboot, the order of these devices changes. Sometimes the soundblaster is assoaciated with /dev/mixer , sometimes it's /dev/mixer2 etc. Is there a way to ensure that the devices are always in the same place/order? On a related note, sometimes my usb webcam is video1 other times it's video0 , this also causes problems with tvtime. How can I ensure that my system is the same after each boot? I tried dev rules but couldn't get them to work properly.
When I run tvtime with the desktop effects enabled Xorg, compiz and tvtime use a lot of cpu. It's even worse with tvtime in full screen. This doesn't happen with the desktop effects off or when I use vlc for example. The system is a 3GHz P4 Prescott, 1.7GB Ram, Nvidia FX5500. I'm running 11.3 with the nvidia video driver (173.14.27).
View 2 Replies View RelatedHow to get sound out of tvtime time in ubuntu 10.10? If so have you also been able to get the internal volume control to work. I just amazed that ubuntu devs would just shut off this functionality that affects much more the just tvtime and not offer a viable alternative. Is there an alternative? I haven't been able to find after a week or so of googling.
View 7 Replies View RelatedI have winfast tv200 expert tv-tuner. I am using TvTime to watch tv through it. verything is working fine except that sound continues to come even after i quit tvtime. is there any solution for it?
View 3 Replies View RelatedI have an issue with TVTIME's sound, its scratchy , the sound isn't clear. i can hear the sound & even understand, but there is a scratchy noise along with it,I didn't used to get it in ubuntu9.10 & 9.04,i don't have any issues with windows xp even,the tv tuner card is pinnacle PCTV version 5.
INTEL PENTIUM DUAL CORE 2.5GHz,(1GB)EACH 2 RAMS,ASUS INTEL G31 CHIPSET MOTHERBOARD, I have dual boot with WIN XP on another hard drive, xp doesn't give me problems regarding the TV tuner card, i have used UBUNTU 9.04 & 9.10 , they never gave me problems. I switched to openSUSE 11.2 because the internet used to be slow on UBUNTU 9.10. INTERNET on openSUSE 11.2 is working like wonders for me as i use 3G internet from a NOKIA N73 MOBILE.ubuntu was was a touch slower on the internet side. i don't want to shift back to ubuntu ,UBUNTU 10.04 release is just 9 days away. FYI - xine,amarok,vlc,mplayer,smplayer all work fine without any issues,
I have installed Tvtime and XawTv applications and I am currently trying to configure both these applications to detect my tv tuner card (pixelview play tv pro with conexant cx2388 chipset). configure both video and audio with channel scan for my tv tuner card?
View 2 Replies View RelatedI used to watch and record TV in Vista and Win7 with a SAA7134 capture card, and all worked fine. Using TVTime in Ubuntu 10.10 64bit (no upgrade but fresh install, everything up-to-date), I get picture but no sound. Instead I get this error message when running TVTime from the terminal: Can't open device /dev/mixer, mixer volume and mute unavailable.Using lspci in terminal lists the card as following:
Code:
02:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
And dmesg outputs this:
Code:
[ 16.078404] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 16.078458] alloc irq_desc for 17 on node -1
[ 16.078460] alloc kstat_irqs on node -1[code]....
Being rather new to Linux (oh great, another newbie ) I don't know what additional info you might need, but I'm more than happy to post everything neededd - provided you tell me how to get that info.
I have a Dazzle USB Capture Device, and I can't use it because I can't find any good Video Capture Software. The sound lags in TVTime, and I can't get any Video Signal on XawTV. If anyone could direct me to some good software (or possibly help me fix the problem with my previous programs),
View 6 Replies View RelatedTo get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
I can not see incoming video on Skype.
Okay, so I have Skype installed, and it has worked fine in the past. I have been able to chat with my girlfriend on it. We can see each other and both talk. I haven't used it in probably 3 or 4 months. I tried to use it last night and for some reason, I could not see her on the video. It would just show up as a white box where the video should be. She could see me, and we could hear each other. I already had her test with somebody else to check if her video output was okay, and it worked just fine.
I read something that Cairo Dock could somehow be affecting it, but I haven't tested this theory. I can't see how the two could be related.
i run ubuntu 10.10 on a 3.5ghz quad core, 4gb ram.
I had the idea to make an inranet for me and my housemates.... i have an extensive video collection mostly in .avi and .mkv. i would like to make a page which diplays this video and lets you select from a playlist/browse the directory, howeve i didn't really want to have to recode all the video to flv.
is there a way i can do with VLC? i have looked about and the vlcwebplayer just looks like another flash player... does it support VLC recoding on the fly? or am i missing *something*
My vlc player does not show video of a movie but plays audio of that file crystal clear !! See the attached screenshot!!
I uninstalled completely and reinstalled but in vain!
How do I get my X300 ATI PCIE card to show in Hardware Drivers so the driver will work? I installed the drivers from the Ubuntu software Center. I am using Ubuntu 10.4.
View 7 Replies View Relatedwhen I run some video it did not show me image. I can only listen sound. When I was looking on google I found out that my problem could solve by using "X11 video", but it does not help me. Here is my error statement:
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Warning: call to signal(13, 0x1)
[0x95a98fc] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Blocked: call to setlocale(6, "")
Blocked: call to sigaction(17, 0xb700a0d4, 0xb700a048)
[Code]...
So my Microsoft Lifecam NX-3000 used to work with 9.04, but I can't seem to get anything from it now (Xubuntu 9.10). It still shows up fine when i enter lsusb, but it won't show up as a video device anywhere else. I have faith that this bug is a simple fix for someone who knows what they're doing, but unfortunately I don't. If it's relevant this is on my aging Toshiba Satellite.
