Ubuntu :: Internal Speaker Is Not Working In Hp Compaq Dc 7900
Jan 22, 2011
I have installed Ubuntu 10.10. everything is ok except with internal speaker in my HP Compaq dc7900 Convertible Minitower PC. audio is coming through headset but not through internal speaker. what might have gone wrong with my system. but it is working with windows 7 ultimate. i'm using dual boot. i have installed the same ubuntu 10.10 64 bit in my laptop DELL Inspiron N4010, with this everything is fine. but i have problem with hp desktop internal speaker. what should i do?
I have observed one thing that in SYSTEM >SOUND > OUTPUT Connector has only two options 1. Analog Headphones 2. Analog output.but in my DELL Inspiron N4010 one more option is there "Analog Speakers".
View 6 Replies
ADVERTISEMENT
Jan 5, 2010
We have a target board with intel atom processor(COM). OS : Ubuntu 9.04 But I am not able to hear the Internal speaker sound. ->pcspkr driver is present. ->Different tests were conducted inclding echo -e "a" , console-beep package ,writing to the port etc. ->Sound is not heard during system startup also.
View 4 Replies
View Related
Feb 17, 2011
I have a HP Compaq dc5750 desktop pc, which has a internal speaker for audio playback. My problem is that I can only get audio from this speaker, when I plug something into the rear jack stick, the sound still comes out of the internal speaker. I have tried to install alsamixer and unmuted AUX and Line IN, and increased volume to 100%. Sound is working, but only on internal speaker!.
View 6 Replies
View Related
Feb 9, 2010
explain to me how to get sound through the internal speaker of my computer. Everything else works fine. IE, if I plug in a headset or boxes, they work fine.
View 4 Replies
View Related
Jun 21, 2010
linux kernel 2.6, Sklackware 12.0. I have the suspicion that the internal pc speaker does not work. Is there a linux application to beep the speaker? Or perhaps somebody could send me a small script to make it beep.
View 3 Replies
View Related
Dec 12, 2010
I've got a final revision of the G4 Mac mini, the 1.5GHz model, dual booting 10.04 LTS and OS X. One of the issues I've had is that the internal speaker doesn't work under Linux, or so it's been reported on various post and sites. It turns out it's a simple matter of flipping some ALSA control options. With an ALSA mixer you must enable both the Speaker and the Headphone to get audio to play over the internal speaker. It will still play over the external headphones/speakers if they are still plugged in. I'm not sure if this is a problem with the ALSA, OSS, PCM or snd_powermac drivers or just something setup wonky in the configs. I've used both GNOME ALSA Mixer GUI and the alsamixer command line tool to do this. The alsamixer tool will mostly work in an X-term, as the F-keys don't pass though. It is fully functional on a console login. I also noticed that audio plays back per-user. When I switch from X to a console he sound is cut off, and when I get logged in as the same user the audio comes right back in.
View 1 Replies
View Related
May 11, 2011
I'm a new user of "Debian Squeeze", using the testing repositories, and it's de first time that I post in this forum. I'm very happy to become a member of Debian comunity. Well, I want to change the "beep" sound of the internal speaker to another sound. I mean to any sound on my external speakers. I've searched about it but I haven't found anything useful.
View 1 Replies
View Related
Jan 27, 2010
Running FC12 on Dell optiplex 745, Intel's 82801H and using Pulse (did not change anything from fresh install).
Sound works great, but for some reason, I can not disable the internal speaker that sits on the motherboard. meaning, if I play something it comes out from the audio output in the back (its going to amplifier) and also from the friggin internal speaker, a bit annoying...
I've been installing all kind of pulse management tools, can't find how to disable this.
didn't find anything in the board's BIOS.
I don't see pcskpr loaded (I guess its not used anymore).
View 1 Replies
View Related
Apr 8, 2010
I Just want to like if my system has internal speaker present or not , i'm using rhel4,i don't get any beep sound at the time of my booting,here's my some observation i made in my system
Code:
[root@malick ~]# lsmod |grep snd
snd_azx 21841 2
[code]...
