Ubuntu Networking :: Samba Quit Working After Upgrade?
Jul 17, 2011
I just upgraded to 10.04, as of this upgrade, samba has quit working.
From Windows I can ping the linux box (192.168.1.110) If from Windows I key in ->Start->Run->\192.168.1.110 I connect to my linux box.
If I try to access the linux box through the name, (\tardis) I get network path not found.
Everything worked fine before the upgrade, now I cannot see my linux box via its network name. I have a WD TV Live on my network and I must be able to see the linux box via its network name or I cannot connect to it.
iptables shows no rules
smbtree returns
SONCOM
\WINDOZE
\WDTVLIVE WDTV LIVE
Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED
[Code]....
View 9 Replies
ADVERTISEMENT
Sep 27, 2010
Courtesy of Peacedog I managed to get my usb wireless-n adapter to work in Ubuntu 10.04. Unfortunately, Windows managed to hose the hard drive while I was configuring it so I had reformat and reinstall both WinXP and U10. The USB wireless-n works perfectly under WinXP but nothing happen under U10. The icon in the Panel shows spinning arrows indicating there's a connection but I can't actually get out. Here are the outputs requested from the previous go around.
root@Homebrew:/home/red# lsmod
Module Size Used by
binfmt_misc 6587 1
fbcon 35102 71
[Code]......
View 2 Replies
View Related
Feb 17, 2010
I just did a fresh install of 9.10 about 4 or 5 days ago on my HP dv7 computer. I have a Broadcom 4322 wireless card. I had some initial trouble getting my wireless to work, but I was able to find and install the Broadcom STA wireless driver necessary for the wireless card to work, and since then it was rough skating, but at least it was skating, until about half an hour ago.
Everything was working fine until my battery died unexpectedly and the computer shut down. When I restarted it I was not able to reconnect to wireless, and although I have the Broadcom driver installed, it says "This driver activated but not currently in use." I have a touch panel to turn on my wireless which is supposed to turn blue when I touch it to signal that the wireless is on, but no matter how hard I try, the touch panel wireless button stays orange. It does not seem to be able to recognize that my wireless card exists.
[Code]....
View 1 Replies
View Related
Jun 21, 2009
For what it is worth 2 hard drives have Kubuntu 8.04 and the 3rd has Mandriva Spring 2008. Tuesday was the last time I had used Pidgin and everything was fine. Wednesday when I booted the computer I noticed that the Pidgin icon in the sys tray looks broken. I click on it and it shows "Pidgin is available" "connecting" and that's it. The buddy list is empty. Went to my other Kubuntu hard drive, same thing, went to my Mandriva hard drive same thing. Installed Kopete on this hard drive and it shows no one available.
I did a search here before posting and found nothing.
View 12 Replies
View Related
Jul 12, 2010
I have a LAN with a number of computers including an iMac and a PC dual booting with 10.04.
I recently did an upgrade to 10.04 from 9.10 on both computers.
Under 9.10 I could easily browse either computer using Samba.
Now under 10.04 Samba just does not want to work and won't connect from either computer to the other.
View 2 Replies
View Related
Oct 10, 2010
I had a working server 9.04 on my network and I could access shares via Samba and MacFusion from Windows, ubutu and mac boxes. After the upgrade I can not access shares via Samba, I can ssh in it just fine (no change there) also Macfusion mounts the paths just fine.
Anybody had this problem with the upgrade? It must be samba everything else is working (also I can't access any files from my Ubuntu Laptop running 10.10 Desktop edition)
Here is my smb.conf file:
[global]
workgroup = WORKGROUP
server string = %h server (Samba, Ubuntu)
wins support = yes
; wins server = w.x.y.z
dns proxy = no
[Code]...
View 9 Replies
View Related
May 12, 2011
I am using 10.04.I have used Devede for a year or more and it has worked great untill a couple of weeks ago. When I go on the menu and select it the menu goes away and nothing happens. When I run it fron the terminal I get;
devede
(process:751): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
DeVeDe 3.16.9[code].....
I do not know what this means.
View 9 Replies
View Related
Jun 23, 2010
So sound from the speakers on my laptop (hp mini 311) quit working randomly. I either installed an update or just rebooted and it quit working. The sound from the headphone port still works but that is annoying.
