Slackware :: No Internet Conection On Absolute 13.1.6?
Jan 30, 2011
I got the system installes. But it seems that I can't connect to the internet. Trying to pdate the system via gslapt doesn't work. Always says the repositories can't be reached. I use a home network with a skydsl modem and a router. All my other pc's can connect without a problem. It seems that something is not working right here with my Absolute install. I can't even set up a browser or add the Gnome BSG as said with lynx.
View 14 Replies
ADVERTISEMENT
Aug 10, 2010
i got some bad virus on my windows and there is no way to remove it so i need to use linux some time till i find a way to remove the virus.I run a online test to see what linux distribution will be the best for my pc since i have very bad/old pc and i found this one.Everything was fine but when it come the part to get internet access it gone bad...I have adsl modem the model model is DSL-360R.This is how i create a internet access in windows.I open con.panel go to network conections and there is a local area conection icon.Right click/properties the select Internet protocol(TCP/IP) and click install i enter thoose numbers(given by my net provider) Ip address: 192.168.1.2 and etc...(If you need the other numbers i will tell you.).
Then i create a new conection.I use a manual login i have username [URL] and password like 2003.I need to get internet on my linux.I aredy called the support of my operator but thoose noobs said they dont support linux and the man was kindly and said somethink about drivers and said to try somethink with spconfig or somethink like that i dont remmber all i know it didnt worked.That is it i tell you all i know and i hope that u can help me and tell me how to create a new connection. P.s my first impression from openSUSE> The os looks great, i love the instaled theme.
View 7 Replies
View Related
May 5, 2011
I installed it and it seems to run smother than windows vista so far but it wont work with my wireless internet the light that shows it is connected doesn't even glow. I am using a Compaq Presario Labtop.
View 1 Replies
View Related
Apr 6, 2011
I checked task manager the other day and I discovered that on the network history monitor some bits and bites were transfered in a repeating pattern (like a beacon). The transfer rate (when active) is about 149b/s receiving. And about 70b/s sending. What is this?
No Internet-related program was running from my part...In an attempt to pinpoint what was causing this, I occidentally removed the tools located left and right on the time and date. I've rebooted since but still no tools. The 0/I button is also gone.
View 5 Replies
View Related
Jan 17, 2011
i have ubuntu last version installedand now i installed KDE and every thing is ok but when i want to creat a new VPN Conection I cant The Add Button Is Not Enabled Why is that i really wanna use KDE i like it really
View 4 Replies
View Related
Nov 26, 2010
Are there any instructions for setting up a wireless connection for 10.10?I do not know what to put for the following:
SSIS
BSSID
Device MAC address
Cloned MAC address
View 9 Replies
View Related
Aug 24, 2010
Both ivp4 and ivp6 activatedon wireless ide/cardhow to try a ivp6 connectionfor instance mirrors.mcs.anl.govfor they are supporting ivp 6so in general first try ivp6 then ivp4
View 1 Replies
View Related
Sep 25, 2010
installing driver for RTL8191SE network card. At the moment wireless conection on the PC does not work only wired network is operational.
View 9 Replies
View Related
Feb 18, 2010
i can't get a pppoe conection working over a wireless network,in windows I have to connect to the router first, and then put in my user and password to get connected, but i don't know how to do this on fedora, i get connected to the router through network manager, and ping is ok, but when i try to make a new xDSL connection i don't know how to make it work through the wireless network that is established and working with my router.
View 9 Replies
View Related
Oct 10, 2010
ive just installed ubunutu 10.10 and its connected to the internet via a wireless conection. However I would like to share the connection with an xbox 360 connected to the computer via a ethernet cable. I changed the method under ip4 in the auto eth0 wire connection to "shared to other computers" aplyed and restarted, however whenever the 360 tries to connect itll take a while and then say unable to connect. I also tried this using a ps3 and the ps3 says timed out waiting for ip address. Ive doen this on windows by bridging the connection and it worked without the use of a crossover wire. Would I need a crossover wire?
View 3 Replies
View Related
Jan 22, 2011
I have a generic P4 desktop computer with Debian Squeeze. Since instalation my wired ethernet connection will slowely slow down and then quit when surfing the web. Sometimes it seems worse than othertimes. If it fails I usualy can get it to come back back up by going to Network Connections and clicking on "wired connection"and them just closing the window. It will work for a bit but the conection will inevitably quit in a short time again. Interstingly it seems mostly a problem with web browsers as doing upgrades, package instalations, using SMXI and things of this sort do not seem to be a problem. I have tried both Epiphany and the Squeeze default Iceweasel with identical results. Also when using Google Earth a similar situation occurs in about 2 minuits of use. The same computer running Debian Lenny with Epiphany and WXP with the dreaded IE do not have this problem.
