OpenSUSE Multimedia :: TVTIME Bad (scratchy) Sound - Isn't Clear
Apr 20, 2010
I have an issue with TVTIME's sound, its scratchy , the sound isn't clear. i can hear the sound & even understand, but there is a scratchy noise along with it,I didn't used to get it in ubuntu9.10 & 9.04,i don't have any issues with windows xp even,the tv tuner card is pinnacle PCTV version 5.
INTEL PENTIUM DUAL CORE 2.5GHz,(1GB)EACH 2 RAMS,ASUS INTEL G31 CHIPSET MOTHERBOARD, I have dual boot with WIN XP on another hard drive, xp doesn't give me problems regarding the TV tuner card, i have used UBUNTU 9.04 & 9.10 , they never gave me problems. I switched to openSUSE 11.2 because the internet used to be slow on UBUNTU 9.10. INTERNET on openSUSE 11.2 is working like wonders for me as i use 3G internet from a NOKIA N73 MOBILE.ubuntu was was a touch slower on the internet side. i don't want to shift back to ubuntu ,UBUNTU 10.04 release is just 9 days away. FYI - xine,amarok,vlc,mplayer,smplayer all work fine without any issues,
View 1 Replies
ADVERTISEMENT
Apr 13, 2010
It seems like it's mostly an issue with playing games. When I play certain 3D games, the audio may work for a little while, but will start getting scratching or full of static. Some times it's a lot, and other times it's just a little bit. Most times, the sound in the game will stop working after a short moment of static/scratchy sound. Then I am left with complete silence.I've seen on other posts that PCM volume may be turned up all the way. I wasn't sure what PCM was, but in the volume controls, I saw that you could adjust each individual application's volume. I assumed that this was PCM, as the game's volume was all the way up.I turned it down some, and I still got some static in the sound, and the sound still disappeared completely after a short time.
View 3 Replies
View Related
May 27, 2010
I am using 10.04 64-bit on a GA-770TA-UD3 motherboard with onboard Realtek ALC888 audio chip. I'm having scratchy sound with games like World of goo and Penumbra. I solved the problem for Penumbra by selecting OSS option instead of ALSA from the settings menu but I'dont have that option in World of goo (and many other games).I have no problem with video or audio files. The board is [URL]..
View 1 Replies
View Related
Nov 2, 2010
I have winfast tv200 expert tv-tuner. I am using TvTime to watch tv through it. verything is working fine except that sound continues to come even after i quit tvtime. is there any solution for it?
View 3 Replies
View Related
Jul 16, 2010
When I run tvtime with the desktop effects enabled Xorg, compiz and tvtime use a lot of cpu. It's even worse with tvtime in full screen. This doesn't happen with the desktop effects off or when I use vlc for example. The system is a 3GHz P4 Prescott, 1.7GB Ram, Nvidia FX5500. I'm running 11.3 with the nvidia video driver (173.14.27).
View 2 Replies
View Related
Jun 11, 2010
have problem to get clear sound through my 5.1 speakers. I can hear out sound from evry speaker, but it's kind of shrilly.
View 8 Replies
View Related
Jan 10, 2011
I used to watch and record TV in Vista and Win7 with a SAA7134 capture card, and all worked fine. Using TVTime in Ubuntu 10.10 64bit (no upgrade but fresh install, everything up-to-date), I get picture but no sound. Instead I get this error message when running TVTime from the terminal: Can't open device /dev/mixer, mixer volume and mute unavailable.Using lspci in terminal lists the card as following:
Code:
02:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
And dmesg outputs this:
Code:
[ 16.078404] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 16.078458] alloc irq_desc for 17 on node -1
[ 16.078460] alloc kstat_irqs on node -1[code]....
Being rather new to Linux (oh great, another newbie ) I don't know what additional info you might need, but I'm more than happy to post everything neededd - provided you tell me how to get that info.
View 3 Replies
View Related
Jan 19, 2011
I've recently changed motherboards from a gigabyte ma785gmt-ud2h to an ASUS M488T-M/USB3. For comparative purposes, I have done a fresh install of both Win 7 and Fedora 14 - everything works well except that the sound in Fedora is very scratchy and I cannot get the volume or clearness I was used to with the previous board.
