So my Microsoft Lifecam NX-3000 used to work with 9.04, but I can't seem to get anything from it now (Xubuntu 9.10). It still shows up fine when i enter lsusb, but it won't show up as a video device anywhere else. I have faith that this bug is a simple fix for someone who knows what they're doing, but unfortunately I don't. If it's relevant this is on my aging Toshiba Satellite.
View 4 RepliesI get the following information : "Your video driver doesn't support the requested video format" while trying to use video in Ekiga, using 10.04
View 9 Replies View RelatedI have a server with RHEL 5. I have bought a HDD and put it into a USB box. Then I plug it to my server by USB cable. I want to mount it but the fdisk -l command don't show external usb device.
View 7 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
For some reason Cheese works for the 1st time when I launch the application fresh but after I use it and I close the application, the next time I go to use it, it doesn't show any video from my web cam. I can see the web cam turn on and it activates the flash LED however I don't see any video. I reboot my Ubuntu PC and it works fine the next time but I have to always reboot my PC and it sucks.
View 5 Replies View RelatedI just recently purchased a GTMax Flexible 12 Mega Pixel High Resolution w/ 4 LED Light & Microphone USB PC Webcam - Black from amazon.com, and attempted to use it in Ubuntu 8.10, but can't get it to work. The LEDs come on when I plug it into my laptop's usb port, but no video. I've tested it with Cheese Webcam Booth, and also an external website, but it doesn't work.Of course, though, I'm not entirely sure its really the webcam, since Cheese Webcam Booth seems to be turning on my built-in laptop webcam which might be interfering with it, and also the tokbox widget in the website doesn't completely load anyway in ubuntu, webcam or no, so I'm thinking that maybe its only Cheese and tokbox which are not working.
My OS is Ubuntu 8.10 64 bit. Cheese Webcam Booth also does not work with my interal cam, though it turns it on, and I've confirmed it (i.e. cheese + internal webcam) does work in my ubuntu 9.10 32 bit which is installed in a multiboot on the same computer.
I would like to get these problems resolved, ASAP, as I need to have my webcam (at least one of them, preferably both) working in ubuntu 8.10, for that's the OS I use the most often.I will note that my laptop is a Dell Studio 1535, and since I've installed Ubuntu 8.10 on it, I've had a number of other hardware issues with it on ubuntu, but I've been able to get most of them resolved a long time ago, but the webcam thing is one that I haven't got to work since I first installed ubuntu (which was God knows how long ago).
I'm having here annoying "problem" with my webcamera. Everytime I want to use it as a microphone it needs to be switched manually in sound settings menu. It's not a big deal but I would really rather let it be switched automatically like plug and play or something like that.
View 8 Replies View RelatedWhen my netbook has an extended screen, using an external monitor, all of the panels stay on the netbook, not the big monitor. When I connect an external monitor, I want to use it as my primary screen. I only really intend to use the netbook screen for skype calls (so I am looking into the webcam, and not away from it) since it is so small. I wish the secondary screen to be the netbook, not the external monitor. How can I do this?
View 1 Replies View RelatedI was just wondering, is there any way to play a video/animation as a WebCam? I'd like to use that with Skype or Chatroulette.com etc
View 7 Replies View RelatedI'm having a problem using cheese to record video from my webcam. The image is extremely slow to update. Especially when there is lots of movement it sometimes freezes for about a second.
When I use the webcam in Skype it works fine. Does anybody have a clue what might cause this and better yet, how to fix it.
I have a Sager NP5797 running Lucid (32-bit) with a BisonCam NB Pro (V4L2) webcam on /dev/video0 In Flash (like [URL]), everything works great. My video appears to both myself and others, and I see incoming video. (I am using the 10.1 RC libflashplugin.so, downloaded from Adobe's site) But in applications like Cheese, Skype, etc., I get a big blank white box where video should be: Cheese (as well as every other app I try) sees the camera on /dev/video0:
In Skype, the person I am calling sees my video perfectly fine. So my camera is "working" and sending video. But I cannot see my video, nor can I see their incoming video. It's all a big white box just like the one in Cheese in the shot above. Taking the other person out of the equation, when I go to use the "test" in Skype, it's just a blank white box too. The video will not draw for me.
Again, I do see video in Flash-based web apps that use the webcam. And other people are seeing my video. But webcam video (both mine and the incoming stream) won't "draw" for me. What makes V4L video not draw? I am using the binary NVIDIA driver for the GTX 280M chip in the laptop, and I am using Compiz. Though I tried turning Compiz off and Cheese still just showed the white box.
I have a Sapphire PC USB webcam. It has a driver cd for Windows and it works fine there. But in Ubuntu 10.04 I get pink, hazy video when I use Cheese.I tried Camorama but in that software I get 'No Video' error.What should I do?
View 3 Replies View RelatedAnybody had any success in getting ffmpeg to work as advertised with video capture from a webcam? I really want to convert the webcam output to VP8 or H264, but apparently ffmpeg can't even capture the webcam with a video4linux device.
Code:
I have a very big image directory: One image per minute, whole a year, captured from a webcam. Now I want to make a video (15 or 24FPS) with all the webcam captures, to see how it changed during this period. I've tried automotion, but it makes a very low quality video, besides it blocks with lots of images. I've also tried dvd-slideshow, but it's not possible to make a more-than-1FPS video.