Here is some information about my hardware.
Code:
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:d3100000-d3103fff
Code:
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
View 1 Replies
View Related
Oct 10, 2010
I installed 10.10 on my 2nd laptop with the SAME internal wireless card as my other laptop, but Ubuntu all of a sudden acts like I have no wireless card? When I click on the network icon in the panel, Wireless Connections is enabled, but Ubuntu shows no available wireless networks? I can switch to my other laptop and it works fine.
View 9 Replies
View Related
Jan 6, 2010
I have no idea why but my keyboard suddenly stopped working in X when I started my computer this morning! The keyboard still works fine in the command line mode, though, so I can do stuff as long as it does not involve a GUI. (NetworkManager only works in X).
View 7 Replies
View Related
Nov 28, 2010
I have a problem with Xorg, I am not sure if the black screen is related, but sometimes when I am just using the computer, with heavy processor and memory, but sometimes not, but the title bars to the programs disappear, my compiz effects quit working, and the cairo dock becomes unusable, so I cannot switch windows, but I can close them using 'File > Close" to access the windows under the ones on top, and to fix it I have to switch over to a terminal "Ctrl + Alt + F2" and log into that to kill Xorg by "sudo top" and killing it with the PID.
And the Blanking Screen, I am just doing usual programming with Bluefish, Eclipse and the terminal, and the screen will just go black, and won't come on if I wiggle the mouse, press a key on the keyboard or turn it off and back on, the status light on the monitor stays green, and doesn't go to orange as if it were unplugged or the computer went idle, so I know that it is still communicating with the monitor, but the way I fix this is I have to manually power down the machine via the power button and turn it back on and it works normally for a while.
View 9 Replies
View Related
Apr 17, 2010
I just installed some updates, one of which might have been
kdebase-3.5.4-20.el5.centos.i386.rpm.
Before I installed the updates, switching to a VT console using ALT+CTRL+Fn (n=1..6) worked, but after installing the updates it quit working within a KDE session. It does still work from the login screen (so it's not an X problem, or a /etc/inittab problem). After logging into a KDE session, I can get to a VT console if I first use ALT+CTRL+F12
Here's the keyboard section from xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
There is no option DontVTSwitch line. I have the same problem on another computer. That one is more of a problem because its keyboard doesn't have an F12 key. What to do?
View 5 Replies
View Related
Nov 30, 2010
Two days ago, the down arrow cursor key quit working on my usb keyboard. I could go up, or left and right, but not down. I figured the key was broke and pulled out a PS/2 keyboard and plugged it in. Problem seemed to be solved.This morning, the down arrow cursor key again was not working. I thought that was a weird coincidence, so I plugged in the old usb keyboard, and the down arrow cursor key was again working!
View 7 Replies
View Related
Dec 11, 2009
I have just upgraded to FC 12 from FC 11 everything on FC 11 was fine, I has samba, openvpn, subversion, tinyproxy and apache all working fine. Friends could vpn in and do all the stuff they where allowed to do,
Now unfortunately I have this issue after upgrading to FC12, All the samba mounts have disappeared from all my friends computers, when I look at the log files I now see this;
smbd/server.c:457(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
View 1 Replies
View Related
May 20, 2010
I had Samba shares (a public folder and a printer) running fine on Jaunty 9.10, when upgraded to 10.04 it stopped working.
I've tried several tips and following different threads to no avail.
when I run smbclient -L localhost or else smbclient -L 127.0.0.1 I get:
Code:
session setup failed: NT_STATUS_NO_SUCH_DOMAIN
when I run smbclient -L TKA I get:
Code:
Connection to TKA failed (Error NT_STATUS_CONNECTION_REFUSED)
Here is my current smb.conf:
[Code]....
I installed samba4 but did't do any difference, so I uninstalled that. Reinstalled SAMBA and the config tool for samba several times. No difference.