View 5 Replies
View Related
Feb 3, 2010
I am trying to install the livestream procaster on absolute linux. I've downloaded it and its a .exe file when i click it a mesage comes up that says "No run action specified for files of this type (application/x-ms-dos-executable) - you can set a run action by choosing 'Set Run Action' from the File menu, or you can just drag the file to an application."
View 4 Replies
View Related
Feb 14, 2011
how to use absolute sections in gnu assembler?
View 2 Replies
View Related
Aug 13, 2010
i have a usb modem 3g huawei k3520 that is installed on FC13 minimal only shellli have see that my modem is config with dmesg ....
now i want to create a conection to my provider on boot ... can anyone help me find the files where i create my conection and how can i make my modem to conect autom on boot...????
i m newbie and i don t no very well the shell....
View 3 Replies
View Related
Apr 11, 2010
does Slackware 13 64 come with internet proxy server? Or I need to download Squid separately?
View 2 Replies
View Related
Jun 12, 2011
What would be the minimum iptables rules for laptops that travel a lot, and might connect in potentially hostile networks? I came up with (log rules left out):
Code:
iptables -F
iptables -X
iptables -P FORWARD DROP
iptables -P INPUT DROP
iptables -P OUTPUT ACCEPT
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -m conntrack --ctstate INVALID -j DROP
[Code]...
View 7 Replies
View Related
Dec 20, 2010
I want to assign an address location to a pointer and wanted to display the value at that memory location.I wrote a small program for this and it is like this : (i am using gcc 4.4 compiler)
# include "stdio.h"
int main()
{
unsigned int *a;
a=(unsigned int *)0x3f8;
printf("%u",*a);
return 0;
}
But it is giving Segmentation fault
View 14 Replies
View Related
Jul 26, 2009
I get the following error when I try to boot vista thru grub. This is what I did, Got a new Hard drive installed it. Configured the bios to look at the new hard drive first. after installing vista on the new hard drive I switched the boot order and added the lines for vista(last 3 lines) in /boot/grub/grub.conf. I get the following the following error.I have to change the bios everytime i have to boot vista.
error 1: Filename must be either an absolute pathname or blocklist
#boot=/dev/sda
default=0
timeout=15
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.29.6-213.fc11.x86_64)
[Code]...
View 3 Replies
View Related
Sep 26, 2010
I need to extract the absolute directory from the type command when I pass it a program name. E.g.
Code:
>type cat
cat is hashed (/bin/cat)
There is one other case (I believe):
Code:
>type lpr
lpr is /usr/bin/lpr
I thought of using regex, but it returns the whole line, not just the match. In addition, there is no option cited in the man page for type that returns just the command directory.
Note: this is part of my solution to a programming assignment in bash shell scripting.
View 1 Replies
View Related
Jun 13, 2010
I wanted to read out the absolute file-path (filename) as sorted in a folder (on Linux). The reading the file-paths is ok but I have problems in sorting.
Code:
selectedDirectory = fl_dir_chooser ("Select Imagedirectory:",NULL,0); //This is just a widget to show the folder.
DIR *d;
dirent *de;
[code]....
The files -105.dcm, -106.dcm, -107.dcm lie in the folder at the bottom and -36.dcm, -37.dcm- at the top. The program compares 1 and 3 of 105 and 37, 1 is lesser than 3, then prints out first, but does not know that 105 is three digits and 37 is two digits.
View 1 Replies
View Related
Apr 6, 2015
Bizarrest thing after swapping in my HDD from an old laptop into a new one. My LXDE panel temperature display is showing "-273," AKA absolute zero in celcius. I've done a bit of googling for lxde temp sensor, and most of the discussions I saw referred to installing lm-sensors, which apparently I did not yet have, although on my old laptop the temperature was shown correctly. I believe the automatic sensor location is off and I need to give it the correct location manually. I am unsure of how to do that, and it makes sense that it's hardware specific. After installing lm-sensors, I saw that sensors-detect provides me with a list of the correct temp sensors in my computer, but I'm unsure how to save those results so the computer can use them.
View 5 Replies
View Related
Sep 24, 2010
Is there a way to cd directly from a symbolic link to the real absolute directory?
View 3 Replies
View Related
Jun 25, 2010
Ok so first off my hardware Asrock 775dual-vsta Master and Slave hard drives on primary IDE Absolute Linux 2.6.33.3 ; Dos 7.1 (yes Dos 7.1 by itself no windows whatsoever) Absolute Linux=sda1 ; Dos=sdb1
Ok so I can't boot into dos from lilo boot menu. It boots fine however if I tell the bios to boot from the second HDD first (DOS). But it's inconvenient to tell the bios every time on power-up to choose the second hard drive as the first boot device. Here is my lilo.conf boot section
# Linux bootable partition config begins
image = /boot/bzImage
initrd = /boot/initrd.gz
root = /dev/sda1
[Code]...
Either way when I boot from the first hard drive (linux hard drive) and lilo pops up, I select dos and hit enter then nothing... It just sits there and ctrl-alt-delete can't reboot my comp as it's frozen.