I also need to change the date in each webcam's images, because they are wrong, so it needed to overlay a little layout with the right date for each image, is that possible to manage within some application? Preferibly shell applications which supports lots of Gb of information (anyway I always could make little videos and then glue them)
I wonder if anyone here has succeeded in streaming the video of a local webcam to the internet? Some research has turned up webcam_server Project Home Page but unfortunately it only supports v4l, not v4l2 and is no longer maintained. It seems to be possible with VLC server, but I'm a bit reluctant, because their repo is said to break other things. I still have 11.1 here.
View 4 Replies View RelatedAny software for Ubuntu that will record video using the built in laptop webcam or a usb webcam. I am looking for something that works by motion detection so it isn't constantly recording. I installed Zoneminder since it was the only thing I could find, but I couldn't get it to work.
View 1 Replies View RelatedVideo was already choppy since upgrade to 10.10, updated my xorg and now webcam is not working and I hear a ringing sound... its a lenovo webcam
system specs:
AMD Athlon II Dual Core M320
Gnome 2.32.0 / Ubuntu 10.10 Maverick
Linux 2.6.35-28 Kernel
ATI Fire GL Driver
Code:
fglrxinfo:
I have a Dell 1300 running Kubuntu 11 and attached is a Logitech Pro 9000 webcam. It works OK - in the sense that Cheese, VLC etc display correctly. I'm trying to set up video streaming for security monitoring - and because the Dell is pretty slow, I need to stream at a low rate of frames/sec to keep a reasonably low cpu utilisation. I've tried various things, but the most successful is the motion package, which I can set up with a new frame each second, which is fine. However, the motion server stops after a seemingly random period with the message ...
[0] Thread 1 - Watchdog timeout, trying to do a graceful restart
[0] httpd - Finishing
[0] httpd Closing
[0] httpd thread exit
[0] Thread 1 - Watchdog timeout, did NOT restart graceful,killing it!
[0] Calling vid_close() from motion_cleanup
[0] Closing video device /dev/video0
Motion hasn't crashed, it's still running. I also get a message in syslog ... uvcvideo: Failed to resubmit video URB (-27)
I use skype and other video chat rooms like tinychat and have alway notice windows user doing cool webcam effects. I want to know if there was a program in ubuntu that would allow this.
View 5 Replies View RelatedI have a vx-6000 and the video and pictures actually works good but there is no sound can you get sound to work and how?
View 2 Replies View RelatedTo get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
I have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
I don't have any sound in my external device (TV). I'm attempting to watch a movie on the VLC player but I can't seem to get the sound to work through my television speakers! They are coming out of my computer speakers just fine though.
View 5 Replies View RelatedMy vlc player does not show video of a movie but plays audio of that file crystal clear !! See the attached screenshot!!
I uninstalled completely and reinstalled but in vain!
I am having problems with ffmpeg. My goal is to capture a video stream from my webcam and feed that into a webcam-capturing program. But to get that to work, I will need ffmpeg to work. I need the following command to work, but I get an error:
Code:
$ ffmpeg -b 100K -an -f video4linux2 -s 320x240 -r 10 -i $device -b 100K -f image2pipe -vcodec mjpeg - | perl -pi -e 's/\xFF\xD8/KIRSLESEP\xFF\xD8/ig'
ffmpeg: relocation error: /usr/lib/libavfilter.so.2: symbol avformat_find_stream_info, version LIBAVFORMAT_53 not defined in file libavformat.so.53 with link time reference
I'm using OpenSUSE-11.4+KDE and have not been able to access my Sansa Express drive. I can pull it up part way, but it acts as read only. I'm not sure what settings I may need to make in the Partitioner to fix this.If I boot into a LiveCD of LinuxMint10-KDE and plug it in it is instantly identified as a "Media Device," and I have access into the MTP section of it I believe.
I prefer using Banshee, but will use Dolphin to manual drop files it I can get the Sansa drive to operate as with Read+Write. I've seen this device listed here at "plug and play" [URL]../HCL:Gadgets#Media_Players
In [URL] I can right-click on a flash video and have the option to access "local settings" under "Settings" to specify configuration for webcam, mic, etc. But in Facebook I need to adjust a setting and the "Setting" option for local config is gray-ed out, I can't access it.
I'm running OpenSUSE 11.4, and I've seen this in GNOME and KDE within Firefox.
I'm new to ubuntu but i do have a basic understanding of programming, but nothing too serious. The reason I am mentioning this is because I have a little project. Currently I use JACK to control the transport of all the aps i use to make music with ardour, hydrogen and rosegarden mainly. I also have an external midi drum machine that I sometimes hook up into the mix via midi in/out, my drum machine (yamaha ry to be exact can send and receive midi data. My question is can I use the transport controls on my external drum machine to control JACK's transport controls? If there is already am app that does something like that, excellent!
View 3 Replies View RelatedI am wondering how i would do this using VLC (i want both video and audio to be recored),
i see this RTSP Protocol people use but no idea how to use this for a website thats going to have a live show on.
By the way the thing i want to record will be here http://e3.nintendo.com.
Would it be rtsp://e3.nintendo.com?
hopefully thats a link that can be recorded...right?
the reason i want to record this is because i got a test i have to take... i gotta stay for like 2 hours.
After installing proprietary graphics drivers for AMD A-50 APU graphics performance has been greatly increased. But two new problems have come up.
1. While playing video files clicking menus doesn't show anything, the video forcibly overrides the menus.
2. Videos always take the focus over other windows and applications.
For example, see the attached screenshot where actually terminal should come to the focus, but the video is overriding it.