Software :: Trying To Demux VOB - Subtitles Show Up In Video Stream
Jan 28, 2010
I am trying to demux a set of VOB's from a DVD. I want to be able to extract any video/audio/subtitle/closed caption stream to a raw file. Then I want to wrap the streams that I want into an MKV file. (Probably the video, best quality audio, and all of the subtitles. But who knows, maybe all the streams...) To extract the mpeg2 video from the VOB (which I pulled off the DVD using vobcopy) I am trying to use this command:
Code:
$ ffmpeg -i VTS_01_1.VOB -an -sn -vcodec copy -f rawvideo output.mpeg
The problem is, that when I open output.mpeg in something like VLC, the subtitles are still there. I can turn them on/off, but I don't understand why they are there. FYI: if I do -f mpeg2video, I get the same exact output, checked with an md5sum.
I'm using Kaffeine 1.0-svn3 from Packman repo on openSuse 11.2 with KDE 4.3.5. In Kaffeine, I can not find the menu where I can choose the subtitles. (I want to watch an avi-file with a separate subtitle-file in srt format). With openSuse 11.0, KDE 3.5.8. and an older version of Kaffeine, there was a possibility to select subtitle files (srt).
Some DVDs do often have some scenes with foreign languages translated by forced subtitles.Mplayer gives the possibility to enable or disable subtitles.But if enabled you see the whole movie subtitles unnecessarily.If disabled there are no subtitles altough they were necessary translating some scenes with foreign languages.
i'm currently subtitling a jpop music video and i was wondering:how do you save the video with the subtitles still on it? i'm half way through subbing, and i want to upload the video to videos with the subtitles attached but.how? i can only save them as separate files, and not singular.
I'm sure this is easy to do. I want to create one of those "Hitler" internet meme things for a presentation I'm doing at work, which of course, involves adding custom subtitles to a video. Now, I've found the tutorial that says how to use the right filter with avidemux, but I was wondering what the easiest way is to create the file for that filter to read. Is it just a matter of manually writing it up in my fav text editor? something that looks like
startTime,duration,text
(one per line) then I'd rather just textedit it manually, but if it's something complicated, then I should use some software to do it...
I have just upgraded to Lucid. While trying to watch movies (i have installed all the requisite plugins), I encountered certain problems. The following is what I noticed after some thorough search into the issue:
1. Suppose one goes to the location of a video file, say, /Home/Videos/Sound of Music.xyz , double clicking the file would open the movie player (Totem) but one would not be able to see any video, though sound is coming.
2. Sometimes, on entering the fullscreen the video started from double clicking the file is visible, but leaving full screen, it is lost again. This however doesnt happen in all cases, because mostly one sees no video if through double-clicking the file.
3. The same operation of playing, if done through the player (by /Movie/Open.. or by Adding a video file in the playlist) happens quite properly.
4. A .mkv file doesnt play for long, since the player crashes.
5. Subtitles are not detected, even after putting the settings on automatic loading of subtitles (/Edit/Preferences/Automatically.....)
I have set the hotkey for "Very short backwards jump" and "Very short forward jump" to "Left" and "Right" respectively, and yet pressing the left and right arrow key does not work. Plus when I play the video in fullscreen the subtitles look pixelated.
I wanted to see the current video stream of oil leak in the gulf but when I go to the page the video is black. When I click on the video it give the error message Quote:
An Error Occurred: Could not write to resource. I am not sure what that means or how to fix it.
Can anyone recommend open software that will allow me to edit videos and add subtitles? I have footage in one language and would like to have subtitles for people that are fluent in another language.popcorn for the people watching my videos
I have problem with VLC player. The problem, from the image below, appears whenever I open video file. I click Ok, and a everything is ok, until I jump to another time sequence, when sound and subtitles disappear.
I followed the instruction in the cheese help tutorial. The changes inGStreamer to produce the live stream in cheese "try changing from xvimagesinkto ximagesink or vice-versa.", only make both fail if changed to xvimagesink.As suggested here it goes the log...
Cheese 2.28.1 Probing devices with HAL... Found device 041e:4051, getting capabilities...
Is there any way to check if a url points to a streaming video file or not programmatically. For example with this url : [URL].. I should get TRUE and with the url : [URL]..should return FALSE.
Program in any language will be okay but it ll be good if its Perl or PHP or Python or JAVA, JavaScript or SHELL script. I am working on LINUX. (note: i m not going to check with .....'s just for example's sake i ve used .....
There is an udp video stream accessible only on the local network, but I need to access it outside of the network. I have Linux machine (multiple actually) with root access.There is a small utility that makes the stream accessible on the local machine on port 1234.
./ping -h streamserver -p 1234
If I run it I can access the stream using vlc or mplayer.
mplayer udp://@:1234 vlc udp://@:1234
Now, I'm trying to create a port foward from my remote machine and access the port, but it is failing.