Is there a driver which will fix this problem, or is this a quirk peculiar to ASUS boards? (The sound in Win 7 is crystal clear, by the way - I'm starting to think that the board was designed with Win 7 in mind.)
View 5 Replies
View Related
May 25, 2010
I just bought an Audigy SE sound card. It sounds fine for regular playback, but, for recording through Audacity, all I hear is this scratchy/distorted sound like it's turned all the way up. I tried lowering the volumes in alsamixer, but, that didn't work. Wanted to know if anyone had a solution before I send it back.
View 6 Replies
View Related
Jun 2, 2010
I just installed 10.04 (64 bit, in case that matters) last night. I have onboard sound and video, and they working fine until I installed the proprietary drivers for my video card. When this happened, my sound got all fuzzy/scratchy. I can go back into the Hardware Drivers and remove the proprietary ones and then the sound is fine. My problem is that I want to use better drivers for my video, but not at the sacrifice of sound quality. I went to the nVidia site, and they have drivers from April 24, 2010 on there, but there's a couple problems with that. I don't know if they are any different than the ones I already installed through Ubuntu, and I don't know if they will cause the same issue. Since I'm fairly new to linux, installing the drivers from the .run file seems like more of an undertaking than I want to do right now, and I don't want to mess anything up and not be able to revert my changes. With the Hardware Drivers utility, I can easily remove the drivers and the sound works, but I don't know if that will be the case.
I have an ECS GeForce7050M-M motherboard. I can't really find specifics for chipsets, but the nVidia site detected a GeForce GTX 480 for video. If I recall correctly, my audio is some Realtek HD thing. I had this same problem when I tried 9.04, but I didn't narrow it down to the nVidia drivers at the time.
View 6 Replies
View Related
Oct 5, 2010
I migrated back from Maverick because I couldn't get Tvtime to work because /dev/mixer is no longer created in 10.10 so no volume control from within tvtime. I'm now back to 10.04. The issue that I'm having is that I have 4 devices that show up as /dev/mixer, /dev/mixer1,/dev/mixer2 and /dev/mixer3. I need to have tvtime use the mixer associated with my soundblaster audigy card.
whenever I reboot, the order of these devices changes. Sometimes the soundblaster is assoaciated with /dev/mixer , sometimes it's /dev/mixer2 etc. Is there a way to ensure that the devices are always in the same place/order? On a related note, sometimes my usb webcam is video1 other times it's video0 , this also causes problems with tvtime. How can I ensure that my system is the same after each boot? I tried dev rules but couldn't get them to work properly.
View 3 Replies
View Related
Oct 2, 2010
I have a TV Card from K-World. So i searched many applications for TV featuring MythTV , Zapping but they did not show any video/sound. I Found TVTime and it was okay , but it didn't show sound.
View 2 Replies
View Related
Oct 18, 2010
How to get sound out of tvtime time in ubuntu 10.10? If so have you also been able to get the internal volume control to work. I just amazed that ubuntu devs would just shut off this functionality that affects much more the just tvtime and not offer a viable alternative. Is there an alternative? I haven't been able to find after a week or so of googling.
View 7 Replies
View Related
May 4, 2010
setting up tvtime for Conexant Cx8800 based TV tuner cards in Ubuntu 10.04?
I tried all the combinations by modifying the tvtime.xml configuration file but I still get only a Blue screen and no audio.
I also tried with xawtv and the result was same. I have given below the output of xawtv -hwscan.
Code:
abhilash@ubuntu:~$ xawtv -hwscan
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.32-21-generic)
looking for available devices
port 88-88
[Code]....
View 1 Replies
View Related
May 7, 2010
I installed 10.04 from scratch over 9.04 ,keeping /Home. Tvtime no longer works.I unistalled it completly and installed again ,with no results.
View 9 Replies
View Related
May 3, 2011
I would like to try tvtime on my Dell PC, bu I do not understand how to use the encrypted signal from comcast cable. I realize I will need to purchase a tv capture card. What is the best one for a Intel Core I3? Is there a USB version that will work?My TV is hooked to a TIVO HD box that has a comcast cable card. Is the signal decrypted by the cable card and then is it just necessary to obtain the decrypted signal from the TIVO output?