View 6 Replies
View Related
Dec 2, 2009
I am having trouble getting my internal speaker to work on openSuSE 11.2. These are the symptoms and my experiences to date. When I boot my machine the internal speaker emits a beep. On my other machines, I get a similar sound when I press Escape in vi (in command mode). It is this beep from the internal speaker that I am having trouble with. Looking around on the web I see that it is reported that the module snd-hda-intel can interfere with the internal speaker. When I unload this module using rmmod, I do get the beep from the internal speaker. When I reload it, the beep does not sound. Some of the reports seem to attribute the problem to a configuration option for the sound module called "digital beep" that needs to be enabled.
Using "make -C O=`pwd` cloneconfig" on my kernel sources, I see that the option CONFIG_SND_HDA_INPUT_BEEP is set to y. Also affected are things like printf ( "a" ) and sending Control-G to "cat" or "cat > /dev/console". what do I need to do get the internal speaker to sound while at the same time retaining the full capabilities of the sound system?
View 1 Replies
View Related
Jul 7, 2011
I live in a crowded area so I have to use headphones almost all of the time. I just leave them plugged in so when an alarm goes off from Thunderbird or Evolution, I can't hear it. Is there a way to get some use out of my internal system speaker and have a reliable calendar-event-reminder and alarm? I'm talking about the one that will beep from inside the computer even if you have headphones plugged in.
View 2 Replies
View Related
Jan 13, 2016
Just installed sid on a new system and I'm having a problem with pulseaudio.I have a motherboard with built-in Realtek audio, and the system should use that for everything except the system bell, which goes through the internal PC speaker that's connected to the motherboard.It works that way on the console. If I type C-g in Emacs, the pc speaker beeps, same with bash completion etc, while aplay will play wav files through the external speakers connected to the sound card. It's perfect.
Now in X, pulse doesn't know what to do. It defaults to the external sound card speakers, so they play all "normal" sounds (like music files) but when I type C-g in Emacs, there's a drip sound that comes out of the speakers. The internal PC speaker doesn't beep at all.I'm using GNOME 3, and I like it, so I can't just purge pulse because it wants to take GNOME with it. If I go to setup > sound, "Line Out - Built-in Audio" is selected, but I have another option for "Analog Output - pcsp" ... that's the snd_pcsp module for the internal speaker. If I select that, it plays the same sound files but through the internal speaker. So when I do C-g in emacs, the beep does come from the internal speaker, but it's not the normal beep you hear in the console -- it's actually the same ogg (or wav or whatever) file that makes the drip sound from the speakers! And worse, if I sleect the pcsp option in setup, it uses the internal speaker for EVERYTHING - including playing audio music files, watching YouTube, whatever! And naturally the sound is very horrible and fuzzy.
Is there any way to tell pulse that I want to use my motherboard's soundcard for everything but the beep, just like in the console?
View 7 Replies
View Related
Jun 23, 2010
So sound from the speakers on my laptop (hp mini 311) quit working randomly. I either installed an update or just rebooted and it quit working. The sound from the headphone port still works but that is annoying.
Here is some information about my hardware.
Code:
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:d3100000-d3103fff
Code:
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
View 1 Replies
View Related
Apr 7, 2011
I installed Ubuntu 10.04.2 LTS version in to Asus eeeTopET1610 PT PC. It has the following sound card configuration:
Sound Driver:3.8.1a-980706 (ALSA v1.0.23 emulation code)
Installed drivers:
Type 10: ALSA emulation
Card config:
HDA Intel at 0xfbbf8000 irq 29
Audio devices:
0: ALC887 Analog (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers:
0: Realtek ALC887.
There is no audio output coming from the inbuilt speakers. when headphone is connected, audio is available with headphone. But not with the internal speaker when headphone is not connected.
