Ubuntu :: Speaker Audio Quit Working (10.04)
Jun 23, 2010
So sound from the speakers on my laptop (hp mini 311) quit working randomly. I either installed an update or just rebooted and it quit working. The sound from the headphone port still works but that is annoying.
Here is some information about my hardware.
Code:
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:d3100000-d3103fff
Code:
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
View 1 Replies
ADVERTISEMENT
Mar 17, 2010
Through the command prompt, mainly wav files, wanted to see if there is any way to get this done?That would be the pc speaker on the board, I can get it to beep at frequencies.
View 1 Replies
View Related
Feb 4, 2011
I installed Xubuntu to a flashdrive using unetbootin. Since I only have a 2GB drive I installed Fluxbox instead of XFCE to save space. I install alsa-utils to try to get some audio going. aplay and speaker-test gets nothing at all. Both as sudo and a reg user. I have turn up the volume on everything in alsamixer. I believe the relevant drivers are loaded.
Code:
View 1 Replies
View Related
Jan 28, 2010
My workstation has a built-in speaker that, surprisingly, plays audio very well. I also have external speakers hooked up to the audio out jack which are easier to hear. Unfortunately, when I try to play some audio material, sound comes out of both the external speakers and the built-in speaker on the workstation.
I'd like to disable the speaker inside the machine, and just plug in head-phones to the external speaker so I can listen to training material at work without bothering my office mate. I'm not sure how to do this in Linux (Suse Enterprise Desktop 11). Fiddling around with the Gnome audio tools doesn't list two different audio devices on the machine.
From what I can tell, sound is played through the ALSA system. I looked in my home directory and there is no .asoundrc controlling configuration.
I should also add that I check in the BIOS for a way to disable the built-in speaker, but I could not find such a setting.
View 3 Replies
View Related
Aug 23, 2011
I have a Acer emachine E732z laptop. I have installed debian squeeze gnome, but it is unable to play audio through laptop speaker. The (3.5mm)audio jack is working fine and I can play audio through it. I have also installed Linux mint, but no audio(in speaker and audio jack). There is no such problem in Windows7.
View 1 Replies
View Related
Sep 26, 2010
Let assume that we have the following situation: we have a sound in the speaker systems or in earphones, maybe we play an audio CD, some mp3's or maybe a movie, etc.
All I know is that the sound goes through sound card to speaker system or in earphones, no matter the source.
How can I obtain the audio stream that I hear in speaker system or in earphones?
I would like to write an application that record and analyze the audio stream that I hear in my speaker system or in earphones. My OS is Ubuntu 10.04.
If you have a recommendation like "try to use ALSA", please provide more details like "in alsa-utils you have a class Class_Name, with the following function Funcation1, etc. Try to use the Function5 as in the following example".
View 1 Replies
View Related
May 9, 2011
I want to know the steps involved in playing an audio file from music player to the speaker.
View 3 Replies
View Related
Aug 10, 2010
i'm using ubuntu 10.04 64bit and i have a netbook(model is hp mini 110-3004TU) with an integrated HD audio from IDT.the problem is that no sound is coming out from the speaker
View 9 Replies
View Related
May 12, 2011
I am using 10.04.I have used Devede for a year or more and it has worked great untill a couple of weeks ago. When I go on the menu and select it the menu goes away and nothing happens. When I run it fron the terminal I get;
devede
(process:751): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
DeVeDe 3.16.9[code].....
I do not know what this means.
View 9 Replies
View Related
Oct 10, 2010
I installed 10.10 on my 2nd laptop with the SAME internal wireless card as my other laptop, but Ubuntu all of a sudden acts like I have no wireless card? When I click on the network icon in the panel, Wireless Connections is enabled, but Ubuntu shows no available wireless networks? I can switch to my other laptop and it works fine.
View 9 Replies
View Related
Sep 27, 2010
Courtesy of Peacedog I managed to get my usb wireless-n adapter to work in Ubuntu 10.04. Unfortunately, Windows managed to hose the hard drive while I was configuring it so I had reformat and reinstall both WinXP and U10. The USB wireless-n works perfectly under WinXP but nothing happen under U10. The icon in the Panel shows spinning arrows indicating there's a connection but I can't actually get out. Here are the outputs requested from the previous go around.
root@Homebrew:/home/red# lsmod
Module Size Used by
binfmt_misc 6587 1
fbcon 35102 71
[Code]......
View 2 Replies
View Related
Feb 17, 2010
I just did a fresh install of 9.10 about 4 or 5 days ago on my HP dv7 computer. I have a Broadcom 4322 wireless card. I had some initial trouble getting my wireless to work, but I was able to find and install the Broadcom STA wireless driver necessary for the wireless card to work, and since then it was rough skating, but at least it was skating, until about half an hour ago.
Everything was working fine until my battery died unexpectedly and the computer shut down. When I restarted it I was not able to reconnect to wireless, and although I have the Broadcom driver installed, it says "This driver activated but not currently in use." I have a touch panel to turn on my wireless which is supposed to turn blue when I touch it to signal that the wireless is on, but no matter how hard I try, the touch panel wireless button stays orange. It does not seem to be able to recognize that my wireless card exists.
