Ubuntu :: Setting Up A Wireless Conection 10.10
Nov 26, 2010Are there any instructions for setting up a wireless connection for 10.10?I do not know what to put for the following:
SSIS
BSSID
Device MAC address
Cloned MAC address
ADVERTISEMENT
OpenSUSE Network :: Setting Up An Internet Conection?
Aug 10, 2010i got some bad virus on my windows and there is no way to remove it so i need to use linux some time till i find a way to remove the virus.I run a online test to see what linux distribution will be the best for my pc since i have very bad/old pc and i found this one.Everything was fine but when it come the part to get internet access it gone bad...I have adsl modem the model model is DSL-360R.This is how i create a internet access in windows.I open con.panel go to network conections and there is a local area conection icon.Right click/properties the select Internet protocol(TCP/IP) and click install i enter thoose numbers(given by my net provider) Ip address: 192.168.1.2 and etc...(If you need the other numbers i will tell you.).
Then i create a new conection.I use a manual login i have username [URL] and password like 2003.I need to get internet on my linux.I aredy called the support of my operator but thoose noobs said they dont support linux and the man was kindly and said somethink about drivers and said to try somethink with spconfig or somethink like that i dont remmber all i know it didnt worked.That is it i tell you all i know and i hope that u can help me and tell me how to create a new connection. P.s my first impression from openSUSE> The os looks great, i love the instaled theme.
Ubuntu :: Wireless Internet Conection Won't Work?
May 5, 2011I installed it and it seems to run smother than windows vista so far but it wont work with my wireless internet the light that shows it is connected doesn't even glow. I am using a Compaq Presario Labtop.
View 1 Replies View RelatedUbuntu :: RTL8191SE - Unable To Get Wireless Conection
Sep 25, 2010installing driver for RTL8191SE network card. At the moment wireless conection on the PC does not work only wired network is operational.
View 9 Replies View RelatedOpenSUSE Wireless :: Let Ivp6 Try A Conection Before Ivp4?
Aug 24, 2010Both ivp4 and ivp6 activatedon wireless ide/cardhow to try a ivp6 connectionfor instance mirrors.mcs.anl.govfor they are supporting ivp 6so in general first try ivp6 then ivp4
View 1 Replies View RelatedUbuntu :: No VPN Conection After Installing KDE?
Jan 17, 2011i have ubuntu last version installedand now i installed KDE and every thing is ok but when i want to creat a new VPN Conection I cant The Add Button Is Not Enabled Why is that i really wanna use KDE i like it really
View 4 Replies View RelatedUbuntu Networking :: Sharing Network Conection With Xbox 360?
Oct 10, 2010ive just installed ubunutu 10.10 and its connected to the internet via a wireless conection. However I would like to share the connection with an xbox 360 connected to the computer via a ethernet cable. I changed the method under ip4 in the auto eth0 wire connection to "shared to other computers" aplyed and restarted, however whenever the 360 tries to connect itll take a while and then say unable to connect. I also tried this using a ps3 and the ps3 says timed out waiting for ip address. Ive doen this on windows by bridging the connection and it worked without the use of a crossover wire. Would I need a crossover wire?
View 3 Replies View RelatedSlackware :: No Internet Conection On Absolute 13.1.6?
Jan 30, 2011I got the system installes. But it seems that I can't connect to the internet. Trying to pdate the system via gslapt doesn't work. Always says the repositories can't be reached. I use a home network with a skydsl modem and a router. All my other pc's can connect without a problem. It seems that something is not working right here with my Absolute install. I can't even set up a browser or add the Gnome BSG as said with lynx.
View 14 Replies View RelatedFedora Networking :: Configure A Pppoe Conection Over Wlan0?
Feb 18, 2010i can't get a pppoe conection working over a wireless network,in windows I have to connect to the router first, and then put in my user and password to get connected, but i don't know how to do this on fedora, i get connected to the router through network manager, and ping is ok, but when i try to make a new xDSL connection i don't know how to make it work through the wireless network that is established and working with my router.
View 9 Replies View RelatedUbuntu :: Internet Conection - Transfer Rate - When Active - Is About 149b/s Receiving - And About 70b/s Sending
Apr 6, 2011I checked task manager the other day and I discovered that on the network history monitor some bits and bites were transfered in a repeating pattern (like a beacon). The transfer rate (when active) is about 149b/s receiving. And about 70b/s sending. What is this?
