Ubuntu / Apple :: Setting Up A Wireless Connection?
Jun 11, 2010
I'm having a bit of trouble setting up a wireless connection. I'm really trying to set it up for Lucid Lynx on another partition, but right now I'm on OS X running Jaunty Jackalope in Sun's VirtualBox. Neither auto-recognize the network I'm trying to connect too (don't know if Ubuntu has that feature), but OS X has a good connection. I'm trying to set up Jaunty first since I at least have some internet connection, but I'm not planning on using it that much.
So far, what I have put into the Network setup application is the network's name (SSID, right?), that it's WPA, and the network password. Though now I've checked back on the password field, the 8 digit password (eight circles) has been replaced with a bunch of circles, so I don't know what's up with that.
What's empty is the BSSID field, the MAC address, and for all intents and purposes, the password field since it's not the same as what I put in there. I assume OS X has a copy of this information somewhere since it's already connected? I've tried quite a few attempts to get either Ubuntu system to connect, and my google-fu is not helping.
View 2 Replies
ADVERTISEMENT
May 15, 2010
I am having some trouble setting up my wireless connection. I have a desktop version of ubuntu, and am trying to connect wirelessly to my modem, but it dosent even seem to be recognizing my wireless usb card. How do I get it to do that? Also, when I go to set up new wireless connection, it asks me for my ssid, mac address, mode, bssid, MTC, Wep index, authentication, ipv4 setting, and ipv6 settings. What the heck am I supposed to put in for those things?
View 5 Replies
View Related
Feb 16, 2011
Set Up and Connect to my Wireless Internet. I have tried to get it to work but I have not been successful so far. Here is what I have done:
Created dutthome3 (My Internet Name) in the Wireless Connections:
Editing Wireless Connection, Wireless Security, IPv4 and IPv6 Screen Shots/Settings:
So where are my mistakes? What do I need to change to Set Up my Wireless Connection?
View 3 Replies
View Related
Oct 7, 2010
I just installed Ubuntu 10.04 . Need to get my wireless router working on my HP laptop. Have been using a Linksys WRT54G Router with windows and it is working properly. Tried setting up in NetworkManager but it does not work.
When looking at things in the Ubuntu terminal it says the network is DISABLED.
View 2 Replies
View Related
Dec 20, 2010
im having a problem setting ad hoc wireless network between two opensuse boxes, using network manager, every time im about to smash the box, maybe im doing something wrong in the steps or something idk
how to set up ad hoc connectionl
note: im a linux rookie
View 3 Replies
View Related
Aug 16, 2010
I have successfully set up a cable internet connection in Ubuntu (created a new DSL connection by typing login and password and connected the cable - it worked). But I have no idea how I can set up a wireless internet connection.I have a wireless access point TL-WA501G, laptop and a cable internet connection with fixed IP address.My laptop can see the wireless access point. But I really do not know how to make it all work and what to start from.
View 2 Replies
View Related
Apr 20, 2009
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies
View Related
Mar 4, 2011
I am new to Fedora have not used it in many years. I have zero networking knowledge. I read several threads on getting the RT 2870 USB connection working. But had no joy after install the three rt2870 kmod items from RPMFusion and rebooting. get this first step in networking done right?
View 5 Replies
View Related
Jul 2, 2011
I have a device that is only accessible using wireless. By default it starts an ad-hoc wireless I can connect to. The problem is there is no internet access on the ad-hoc. So I'm connecting it to my router using the commands (its a gnu/linux):
iwconfig ath0 mode managed essid "ESSID"
ifconfig ath0 192.168.1.25 netmask 255.255.255.0 up
route add default gw 192.168.1.1
I want to add it to start up script but I don't want to get locked out of the device forever if something happens to the router (its really old). Is there any way to check if the connection failed and create an ad-hoc instead if it failed?
View 1 Replies
View Related
Apr 22, 2010
This morning I bought an Apple wireless keyboard and I got it connected through Blueman. It works like a charm, but I have on problem;
When I log out I can log back in by typing in my password. However, when I restart the computer it seems that bluetooth is not loaded yet and I cannot enter my password. So I have to log in using my wired keyboard, and then disconnect & re-connect to my wireless keyboard using blueman before I am able to use the wireless keyboard.
Is there any way that I can already auto-load bluetooth and connect to my keyboard before I log in?
View 4 Replies
View Related
Apr 3, 2011
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
View 3 Replies
View Related
Jun 11, 2010
i am attempting to setup a macbook run by os x 10.5 for dual boot with ubuntu 9.10.
however, when get the part where usually a gui interface which allows one to specify the size of the new ubuntu partition appears i only get the options for using the entire disk, the largest free space or manual partition.
how can i set this machine up for dual boot?
View 2 Replies
View Related
Aug 6, 2010
My dell notebook runs Ubuntu (Karmic Koala). I want to be able to remote access my mom's Mac notebook (I believe it's an Airbook?), so that I can assist her with problems on her computer.What would I need to do on my computer (and how?)What would I need to do on her computer (and how?) to set this up?
View 1 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
Jun 14, 2010
My imac is connected on a wired connection and it keeps losing signal it will work fine for the first couple of minutes
View 3 Replies
View Related
Feb 7, 2011
I have recently got a macbook pro laptop. I cant configure broad connection in the laptop. In my other pc i use pppoeconf and provide username and password to connect. But this is not working in macbook. Though it says "connected",i cant browse any site.