Is there a way that I can specify the height and with of the stream on the command line? From what I read, it looks like a #transcoder option would work, but I cant seem to figure it out. The above command is working, and I can view the stream, but it's extremely slow, and continuously freezes and buffers. My thinking is that if I can reduce the scale of the video.
I've looked around and found some programs avaialable in linux to stream video. I'm looking to stream to my PS3 but would like to be able to stream to my other computers. I would like the program to transcode too. I'm really looking for opinions on which one to use. I tried PS3 Media Server, it worked fine but it tended to be a resource hog. Also, I had trouble seeing it on other computers.
I'm running Debian Squeeze on an old AMD 3000+ but that will be updated here in the future. This is all internal personal network. Most computers will be on wired lan.Opinions? Ease of configuration, ease of use, stablilty?
I am working in Fedora FC11 with: Mozilla/5.0 (X11; U; Linux i686; nl; rv:1.9.1.5) Gecko/20091105 Fedora/3.5.5-1.fc11 Firefox/3.5.5
In the following site I cannot see the video stream:[URL]...Choosing "TW1 Livestream" should gives a video stream, but it gives a black screen. Clicking on that black windows gives a text: Waiting for video.
A German text shows that the actual Version from Windows Media Players should be installed.In the past I could see video there, but after an upgrade it does not work any more.Looking in aboutlugins I see following Windows Media Player plugins:
Windows Media Player Plug-in Bestandsnaam: gecko-mediaplayer-wmp.so Gecko Media Player 0.9.8 Video Player Plug-in for QuickTime, RealPlayer and Windows Media Player streams using MPlayer QuickTime Plug-in 7.4.5 Bestandsnaam: gecko-mediaplayer-qt.so Gecko Media Player 0.9.8
Video Player Plug-in for QuickTime, RealPlayer and Windows Media Player streams using MPlayer
I'm trying to us ushare to stream music and video to my 360. I have ushare setup and my 360 sees ushare but none of the files I'm trying to stream. When I run ushare -x it only sees the two folders I'm sharing and none of the files.
I wonder if anyone here has succeeded in streaming the video of a local webcam to the internet? Some research has turned up webcam_server Project Home Page but unfortunately it only supports v4l, not v4l2 and is no longer maintained. It seems to be possible with VLC server, but I'm a bit reluctant, because their repo is said to break other things. I still have 11.1 here.
I'm finding it very difficult to play a video stream of .mov format. The Totem Media player gives me an error : GstDecodeBin2: This appears to be a text file
Even Real Media Player for linux is giving me an error: General error: HXR_CORRUPT_FILE (0x80040091)
Even VLC hangs on trying to play it.
(BTW the file isnt corrupt though, its apple's last night's iphone press conference from their official website - [URL])
I'm looking for software to capture a flash stream that uses rtmp protocol? the normal flash download plugins for firefox won't work and i'm not finding anything on the web for free options. from what i've read about it, it's a proprietary protocol with adobe and not many people now how it works. anyone here know anything that could save the files or grab the stream?
I am trying to stream a video between two Ubuntu 9.04 stations using GStreamer. The following code is run on the emitting machine: Code: gst-launch videotestsrc ! queue ! ffenc_mjpeg ! udpsink port=5000 host=192.168.1.100 -v And the following on the receiving machine with IP 192.168.1.100: Code: gst-launch udpsrc port=5000 caps="image/jpeg, width=320, height=240, framerate=30/1" ! queue ! ffdec_mjpeg ! ximagesink sync=true -v Whatever the order I'm running them (emit first or receive first), I'm getting the following error once both are connected (I can see the Ethernet lights blinking):
ERROR*: element /GstPipelineipeline0/GstUDPSrc:udpsrc0*: internal error data flow. gstbasesrc.c(245: gst_base_src_loop (): /GstPipelineipeline/GstUDPSrc:udpsrc0: streaming task paused, reason not-negotiated (-4) Execution ended after 3191625000 ns.
This is my first time installing zoneminder, just downloaded the latest version and trying it on my slackware 12 box. I tested the card I ordered with xawtv and was able to see video just fine.
Zoneminder seems to start fine but I can't get it to stream video.
[URL]
That's what I get when I try to view. I'm not sure if there is a log file I can check to see if there is an error.
How do I get samba shares to work in Dolphin without having to download the entire file before VLC loads it? I just want to watch a movie from my samba share, and it won't just stream the file.
I've tried installing Smb4k from slackbuild.org, but it doesn't seem to be working correctly either.
I am going to purchase an IC-3030 camera. I want to access the video stream and download it as it happens, but not by using the Edimax-supplied video utility, as the computer will be running Linux. I am unable to find in the user manual whether I can access the stream directly or not. How can I access the video stream directly from an Edimax IC-3030 camera?