View 3 Replies
View Related
Oct 22, 2010
I have created a Samba share, using the fantastic Webmin tool. I have a network media player which can connect to my router, and then access windows (samba) shares. Most of the time, it works fine - it's able to stream HDTV wirelessly across the network. However, every so often, it just stops working ... the media player sees :
Network, then
WORKGROUP, then
FILESERVER-1 (machine name), then
Media (share name), then
Video (subdir, then
TV_Shows (subdir), then
MyShow.AVI ... just hangs
if I use the Webmin tool, I see multiple samba connections all from the media player. Restarting samba seems to have no effect. The only way to fix it, is to reboot.
logfile I can check, or a setting I can tweak to fix this issue ?
When it get like this, trying to access the share from a windows machine, just gives me an error saying it can't find the machine. But when it's rebooted, it works fine.
I have mapped the "nobody" linux user to "guest" which is what the media player is defaulted to login with (it's primarily sold as a "Windows" media player), and using Webmin I have assigned the "nobody" user read-only rights to the samba share. It worked fine for 6 months, until I added this new drive.
View 2 Replies
View Related
Jun 17, 2011
Been searching for hours and looked at several other threads but still can't figure this out. We have 4 folders being shared from a Ubuntu 10.4.2 LTS Server using Samba. A couple days ago two computers in the office lost access to these shares. The other computers in the office are fine. So far as I know nothing has changed on the server. I can putty into the server still but I can't map a drive or open a window through run (\server_nameetc).
I've also tried disabled iptables on the server and windows firewall on the the windows xp machines. Still no luck. What am I doing wrong? Like I said, so far as I know there have been no changes to the server whatsoever. One day it was working and the next it just stops.
View 3 Replies
View Related
Jan 19, 2010
I'm looking into setting up logging for Samba that logs every file downloaded, uploaded, renamed, deleted, etc, etc. It's currently working, but I'm trying to get it to output to /var/log/samba/audit.log and it's still outputtin Here are my current settings:
[Code]...
View 3 Replies
View Related
Jun 6, 2010
I am at a total loss. For all intents and purposes - sharing files over a lan without a password between this ubuntu 10.04 machine and my wifes laptop (windows 7) should be trouble free. I've installed samba, and created an smb.conf file in /etc/samba
Code:
[global]
workgroup = WORKGROUP
server string = Samba Server
netbios name = oak
security = share
[Code]....
I want to note that I was using Arch Linux and this exact setup worked flawlessly. Why on earth would it not work the same in Ubuntu? Is it not the same Samba?
View 5 Replies
View Related
Jan 9, 2011
I'm running Maverick Meerkat 10.10 x64, and I'm trying to set up a Samba share with user security. In other words, when accessing the share, I want to be prompted for my username and password. Everything in my smb.conf file looks ok to me, but the shares are still accessible with no user security, and I don't know why. The smb.conf file is below:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
[Code]....
View 6 Replies
View Related
Aug 7, 2011
I have some samba shares working where all I did was right click on the folder, enable sharing and enable guest access. These work fine.
However, when I tried to use the manual way:
[URL]
to create samba shares, so that they would be password protected, I cant access them. In windows 7, the shares are visible so I click them, click "use another account" and type in my samba name and password I created, but I can't access them.
Here is smb.conf
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
[Code].....
View 2 Replies
View Related
Oct 11, 2010
i did yum install system-config-samba and it worked and installed when ever i click on it. it says it is starting up and then just crashes.
View 1 Replies
View Related
May 2, 2011
I'm beginning to think linux actually isn't capable of sharing files and printers with anything. I've been trying to get my LMDE to share files and be able to retrieve files from the other windows PCs I have on my wireless network. I would also like to share the printer I have connected to my LMDE install with those same computers. In short how is this done because I pulling my hair out trying to figure out whats wrong.
As I understand it sharing the printer should be easier than sharing files. Its done by CUPS? Anyway I've enabled sharing in the printing, and in the "server settings" windows ticked "publish shared printers connected to this system". That doesn't work. Windows can't find it. Samba on the other hand is even worse. Edit the smb.conf? Nice way of making things complicated!
View 2 Replies
View Related
Feb 27, 2010
I've had my wireless networking (on an Acer Aspire laptop) working perfectly well for at least six months.Now, quite suddenly, after a reboot I get the message from wicd, "No wireless networks found". I probably was running a week or so before that without needing a reboot. Windows wireless is fine (I'm using it to send this post).In addition, my sound stopped working and I see a fleeting message to the effect that the sound system is reverting from analog to digital.I'm running Kubuntu 9.10. My guess is that something in a recent round of updates knocked me out of the box. How can I proceed to set things aright?