View 1 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jun 11, 2011
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
View 1 Replies
View Related
Apr 4, 2010
I recently installed ubuntu studio 9.10 amd64 on my MBP 5,3 I need an internet connection for updates and to customise my system etc I tried to connect with a wired connection but for some reason I could not configure the ethernet interface. I tried to install the broadcom bcmwl-kernel-source driver by downloading it on another computer and then using a usb stick to transfer it. I had to go through installing several dependencies including dkms and linux-headers-generic. When I finally succeeded the driver showed up in Hardware privers as proprietry but was inactive. Whenever I try to active it I hit 'Activat' I authenticate and the nothing happens. It remains inactive. The wired connection is not readily available to me so it would be great if it was possible to solve this either via a usb or cd.
View 1 Replies
View Related
Jan 24, 2011
So I just installed ubuntu from a net install, and updated from the internet and posted on this site through firefox while installing vlc wich just froze at 90%.....
but when I try to add community repos it comes up with errors. And while running a system check it says I have no internet connection...
I'm connected through ethernet on a router wich works with the g5 in the other room running osx, and the pc upstairs running ubuntu meerkat. Now I had this same problem with SUSE 11.1 and worked around it by adding through terminal but I was never able to add from the GUI.
View 1 Replies
View Related
Nov 12, 2009
Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot
View 5 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
Jan 4, 2010
I've been looking for a way to mount my time capsule drives under Ubuntu, and found some guides, but none of them work for me. Apparently what you need to do is:
sudo mount.cifs //10.0.1.1/timecapsulename/dirname /media/timecapsule/ -o pass=pa55w0rd
My time capsule's ip is 192.168.1.10, it's name is "Time Capsule", the drive I'm trying to mount is called Movie HD
If I input the following command:
sudo mount.cifs //192.168.1.10/Time Capsule/Movie HD /media/timecapsule/ -o pass=mypassword
I get a connection refused error.I tried a couple different variations such as "/"Time Capsule"/Movie HD",etc,every combination, but I get a connection refused error (111) every time.(I have two drives on my time capsule, the internal, Movie HD, and an external usb one, Media HD, I want to actually mount them both)On my time capsule I did set it guest access to read only... Also, when I go to my places> network I do see the time capsule in the list, but I get an error message that it can't access the shares when I try to open it.
View 1 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
May 6, 2011
Just installed Ubuntu 11.04 on my 21" intel mac. Everything went well except it can not detect my wireless connection. What is the best way to resolve this?
View 9 Replies
View Related
May 21, 2010
I have virtual XP set up with VirtualBox and I can't (been trying for a couple weeks now) to get an Internet connection on the VM. I have tried using NAT, bridged adapters and nothing.
View 1 Replies
View Related
Oct 13, 2010
The problem isn't with thew new computer but with my computer running Ubuntu. The problem is that I'm having trouble getting the Internet to work. Before the router I just plug my PC straight into the modem but now with the router I can't get on the Internet. I can get a connection to the router but no Internet. I know the it is not the router because I use my PS3 and it worked fine. I spend like an hour just trying to get the connection but can't figure out the Internet problem. What I did to get the connection is copy the ip address, Mac, and etc. from the PS3. Then I made a new connection and put the data in the IPV4 settings and it got a connection but I'm not sure if I did that right or just got lucky
View 2 Replies
View Related
Apr 30, 2010
I'm trying to set up a wireless connection to my personal wireless net. I have a Linksys N router and I am using a WMN 300n adapter. I found out how to get the connection manager but I'm not sure if i ams upposed to enter the MAC of the router and I know what the SSID is but the B**ssid(not quite sure what that was and I'm on a Win7 system right now)so any info to get my wireless connection now
View 5 Replies
View Related
Apr 4, 2010
I'm unsure about what's wrong in my software setup for my wired DSL connection with my desktop tower-- I can't go to any website nor use apt-get even though Knemo and the panel icon say I'm connected to the Internet. My distro in one computer is sidux (version Mopoc)-- this is the distro that can't connect to the net; in my other computer my distro is MEPIS 8.5 which always connects to the net with the same wired DSL modem, a working wired Motorola DSL modem from my ISP, AT&T-Yahoo. When I want my MEPIS computer to be online I just change the ethernet wire plugged into the modem. [Both desktop towers stand together on a table.]
My ISP (AT&T-Yahoo) won't help me because they only help Windows users. [I only have and use Linux--> MEPIS and sidux.]With sidux, I have ceni to configure the network card which ceni says is a tg3 Broadcom NetXtreme BCM5702X gigabit. With ceni, I pick DHCP but don't know, for the class box, if I should pick "allow-hotplug (removable devices)", or "auto (built-in devices), or "manual". I also don't know what goes in "DNS search" box and what goes in the "DNS Nameservers" box. [With sidux, I also have pppoe-config but I think I'm supposed to use ceni because AT&T at least told me that the pppoe has already been setup inside the Motorola modem.] At www.dnsserverlist.org, I'm told that for my IP, the top DNS servers are 129.250.48.146 and 156.154.70.22. Are these the two strings that go in the "DNS Nameservers" box of ceni? I know these numbers change and I believe they translate the name of a website into the string of numbers for that website. Yes?
I have to ask all this here because there's really no good, detailed help for ceni in the sidux manual. [I had an older version of sidux successfully connected to this AT&T-supplied Motorola DSL modem in the near past, but then I got this newer version of sidux.] Also, man ceni really has no useful info.
View 2 Replies
View Related