View 7 Replies
View Related
Jan 15, 2010
I just install Kubuntu 9.10 everything is work find but my logeitech usb speaker. It says its on defualt and it not muted. I can also see the volume go up and down when I press the buttons on my speakers.this is what I get when I
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
[Code]...
View 2 Replies
View Related
Oct 18, 2009
I am a happy user of Slackware 13, but there is an annoying problem with ALSA (or anything else??) on my system.Sometimes (rather often) only one speaker of my system plays music.I use plain Slackware 13, without /etc/asound.conf and ~/.asoundrc-- ALSA restart /etc/rc.d/rc.alsa doesn`t help-- muting/unmuting the mixer doesn`t help-- Rebooting the PC helps - most of the times1. )My Card is
bash-3.1$ cat /proc/asound/cards
0 [CA0106 ]: CA0106 - CA0106
Live! 7.1 24bit [SB0410] at 0x9c00 irq 22
[code]...
View 1 Replies
View Related
Feb 11, 2010
I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
[code]....
View 4 Replies
View Related
Jun 20, 2011
My audio is working, but when i put my usb speaker in it, it doesnt redirect sound to the speaker, just continues to play from the laptop.
In gnome, System->Prefernence->Sound shows the following:
Device: HDA ATI SB
Device: Logitech USB speaker (Alsa Mixer)
lsusb shows:
Bus 002 Device 003: ID 046d:0a04 Logitech, Inc. V20 portable speakers (USB powered)
dmesg shows:
[ 1530.060050] usb 2-1: new full speed USB device using ohci_hcd and address 3
[ 1530.229080] usb 2-1: New USB device found, idVendor=046d, idProduct=0a04
[Code]....
my usb speaker has volume control-up/down, mute, that seems to work, just no sound coming out of it. I am running Squeeze 6.01, kernel 2.6.32-5-686 Also I have 2 computers with squeeze 6.01 installed, both doesnt output usb sound, but the speaker works fine with winXp and ubuntu.
View 1 Replies
View Related
Sep 19, 2010
new Compaq 510 laptop in which we installed Ubuntu 10.04. When Wireless is switched on it shows the available networks but won't connect. It connected on a few occasions but still we can't browse. The proxy settings are correct.Will installing wireless drivers help? If so, where can we find them?
View 1 Replies
View Related
May 2, 2011
I just got a new Compaq CQ56 and installed 11.04 32 bit on it. Everything is great except the wireless is not working. I can't even get it to detect the wireless card.
iwconfig:
no wireless extensions
[URL]
Here is the link to the Compaq website. It doesn't say what brand the wireless card is.
View 9 Replies
View Related
Nov 26, 2010
I installed ubuntu 10.10 on my Compaq C700, but when I started it up, I am unable to enable wireless. While reading through other boards, it is apparently common for this computer. However, I have not seen anyone address how to enable wifi on ubuntu 10.10.
View 1 Replies
View Related
Jun 10, 2011
i cant seem to get my mic to work i just installed ubuntu 11.04 on my copmaq
View 3 Replies
View Related
Jan 3, 2010
I have a Compaq n610c laptop equipped with a w200 wireless card on the lid of the laptop. Works fine on XP. I recently formatted the HDD and installed Ubuntu 9.10. Wired network works fine and I've updated to the latest updates etc...However wireless won't work. I've followed the instructions onhttps://help.ubuntu.com/community/Wi...ice/CompaqW200. Everything was going fine until I have to compile. I tried the make command and get the following.
Errors:
make -C /usr/src/linux-headers-2.6.31-16-generic M=/home/gsoo/usb KERNELRELEASE=2.6.31-16-generic modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-16-generic'
[code]....