View 1 Replies
View Related
Jan 9, 2010
I recently upgraded (via Ubuntuzilla) to firefox 3.5.7 and now, every single time I close Firefox, the program seems to crash without quitting completely.
First, I receive an error saying that the program will not close and asks me if I want to Force Quite or Wait for it to close on its own. This has been happening ever since I upgraded to Karmic and if I just wait it usually quits fully after a couple seconds.
Now what happens is this: the window still closes, but if I try to reopen Firefox then I get this error stating that Firefox is already open and therefore cannot be opened again. The only way to get back into Firefox is to restart the entire computer. (Incidentally, this is the same problem that occurs whenever I try to Force Quit Firefox)
This now happens every single time I "close" Firefox.
Does anyone know the source of this error? Or a workaround?
View 4 Replies
View Related
Mar 3, 2010
I think an update or something has killed Samba on my Karmic box. it can see Windows shares OK, but it no longer appears on the Windows network.I have not changed my smb.conf for months, so something else has been modified.Looking in the logs I can see the following in "log.winbindd-idmap" after restarting Samba
Code:
[2010/03/03 10:07:20, 0] winbindd/idmap.c:201(smb_register_idmap_alloc)
idmap_alloc module tdb already registered!
[2010/03/03 10:07:20, 0] winbindd/idmap.c:149(smb_register_idmap)
[code]...
All other networking seems fine (internet, Synergy+ etc) it's just sharing out to the Windows network that is broken.
View 2 Replies
View Related
Dec 1, 2010
I set up a Ubuntu Server for my home network to share among Win XP and Ubuntumachines.Initially everything worked fine with all Win XP machines being able to share files on the server; however, after I installed and setup SSH between my Ubuntu machines and my Ubuntu Server I now cannot share and/or even see my Server directory from Win XP or Ubuntu machines through the Samba.I have tried for 2 days to figure out the problem without success.Did I break something while setting up the SSH? How can I fix Samba?Here's some things I have setup or tried so far:1. Samba users are setup and were working previously.2. Samba share drives were setup and working previously.3. I can see the Server using SSH or SFTP from my Ubuntu machines.4. I have gone over the Samba config file numerous times5. I am administering Samba on the server via the terminal and Webmin
View 9 Replies
View Related
Apr 13, 2011
I have internet on my ubuntu machine (eth0) I am sharing with (eth1) My windows computers are getting IP addresses via DHCP from the Ubuntu Machine, and I can see (and use) samba/windows shares on all computers.Internet connection is not working on any of the windows computers. I have eth1 set to "shared to other computers" under the IPv4 settings
View 5 Replies
View Related
May 20, 2011
I have installed Samba 1.2.63-0Ubuntu4 (system-config-samba) on Ubuntu 10.04, and it has been working without any issues for a few months now, but now the username/password authentication does not work anymore and I can't figure out why
I have tried changing username/password(thinking maybe i forgot the correct credentials) and the new username/pass does not work either.
I have also tried "sudo service smbd restart" in terminal to restart samba but this does not work either
I can still see visible shares when browsing server via "network neighborhood" on XP,,, and can access the shares that do NOT require authentication
username/password are made up of standard characters as well
View 2 Replies
View Related
Jun 20, 2010
I can't get the samba server to work on a Fedora 13 system. First of all, I've activated the "smb" service. After this, since I couldn't find any samba configuration tool in Gnome, I switched to KDE and launched Menu - Computer - System Settings - Advanced - Samba. I typed in my workgroup and netbios name and added a share (2nd tab). Then I added my user name to the blank list "samba users" (4th tab), which wasn't very effective, because this list is blank again when I leave (OK) and reopen this config tool.
From a windows machine, I can't access this Fedora system. Netbios doesn't work (ping netbios name - ...could not find name...) and trying \IP in the explorer shows an error message "Windows cannot find...".
Btw firewall and Selinux are both deactivated.
When I open Dolphin on the Fedora locally and type "smb://localhost" it *does* show a logn window, but no matter what I type in there, it just shows this login windows again after clicking OK.
View 10 Replies
View Related