No Internet-related program was running from my part...In an attempt to pinpoint what was causing this, I occidentally removed the tools located left and right on the time and date. I've rebooted since but still no tools. The 0/I button is also gone.
Networking :: Wired Ethernet Conection Deminished On Debian Squeeze?
Jan 22, 2011I have a generic P4 desktop computer with Debian Squeeze. Since instalation my wired ethernet connection will slowely slow down and then quit when surfing the web. Sometimes it seems worse than othertimes. If it fails I usualy can get it to come back back up by going to Network Connections and clicking on "wired connection"and them just closing the window. It will work for a bit but the conection will inevitably quit in a short time again. Interstingly it seems mostly a problem with web browsers as doing upgrades, package instalations, using SMXI and things of this sort do not seem to be a problem. I have tried both Epiphany and the Squeeze default Iceweasel with identical results. Also when using Google Earth a similar situation occurs in about 2 minuits of use. The same computer running Debian Lenny with Epiphany and WXP with the dreaded IE do not have this problem.
View 5 Replies View RelatedFedora Networking :: Vodafone Huawei K3520 / Create A Conection To Provider On Boot?
Aug 13, 2010i have a usb modem 3g huawei k3520 that is installed on FC13 minimal only shellli have see that my modem is config with dmesg ....
now i want to create a conection to my provider on boot ... can anyone help me find the files where i create my conection and how can i make my modem to conect autom on boot...????
i m newbie and i don t no very well the shell....
Ubuntu :: Setting Up USB Wireless?
Oct 12, 2010I recently purchased a Netgear G54 wireless USB WG111 so I could acess the net wirelessly from home.
I know I need to load a driver for this for work but I seem to be hitting a brick wall.
I,m useing Ubuntu 10.04 on my desk top and dont have acess to the web. I know there is a wireless network availble as I use it on my mates laptop. I,ve done some researchwhich suggestt that NDISwrapper may help me. But a search of this program "Synoptic manager" comes back and advise that unable to locate program.
With no access to the web and no Wrapper is there another way I can get this wireless device working?
Ubuntu :: Setting Up Wireless Connection?
May 15, 2010I am having some trouble setting up my wireless connection. I have a desktop version of ubuntu, and am trying to connect wirelessly to my modem, but it dosent even seem to be recognizing my wireless usb card. How do I get it to do that? Also, when I go to set up new wireless connection, it asks me for my ssid, mac address, mode, bssid, MTC, Wep index, authentication, ipv4 setting, and ipv6 settings. What the heck am I supposed to put in for those things?
View 5 Replies View RelatedUbuntu :: Setting Up A Wireless Connection?
Feb 16, 2011Set Up and Connect to my Wireless Internet. I have tried to get it to work but I have not been successful so far. Here is what I have done:
Created dutthome3 (My Internet Name) in the Wireless Connections:
Editing Wireless Connection, Wireless Security, IPv4 and IPv6 Screen Shots/Settings:
So where are my mistakes? What do I need to change to Set Up my Wireless Connection?
Ubuntu Networking :: Setting Up As A Wireless AP
Apr 18, 2011I was trying to set up my computer as a wireless AP/router. I am using a D-Link wireless dongle for the wireless network. I have ensured it can be put in the master mode. I followed the instructions on [url] and steps seemed to have been completed without a problem.
However, the wireless signal is not being broadcasted. I cannot see it on my phone or my laptop. The only difference I see is that my Ubuntu installation is the desktop version instead of the server edition. However, I don't think that should be the issue!
The ip addr command produces
Quote:
I suspect this down state to be an issue but the command ip link set wlan1 up is not doing anything
Quote:
Ubuntu Networking :: Setting Up A Wireless Printer?
Jan 28, 2010I just got a new printer (photosmart premium) and I have tried to set it up in the printing config but the listed printers do not include mine..do I have any other options?
View 5 Replies View RelatedUbuntu / Apple :: Setting Up A Wireless Connection?
Jun 11, 2010I'm having a bit of trouble setting up a wireless connection. I'm really trying to set it up for Lucid Lynx on another partition, but right now I'm on OS X running Jaunty Jackalope in Sun's VirtualBox. Neither auto-recognize the network I'm trying to connect too (don't know if Ubuntu has that feature), but OS X has a good connection. I'm trying to set up Jaunty first since I at least have some internet connection, but I'm not planning on using it that much.