View 3 Replies
View Related
May 29, 2010
On friday (5-28-10) I installed ubuntu 10.04 Lucid, and everything was just peachy, wireless worked and everything.Today (saturday 5-29-10) booted up to find that my wireless wouldn't work. I plugged up to Ethernet and that worked fine, i updated and everything, still no wireless. I google the problem, and have tried everything under the sun to get this darn wireless card to work. I'm pretty sure it's atheros but i am not sure. when i go to system -> admin -> hardware and drivers nothing shows up
View 2 Replies
View Related
Jun 13, 2010
I acquired an older hp compaq presario computer version 6310us, and initially installed mint, followed by Ubuntu 9.04. Neither one recognized the onboard ethernet port. I checked the bios, and LAN is enabled. It is also enabled in the drop down menu from the toolbar on the desktop. The cable works fine on other computers, and the light on the ethernet port flashes like it does when the cable is connected. I'm new to linux, so not sure what to do to get the connection working.
View 2 Replies
View Related
Dec 18, 2010
I have this laptop, and I managed to find only the .sys and the .inf file for ndiswrapper.It worked, but it said that the firmware is missing. Was this supposed to be a .bin file?
I want to use Ubuntu on my laptop, but I'm really struggling.
View 1 Replies
View Related
May 24, 2010
When I installed opensuse 11.2 on my notebook i found my broadcomm 4312 wlan card in the hardware list, but it's not working. I probed different ways to solve the problem.
I found these methods: [url]
I tested them all.
I'm afraid this is not enough, because the wlan led is not lighting. Every extra button works well such as volume buttons, but the wlan button does not working, so i can't switch on the wlan.
View 1 Replies
View Related
May 19, 2009
I've installed CENTOS 5.3 on my laptop, on dual boot with windows xp. The problem is that my wireless network manager doesn't find any networks. Another laptop with fedora 10 installed finds the network, so the problem is not the network. I guess it's a problem with the wireless driver / firmware, as i had this problem on fedora some time ago, and i've solved installing the firmware. Now i've installed the firmware, i rebooted, and it still doesn't find any network.
View 1 Replies
View Related
May 25, 2010
I have an older Compaq Presario S6000CL, specs for it are here:
*Product Specifications Compaq Presario S6000CL Desktop PC - HP Customer Care (United States - English)
Motherboard and bios here:
*Motherboard Specifications, A7V8X-LA (Kamet 2) Compaq Presario S6000CL Desktop PC - HP Customer Care (United States - English)
I am trying to get SME Server set up as a private server/gateway. Problem is no matter what I do I can only get one ethernet working at a time and only to the internet, not the local network. I tried both SME Server 7.4 and 8.0 beta 5 witht he same result. Now of course I checked the ethernet cards. The two I have now on it do work. One of them is the onboard ethernet the other one is in the second pci slot. They jsut don't work at the same time. (also I am familiar with SME and I had it configured correctly. Even if I messed up the order of the cards it is easy enough to just get up and switch the cables, reboot, etc.) I thought maybe there was a jumper setting or an over ride of some sort to let me use two ethernet cards. <I previously had all of this set up with an old HP computer (came with windows 98 originally.) But that computer decided it was time to retire to the road side.> It seems that it should just work. Any ideas on what I am missing or what I can do?
Edit:Spent another hour trying to get it to work and still nothing. It is picking up both ethernet cards just fine, I just updated sme 8 beta5 so the internet is working fine. I just can't get the local ethernet card to do anything at all, even though it is showing up as a green ok at boot. I checked the bios and I am not seeing anything there. It had an option to enable/disable LAN (which is enabled but I tried both and using to PCI ethernet cards. Didn't do anything different.) It has a Local LAN boot rom option, tried it enabled and disabled (Disabled now.) and nothing. I turned off the serial and parallel ports (doesn't make a difference either way.) I looked all over the motherboard and the only thing I can find is the jumper to reset the password. If a computer that was at least 12 years old could run SME and don't see why this one can't, it is half that age and a much better computer hardware wise.
View 9 Replies
View Related
Feb 27, 2010
I just installed helena on my compaq presario cq61-223sa but i can't get the altec Lansing speakers to work and my internal mic as well. I'm fairly new at linux and have tried looking for drivers but i couldn't find any.
View 4 Replies
View Related