[Code]....
View 1 Replies
View Related
Jul 17, 2011
I just upgraded to 10.04, as of this upgrade, samba has quit working.
From Windows I can ping the linux box (192.168.1.110) If from Windows I key in ->Start->Run->\192.168.1.110 I connect to my linux box.
If I try to access the linux box through the name, (\tardis) I get network path not found.
Everything worked fine before the upgrade, now I cannot see my linux box via its network name. I have a WD TV Live on my network and I must be able to see the linux box via its network name or I cannot connect to it.
iptables shows no rules
smbtree returns
SONCOM
\WINDOZE
\WDTVLIVE WDTV LIVE
Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED
[Code]....
View 9 Replies
View Related
Jan 6, 2010
I have no idea why but my keyboard suddenly stopped working in X when I started my computer this morning! The keyboard still works fine in the command line mode, though, so I can do stuff as long as it does not involve a GUI. (NetworkManager only works in X).
View 7 Replies
View Related
Nov 28, 2010
I have a problem with Xorg, I am not sure if the black screen is related, but sometimes when I am just using the computer, with heavy processor and memory, but sometimes not, but the title bars to the programs disappear, my compiz effects quit working, and the cairo dock becomes unusable, so I cannot switch windows, but I can close them using 'File > Close" to access the windows under the ones on top, and to fix it I have to switch over to a terminal "Ctrl + Alt + F2" and log into that to kill Xorg by "sudo top" and killing it with the PID.
And the Blanking Screen, I am just doing usual programming with Bluefish, Eclipse and the terminal, and the screen will just go black, and won't come on if I wiggle the mouse, press a key on the keyboard or turn it off and back on, the status light on the monitor stays green, and doesn't go to orange as if it were unplugged or the computer went idle, so I know that it is still communicating with the monitor, but the way I fix this is I have to manually power down the machine via the power button and turn it back on and it works normally for a while.
View 9 Replies
View Related
Jun 21, 2009
For what it is worth 2 hard drives have Kubuntu 8.04 and the 3rd has Mandriva Spring 2008. Tuesday was the last time I had used Pidgin and everything was fine. Wednesday when I booted the computer I noticed that the Pidgin icon in the sys tray looks broken. I click on it and it shows "Pidgin is available" "connecting" and that's it. The buddy list is empty. Went to my other Kubuntu hard drive, same thing, went to my Mandriva hard drive same thing. Installed Kopete on this hard drive and it shows no one available.
I did a search here before posting and found nothing.
View 12 Replies
View Related
Apr 17, 2010
I just installed some updates, one of which might have been
kdebase-3.5.4-20.el5.centos.i386.rpm.
Before I installed the updates, switching to a VT console using ALT+CTRL+Fn (n=1..6) worked, but after installing the updates it quit working within a KDE session. It does still work from the login screen (so it's not an X problem, or a /etc/inittab problem). After logging into a KDE session, I can get to a VT console if I first use ALT+CTRL+F12
Here's the keyboard section from xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
There is no option DontVTSwitch line. I have the same problem on another computer. That one is more of a problem because its keyboard doesn't have an F12 key. What to do?
View 5 Replies
View Related
Apr 7, 2011
I installed Ubuntu 10.04.2 LTS version in to Asus eeeTopET1610 PT PC. It has the following sound card configuration:
Sound Driver:3.8.1a-980706 (ALSA v1.0.23 emulation code)
Installed drivers:
Type 10: ALSA emulation
Card config:
HDA Intel at 0xfbbf8000 irq 29
Audio devices:
0: ALC887 Analog (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers:
0: Realtek ALC887.
There is no audio output coming from the inbuilt speakers. when headphone is connected, audio is available with headphone. But not with the internal speaker when headphone is not connected.
View 7 Replies
View Related
Nov 30, 2010
Two days ago, the down arrow cursor key quit working on my usb keyboard. I could go up, or left and right, but not down. I figured the key was broke and pulled out a PS/2 keyboard and plugged it in. Problem seemed to be solved.This morning, the down arrow cursor key again was not working. I thought that was a weird coincidence, so I plugged in the old usb keyboard, and the down arrow cursor key was again working!
View 7 Replies
View Related
Jan 22, 2011
I have installed Ubuntu 10.10. everything is ok except with internal speaker in my HP Compaq dc7900 Convertible Minitower PC. audio is coming through headset but not through internal speaker. what might have gone wrong with my system. but it is working with windows 7 ultimate. i'm using dual boot. i have installed the same ubuntu 10.10 64 bit in my laptop DELL Inspiron N4010, with this everything is fine. but i have problem with hp desktop internal speaker. what should i do?
I have observed one thing that in SYSTEM >SOUND > OUTPUT Connector has only two options 1. Analog Headphones 2. Analog output.but in my DELL Inspiron N4010 one more option is there "Analog Speakers".