So far, what I have put into the Network setup application is the network's name (SSID, right?), that it's WPA, and the network password. Though now I've checked back on the password field, the 8 digit password (eight circles) has been replaced with a bunch of circles, so I don't know what's up with that.
What's empty is the BSSID field, the MAC address, and for all intents and purposes, the password field since it's not the same as what I put in there. I assume OS X has a copy of this information somewhere since it's already connected? I've tried quite a few attempts to get either Ubuntu system to connect, and my google-fu is not helping.
Ubuntu Networking :: Setting Up Wireless Internet?
Aug 1, 2010I just installed Ubuntu 10.04 and am very excited about using it for the first time. I am very new to computers and stuff though so I don't have much of a clue as to what I'm doing. Although it installed fine, for my wireless connection it says "device not ready". What does this mean and how do I connect to the internet?
View 1 Replies View RelatedUbuntu Networking :: Setting Up A Wireless Bridge ?
Oct 18, 2010I have spent the last 24 hours trying to work a wireless bridge (a D-Link DAP-1522) into my network configuration. It would connect to our gateway here at home (some 2WIRE piece of garbage AT&T hands out, but I digress), and two computers (an Ubuntu Desktop and an Ubuntu Server) would connect via the bridge.
The bridge SEEMS to connect to the router, and indeed, the Ubuntu Desktop PC is able to access the internet. The server, however, is not, and neither computer can communicate with the other (ping, SSH, etc.) furthermore, the router recognizes the presence of these two computers on some level, but does not seem to know their IP addresses (I assume this is related to the computers' inability to communicate).
Before I get too far into this, here are a few links/items for the sake of clarity. The first is a shoddy diagram of my (proposed) network topology, for all of you out there who, like myself, understand things visually:[url]
This is the output from running "ifconfig eth0" on the Ubuntu Desktop PC, which sits behind the bridge. The PC is connected, and can ping hosts across the Internet, but can only ping the router locally (that is, it can't ping any other device in the house, on either side of the bridge):
Code:
The router uses wireless encryption, not MAC addresses, to restrict access/traffic, and all wireless devices (including the bridge) have been provided with the proper credentials. There shouldn't be any devices being denied access on account of their MAC address. In fact, the router's control panel lists the PC and the Server among the recognized devices (even lists their MAC addresses), but provides no IP address and always considers the two computers to be "offline." And yet, I am writing this very post from the Ubuntu PC. Sigh.
I am very comfortable with computers, and reasonably comfortable with Ubuntu/Linux and the Linux command line -- I've been using the operating system for just over a year now -- but networking issues have always been perched right on the edge of my understanding. In short, it's likely this issue has more to do with me than it does with the hardware itself (although the more forums I browse, the more I start to doubt this bridge...).
Ubuntu Networking :: Setting Up Wireless Modem In 10.10?
Jan 1, 2011I installed 10.10, I'm using a HP tower with a cisco usb ae1000 modem. I have been on Linux all of 12 hours. I had installed on a old laptop, and hard wired to the router. I really liked the OS. And Long short I killed the laptop, literally.
So I partitioned the family tower, but I cannot connect wirelessly. And to run hard wire to the router would mean a complete tear down of my desk and set up in the living room area, and that will not help out the marriage long/short term.
on the internet connection and I gone through the panels trying to set up the connection but no luck. I'm running Vista and Ubuntu 10.10. I using vista to post here now.
How do I get it to find the wireless router and set up my connection without being hardwire to the router itself.
Ubuntu :: Setting Up Wireless Printer - No Link
Jul 12, 2011Today I dug out an HP C7280 Wireless printer from my parents garage (very nice printer despite being 3 or so years old). I fixed it up and plugged it in and it worked like a charm. Only thing is I want to set it up to work wirelessly as we don't have any extra Printer cables. I cant get it to work though. Firstly, it has no IP address despite wireless being turned on in the printer.
Secondly, and this is probably the main problem, it has no IP address. It just says "No link" or "Not applicable" under network settings. After a lot of digging through google, I've tried everything I could find, from configuring CUPS and HPIJS and the like. Right now I have it plugged into ethernet and it has an IP but entering it into the URL bar of firefox gets nothing. It isn't detected by the printing app in ubuntu, either.