View 3 Replies
View Related
Feb 11, 2010
I have been trying to get tvtime or any tv package to work with my Pinnacle PCTV HD usb but I have not had success. I have correctly installed every driver imaginable. So, here is what it what it comes down to: When I open tvtime it says "cannot open capture device /dev/video0" and the screen is blue. But my usb PCTV HD stick is NOT /dev/video0 so the question is how can I get tvtime to look for the usb tv tuner rather than video0?
View 9 Replies
View Related
May 20, 2010
I get perfect picture with Tvtime, but can't watch /dev/video0 with any other programs, I've checked if some proccess use it, and it's not it.
I wan't to watch this with vlc, tv-viewer or other programs to record, but when it doesn't recognize anything!
View 9 Replies
View Related
Jun 7, 2010
After installing Ubuntu 10.04 LTS over the weekend I had some problems, which I subsequently solved and thought I'd mention here.
- First, the dreaded Low Graphics (EE)NOUVEAU(0):Error allocating scanout buffer:-12 which wouldn't allow me to change my monitor resolution.
- Second, TVTime television viewer would not launch at all.
Solution to BOTH of these problems:
From Synaptic uninstall xserver-xorg-video-nouveau (experimental) and reinstall xserver-xorg-video-nv.
Now everything works!
View 4 Replies
View Related
Jul 30, 2011
Tvtime built in volume control stopped working in maverick because it depends on kernel support of Open Sound System (oss) and ubuntu kernels are no longer compiled with this turned on.
You can get an experimental deb of tvtime for maverick here:[URL]
which will work with ALSA sound system.
Here is a partial solution I found on the Russian Ubuntu board by Alexandris if you cannot get the above deb to work for you:
tvtime configuration file at /etc/tvtime/tvtime.xml will allow you to reassign the left and right arrow keys to control whole system volume level while tvtime is running.
Make the following changes in tvtime.xml:
1. comment out existing left and right keybindings by enclosingg them with '<!--', '-->' tags:
Code:
<!--
<bind command="left">
<keyboard key="left"/>
<keyboard key="-"/>
[Code]....
3. save changes to tvtime.xml and start tvtime in a terminal window and see if there is any error messages. The Russian Ubuntu board recommended using "amixer -c default" , but I had to change mine to "amixer -c 0" (the number of my sound card) to get things to work. You might have to do the same...
View 1 Replies
View Related
Feb 11, 2011
I have been using Tvtime for several years and never had trouble with the video until now. Now it opens, but it's frozen. There is no picture and no sound, just a black screen that I can't control in any way. Even to close it, I have to go through the terminal.I can still get channels using Mplayer, so the tuner should not be the problem. However, t is an Hauppauge 950.I was using Lucid on both partitions. Initially, one quit,but not the other. About a month later the other quit while I was watching which makes me think it may be something I have simply hit on the keyboard. I have since upgraded to Maverick on one and reinstalled Tvtime to no avail
View 3 Replies
View Related
Sep 15, 2010
I have installed Tvtime and XawTv applications and I am currently trying to configure both these applications to detect my tv tuner card (pixelview play tv pro with conexant cx2388 chipset). configure both video and audio with channel scan for my tv tuner card?
View 2 Replies
View Related
Jun 14, 2011
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
View 9 Replies
View Related
Jun 24, 2011
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies
View Related
Dec 29, 2009
openSUSE 11.2 64bit
libxine1 from Packman
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.
Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).
alsa-info here - [URL]
Also I am totally confused by the mixer, it has so many knobs that I am totally lost!
here's a lovely pic - [URL]
View 4 Replies
View Related
Feb 9, 2010
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
View 1 Replies
View Related
Jun 24, 2010
I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)
View 3 Replies
View Related
Oct 17, 2010
I have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
View 2 Replies
View Related
Aug 24, 2010
I have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below)
Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
View 1 Replies
View Related
Oct 17, 2010
I have configured my sound drivers several time. But after booting there is no sound.
View 9 Replies
View Related