View 4 Replies View Relatedafter upgrading to 10.10 I ran into one problem. Upgraded some while ago (when released), then noticed problem but now it starts to really bother me. Unfortunately didn't find any solution yet. I'm 100% sure I didn't have such problem during upgrades starting from Karmic till Lucid.
The problem is with any version of wine (it's not wine issue, i think) and MetaTrader4 on it. Not typical VNC issue The problem is that it works almost normally, but don't show some lines on screen. Take a look at screenshot attached. I found in wine proposal to disable xrender: [URL]... it really helps with that issue, but then I ran in typical AplhaBlend problem and no visible icons in toolbars. So I have to choose to see normal icons in toolbars (see 2nd screenshot) or to see correct chart
Little bit about my laptop:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Limited. Device 13f8
Flags: bus master, fast devsel, latency 0, IRQ 45
[Code]...
I get the following information : "Your video driver doesn't support the requested video format" while trying to use video in Ekiga, using 10.04
View 9 Replies View RelatedFirefox doesn't show subtitles from a video source.What do I do?
View 2 Replies View RelatedI am wondering how i would do this using VLC (i want both video and audio to be recored),
i see this RTSP Protocol people use but no idea how to use this for a website thats going to have a live show on.
By the way the thing i want to record will be here http://e3.nintendo.com.
Would it be rtsp://e3.nintendo.com?
hopefully thats a link that can be recorded...right?
the reason i want to record this is because i got a test i have to take... i gotta stay for like 2 hours.
After installing proprietary graphics drivers for AMD A-50 APU graphics performance has been greatly increased. But two new problems have come up.
1. While playing video files clicking menus doesn't show anything, the video forcibly overrides the menus.
2. Videos always take the focus over other windows and applications.
For example, see the attached screenshot where actually terminal should come to the focus, but the video is overriding it.
I am trying to demux a set of VOB's from a DVD. I want to be able to extract any video/audio/subtitle/closed caption stream to a raw file. Then I want to wrap the streams that I want into an MKV file. (Probably the video, best quality audio, and all of the subtitles. But who knows, maybe all the streams...) To extract the mpeg2 video from the VOB (which I pulled off the DVD using vobcopy) I am trying to use this command:
Code:
$ ffmpeg -i VTS_01_1.VOB -an -sn -vcodec copy -f rawvideo output.mpeg
The problem is, that when I open output.mpeg in something like VLC, the subtitles are still there. I can turn them on/off, but I don't understand why they are there. FYI: if I do -f mpeg2video, I get the same exact output, checked with an md5sum.
Here is a sample output:
Code:
$ ffmpeg -i VTS_01_1.VOB -an -sn -vcodec copy -f rawvideo output.mpeg
FFmpeg version UNKNOWN, Copyright (c) 2000-2010 Fabrice Bellard, et al.
built on Jan 10 2010 17:47:18 with gcc 4.4.2 20091208 (prerelease)configuration: --prefix=/usr --enable-gpl --enable-libmp3lame --enable-libvorbis --enable-libfaac --enable-libfaad --enable-libxvid --enable-libx264 --enable-libtheora --enable-postproc --enable-shared --enable-pthreads --enable-x11grab --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-version3 --enable-nonfree
libavutil 50. 7. 0 / 50. 7. 0
libavcodec 52.45. 0 / 52.45. 0
libavformat 52.46. 0 / 52.46. 0
libavdevice 52. 2. 0 / 52. 2. 0
libswscale 0. 8. 0 / 0. 8. 0
libpostproc 51. 2. 0 / 51. 2. 0
[mpeg @ 0x824b390]max_analyze_duration reached
Input #0, mpeg, from 'VTS_01_1.VOB':
Duration: 00:22:22.22, start: 0.045500, bitrate: 6399 kb/s
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 7500 kb/s, 27.48 fps, 59.94 tbr, 90k tbn, 59.94 tbc
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s
Stream #0.2[0x81]: Audio: ac3, 0 channels
Output #0, rawvideo, to 'output.mpeg':
Stream #0.0: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], q=2-31, 7500 kb/s, 90k tbn, 29.97 tbc
Stream mapping:
Stream #0.0 -> #0.0
Press [q] to stop encoding
frame=32731 fps=428 q=-1.0 Lsize= 878592kB time=1361.26 bitrate=5287.3kbits/s
video:878592kB audio:0kB global headers:0kB muxing overhead 0.000000%
I'm especially curious about that "max_analyze_duration reached" line.
I have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
complete noob, please forgive me if this has been covered a million times, butMy asus F9e laptop, shows picture ok on my plasma tv, but the sound doesn't - I'm running ubuntu 10.10
View 4 Replies View RelatedI have a Geforce 9300 GS installed in my machine I am using 64 bit Gnome with a 64 bit system I downloaded this: Now my video won't show any effects and the Nvidia card won't work? This doesn't make any sense. Frustration to the max. I should have stayed with Fedora 10 at least it worked with downloadable drivers.
View 14 Replies View RelatedI guess it is the setting of the Opensuse, as i have tried different players, e.g SMPlayer, VLC adn Xine, all show blue dots on the player's screen.
View 3 Replies View Relatedwhen I try to export a song from Hydrogen to WAV or MIDI they export, but when I try to listen to the exported file it doesn't show any sound or anything. I have Ubuntu 10.10 with Realtek AC '97 embedded sound card, the sound work perfect in the machine, actually it works perfect on the program itself but in the exporting, it doesn't work, what should I do to fix this problem?
View 1 Replies View Relatedactual GUI program, which allows to create slide show movie with sound?
View 14 Replies View Related