General :: Setting Up Wireless With DSL
May 23, 2010I'm booting DSL off of a USB key on a used laptop I just got. wireless, starting with what the wireless card is, then which driver is needed, and then I think I can use ndiswrapper to install the driver and go from there. I was told to do 'lspci -knn' (not all because I'm retyping the output on my computer that has internet working)
Code:
00:00.0 Host bridge [0600]: Intel Corporation mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
[Code]....
(I left out a lot, let me know if the results of any of these might help: Audio Device, USB Controller, ISA bridge, IDE interface, SMBus, VGA compatible controller, Firewire)
Slackware :: Setting Up WPA Wireless In 13.37?
May 21, 2011I am trying to set a wireless connection up. I have uncommented the ath9k module for my card. I have configured rc.inet1.conf :
IFNAME[4]="wlan0"
USE_DHCP[4]="yes"
DHCP_KEEPRESOLV[4]="yes"
DHCP_KEEPNTP[4]="yes"
[Code]....
AS you can see, everything seem fine when I start wlan0, but I can't connect to the internet through firefox.
Ubuntu Networking :: Setting Up Wireless Access Point?
Jan 13, 2010I have a Sonicwall access point, which I am able to set up through the interface, but after that I am unable to achieve a connection through my wireless card. I have a good understanding of everything involved, but really have no hands on experience when it comes to networking.
Code:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
[code]....
Also, I should have mentioned that @ the interface for the Sonicwall it said that "no DNS server had been specified", but I set it up for DHCP, and I thought my ISP is using PPPoE (which I also thought used DHCP).
Ubuntu Networking :: Sabrent 802.11-N USB 2.0 - Setting Up Wireless Device
May 28, 2010I've been using Ubuntu for a while, but I have never tried to set up a wireless device with it. I have no idea where to even begin. I've done a search of the forums but wasn't able to glean much from it.
View 9 Replies View RelatedUbuntu Networking :: Setting Up Wireless With RealTek RTL8191SE
Aug 15, 2010I have a Toshiba Satellite L655-S5061 laptop and dual-boot Windows 7 and Kubuntu Lucid Lynx. Windows detects and connects to the wireless network just fine, but in Kubuntu it will detect the network but can't connect to it. Sometimes Network Manager will say it's connected, but Konqueror can't load any websites. Plugging in an ethernet cable doesn't give me access to the internet, either.
View 2 Replies View RelatedUbuntu Networking :: Setting Up Wireless Connection To Internet?
Oct 7, 2010I just installed Ubuntu 10.04 . Need to get my wireless router working on my HP laptop. Have been using a Linksys WRT54G Router with windows and it is working properly. Tried setting up in NetworkManager but it does not work.
When looking at things in the Ubuntu terminal it says the network is DISABLED.
Ubuntu :: Setting Up A Wireless Dhcp/dns Server On Laptop?
Nov 4, 2010I'm interested in the possibility of setting up a sort of hotspot using my laptop that will act as both a DHCP and DNS server in the hopes of running a softroot on my Nook e-reader.
According to the instructions posted here: [URL] I need to use Windows 7 and a couple different applications. Windows 7 is not an option for me, as I have Ubuntu Netbook 10.10 installed and would like to keep it that way. Can anyone offer any clues as to what I would need to use?
Ubuntu Networking :: Help Setting Up Wireless Access Point
Nov 7, 2010I'm trying to set up a wireless access point and router using Ubuntu 10.10. My machine has an Atheros AR5001X+ PCI card, and eth0 is connected to an ADSL modem.After literally days and days of going in circles, I'm hoping that somebody here can help get me on track.This sort of works, though I had to go through some other contortions to get the madwifi driver to finally compile on my machine.At this point, I can see and connect to the WAP, but nothing more. When I try "sudo /etc/init.d/networking restart",
I also have a second problem, which is that I want to use WebMin to manage this server, but I cannot figure out how to get the ADSL client module configured -- RP-PPPoE version 3. It seems to expect to work with pppoe-start, pppoe-stop, and pppoe-status, but when I try to run pppoe-status it says "Link is down", even though my ppp connection is actually working.Is is possible to use the WebMin ADSL client module with Ubuntu? I spent a lot of time trying to get pppoe-start, stop, etc. working but it was a complete mess and never seemed to behave. Finally, I just put the ppp startup commands into the /etc/network/interfaces file and that worked, but now the pppoe-* commands no longer seem to function.