I don't wanna have to tell the bios to select my dos hard drive as my primary boot device everytime I wanna boot dos. I wan't my linux hard drive to be my primary boot device and have my dos hard drive selectable from the lilo boot menu. Why can't I do that? What am I doing wrong? I thought this was easier than dual booting from a single hard drive?
View 5 Replies
View Related
May 13, 2010
We have two paths. First one is directory, second either dir or file.
/a/b/c and /a/d/e.txt
Relative path from first path to second will be: ../../d/e.txt
How to get it in linux terminal?
PS: For those who ask "what is use case?" - creating lots of relative symlinks (just as an example)
View 1 Replies
View Related
Jun 17, 2011
I'm having some trouble getting my new copy of slackware connected to the internet. I'm new to slackware, so I'm not sure where to begin troubleshooting. So far, I've run netconfig and tried to set up a DHCP and a Static-IP connection, both to no avail. I know my internet connection is working since I'm currently using the same box with a hard-drive that has crunchbang on it. I've read chapter 5 of the slackbook up to the section on PPP and have thus far gotten lost in my /etc/rc.d folder looking at lottsa neat files.
Using ifconfig -a gives me information about an eth0, an eth1, and a lo connection thing. From what I understand from the book, this means that slackware has registered my network card but does not have the right configuration necessary to connect.
I tried getting information about my connection from crunchbang, which was as simple as right-clicking a certain icon and copying down my interface, hardware address, driver, speed, security, ip address, broadcast address, subnet mask, default route, and primairy DNS. Since setting up DHCP didn't work after startup, I assumed I was using static I.P. I put in my IP address, mask, default route, and DNS, but it has not yet connected.
View 14 Replies
View Related
Apr 25, 2011
I can't connect to Internet on Slackware. I've blacklisted the modules rt2800usb, rt2x00usb and rt2x00lib in /etc/modprobe.d/blacklist.conf.
View 6 Replies
View Related
Jun 27, 2011
I mostly do .Net development in a Windows 7 virtualbox. I use the host for simple things such as web browsing, skype, chat, etc. All things that are fantastically available on Ubuntu which I in many ways prefer. So this has been begging the question for a while: why even use Windows on the host, seems like a Linux host would use less resources (untested) and allow my Windows VMs to run better while allowing me to do my non-development stuff in an interface I prefer.
So easiest way to do this - I downloaded wubi and installed Ubuntu. I installed in it Virtualbox, and then start add and start my VM to get this message: Failed to open a session for the virtual machine VS2010, Could not open the medium '/host/Users/George Mauer/Virtualbox VMs/VS2010/C:/Users/George Mauer/.VirtualBox/HardDisks/VS2010.vdi; VD: error VERR_FILE_NOT_FOUND opening image file '/host/Users/George Mauer/Virtualbox VMs/VS2010/C:/Users/George Mauer/.VirtualBox/HardDisks/VS2010.vdi; (VERR_FILE_NOT_FOUND).
You see what's going on? With wubi, the windows drive gets mounted at /host/ but virtualbox is for some reason appending an absolute path! I would very much like to use the same exact VM file since it would retain Snapshots and I would be able to use it in either windows or Ubuntu mode. However, even if I try to simply mount the drives into a new VM I get an error: Failed to open the hard disk /host/Users/George Mauer/.VirtualBox/HardDisks/VS2010.vdi. Cannot register the hard disk '/host/Users/George Mauer/.VirtualBox/HardDisks/VS2010.vdi' {guid...} because a hard disk '/host/Users/George Mauer/VirtualBox VMs/VS2010/C:/Users/George Mauer.VirtualBox/HardDisks/VS2010.vdi with UUID {guid...} already exists.
This is especially odd since this worked fine with my recently created Android VM, though this might have something to do with the fact that VirtualBox recently changed their default VM storage locations. Any idea how to fix this? My Linux-fu is weak but I seem to remember from CS class something about symbolic links that might be relevant here?
View 1 Replies
View Related
Jul 31, 2010
Are there programs for this? Really really simple page layouts that you can edit and host from a graphical desktop that has your web browsers and Pidgen and VLC media player and everything running on it at the same time?
View 9 Replies
View Related
Oct 22, 2010
I have a Dell Vostro 1220, with Intel 4 Series Express Chipset Family graphics card. I work on OpenSuse 11.3 (64bit), on the latest kde.I work on an extended 1680x1050 screen on the left of my laptop screen (1280x800). I set this with Kxrandr and it worked great,a while... Now, it shows a black band on the right side of my laptop screen. I can live with that. But the mouse does not recalculate for this difference, so that I need to click 1 inch to the right of where I want to click.
View 2 Replies
View Related
Nov 20, 2010
I installed slackware on my pc and before i had internet (last time) But i have run networkconfig and nothing has changed. If anybody could help that would be awesome. Is there something i can do different from when i install.
View 14 Replies
View Related