View 6 Replies
View Related
Jan 5, 2010
We have a target board with intel atom processor(COM). OS : Ubuntu 9.04 But I am not able to hear the Internal speaker sound. ->pcspkr driver is present. ->Different tests were conducted inclding echo -e "a" , console-beep package ,writing to the port etc. ->Sound is not heard during system startup also.
View 4 Replies
View Related
Jan 15, 2010
I just install Kubuntu 9.10 everything is work find but my logeitech usb speaker. It says its on defualt and it not muted. I can also see the volume go up and down when I press the buttons on my speakers.this is what I get when I
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
[Code]...
View 2 Replies
View Related
Oct 18, 2009
I am a happy user of Slackware 13, but there is an annoying problem with ALSA (or anything else??) on my system.Sometimes (rather often) only one speaker of my system plays music.I use plain Slackware 13, without /etc/asound.conf and ~/.asoundrc-- ALSA restart /etc/rc.d/rc.alsa doesn`t help-- muting/unmuting the mixer doesn`t help-- Rebooting the PC helps - most of the times1. )My Card is
bash-3.1$ cat /proc/asound/cards
0 [CA0106 ]: CA0106 - CA0106
Live! 7.1 24bit [SB0410] at 0x9c00 irq 22
[code]...
View 1 Replies
View Related
Jun 20, 2011
My audio is working, but when i put my usb speaker in it, it doesnt redirect sound to the speaker, just continues to play from the laptop.
In gnome, System->Prefernence->Sound shows the following:
Device: HDA ATI SB
Device: Logitech USB speaker (Alsa Mixer)
lsusb shows:
Bus 002 Device 003: ID 046d:0a04 Logitech, Inc. V20 portable speakers (USB powered)
dmesg shows:
[ 1530.060050] usb 2-1: new full speed USB device using ohci_hcd and address 3
[ 1530.229080] usb 2-1: New USB device found, idVendor=046d, idProduct=0a04
[Code]....
my usb speaker has volume control-up/down, mute, that seems to work, just no sound coming out of it. I am running Squeeze 6.01, kernel 2.6.32-5-686 Also I have 2 computers with squeeze 6.01 installed, both doesnt output usb sound, but the speaker works fine with winXp and ubuntu.
View 1 Replies
View Related
Jan 18, 2009
In lmms there is no sound and it says:
No audio-driver working - falling back to dummy-audio-driver
in the command prompt. Sound works everywhere else just not lmms.
View 3 Replies
View Related
Sep 24, 2010
So I have force quit and the little window is stuck. reads "click on a window to force the application to quit. To cancel press <ESC>" How the heck do I get rid of it? I tried xkill, it does not work.
View 3 Replies
View Related
Aug 4, 2011
i recently installed lubuntu on my netbook, i love it but the only problem is i dont get audio, ive tried a few things, but nothing has worked. i have a bit of terminal experience, so i dont mind using that
View 2 Replies
View Related
Apr 29, 2010
I am currently running Ubuntu 9.04 and am looking at upgrading to the upcoming 10.04 LTS release. And have been trying out the new version using the release candidate live CD. The main problem is one that was also evident when 9.04 was originally installed - audio recording and monitoring simply is not working. With 9.04 it took several hours of head-banging and reading HOW-TOs and guides to get to the point where audio input to the sound card played through the speakers and can be recorded by programs such as Audacity.
I've been trying to poke around with 10.04 to get the same results and so far had no success. (Things have changed sufficiently that it does not seem straightforward to simply replicate my 9.04 settings.) This is on 64-bit Ubuntu with a Soundblaster Audigy sound card. It's a little disappointing that we are not yet at the point where this type of basic functionality is working "out of the box" with Ubuntu. Anyone have any tips to setting up 10.04 for audio recording and monitoring?
Although I never did get this working with the live CD, recording worked fine after doing a test installation of Lucid on a spare hard drive. With the live CD the primary line input was not even showing up in alsamixer. With Lucid installed it was no problem to find and crank up the volume on this input. In actuality then, once the installation was actually done it took much less fiddling with this release than it did with 9.04 to get the same results.
View 1 Replies
View Related
Jun 23, 2010
I have a media center box running Ubuntu 9.10 x64 and XBMC. One day sound just stopped working on it. I did not install any updates around the time this happened. I have tried using a known working sound card. I verified the main volume is up and everything else in alsamixer looks OK. I have tried connecting known working headphones. Confirmed the kernel sees the hardware and loads to module for it. Confirmed several audio applications have no sound. I've confirmed it is set to use the correct sound card. I even booted into a live disk of the same version if Ubuntu and audio works fine there.
No errors are produced by any application, they act like they are playing audio just fine. The only entries in the logs about this I can find is below.
View 6 Replies
View Related
Feb 3, 2010
I have a Mythbuntu 9.0.4 fresh install and seem to be having issues with audio over HDMI. I can get audio over the headset output (green round port).
I am guessing this probably has something to do with the default sound card that is used to output when I play something, say internet radio. how to configure Ubuntu to use the HDMI output as default.
The motherboard is: [URL]
Output of the following:
$ cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe7f4000 irq 16
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfe9e8000 irq 19
[Code]....
View 1 Replies
View Related
