Ubuntu Networking :: Sharing Network Conection With Xbox 360?

Oct 10, 2010

ive just installed ubunutu 10.10 and its connected to the internet via a wireless conection. However I would like to share the connection with an xbox 360 connected to the computer via a ethernet cable. I changed the method under ip4 in the auto eth0 wire connection to "shared to other computers" aplyed and restarted, however whenever the 360 tries to connect itll take a while and then say unable to connect. I also tried this using a ps3 and the ps3 says timed out waiting for ip address. Ive doen this on windows by bridging the connection and it worked without the use of a crossover wire. Would I need a crossover wire?

View 3 Replies


ADVERTISEMENT

Ubuntu Networking :: 10.04 - Ics - Sharing With Xbox 360 ?

May 18, 2010

Ive got my laptop hindered up to my xbox 360 it has windows 7 and Ubuntu 10.04. i realy want to get rid of windows and the only reason i keep it around is because ics sharing works realy well for connecting to xbox live.

I recently discovered that you can (ics) with ubuntu which is awesome only problem is
i cant figure out how to set it up to stop it having moderate NAT so i can play games that require an open NAT. its probably due to the ports not being fowarded properly or somthing and/or the face that my xbox needs a static ip placed out side the routers firewall on the DMZ setting .

View 4 Replies View Related

Ubuntu Networking :: Internet Connection Sharing To Xbox?

Jul 31, 2010

i have searched and searched for an answer but nothing i've found has worked for me what i have is an old computer with 2 network cards in it the 1 conected to the internet is eth1 one connected to the xbox via crossover cable is eth2, what i'm trying to do is share the internet connection to the xbox using ubuntu,i've tryed alreadyusing the network manager,using firestarter,ip tables,even nat,and all have failedi've been using ubuntu for 4yrs now, and i have always before been able to find answers to my problems by simply googling the answer. but this is one i can't seem to find an answer on.

View 3 Replies View Related

Ubuntu Networking :: Xbox 360 Connection Sharing - DHCP Setup

Jun 17, 2011

I have a similar problem. My ubuntu box is set up as a dhcp router for my Xbox360, my xbox can get ip and DNS information from the computer, but it doesn't seem to get the right info. The ip address it gets assigned is out of the range I've set in etc/dhcp3/dhcpd.conf.

View 1 Replies View Related

Ubuntu Networking :: Using Laptop To Network With XBox?

May 16, 2010

My son has been using 9.10 and when he wanted to play on his XBox live, we just connected a ethernet cable to the Xbox and laptop then clicked on the wireless icon and clicked on wired connection and then he could play on his Xbox. But since upgrading to 10.04 this just will not work. We have tried with the XBox off and on, the wired connection connects but the XBox will not find the connection.

View 2 Replies View Related

Debian :: Sharing Internet To Xbox 360

Nov 23, 2010

Been trying for a couple days know to get my laptop to work with my 360 so I can use the internet connection from it so I can go online. I access the internet using my Nokia E72(ppp0) and I intend to use the laptop's ethernet port for the 360(eth0).

Tried this out [url] and a bunch of other guides which I can not find right now. Running Debian Testing and have no idea what to do next.

View 3 Replies View Related

Ubuntu Multimedia :: Sharing Media To Xbox 360 WITHOUT Using UShare ?

Dec 7, 2010

Is there another program I can use to share my movies to my 360? Ive tried setting uShare up numerous times, and always get errors. I tried uninstalling and reinstalling, and now I can even re-download it.

View 2 Replies View Related

Ubuntu Networking :: Will The Xbox 360 Wireless Network Adapter Work?

May 17, 2010

How do i get my xbox 360 wireless adapter to work on ubuntu?

View 2 Replies View Related

Ubuntu Networking :: Running Xbmc4xbox - Xbox 360 - Neither Of The Two Are Recognizing By The Network

Mar 27, 2011

I am using ubuntu 10.04 LTS. I have an modded xbox (original) running xbmc4xbox as well as a xbox 360 and neither of the two are recognizing by ubuntu on the network. For this post I will refer to the xbox (original) for simplicity I'm hoping.

O.K. I've tried a couple different things, and SUDO APT has become apart of my life, but once again not sure where or what is best & i end up trying them all. For instance Upnp, samba configurations, mediatomb. Also, when I go to Places>Network>Windows Network I receive this message "Unable to mount location Failed to retrieve share list from server" I dont know what to address first. And I'm not sure how to work those programs, for I'm a novice to linux computing and surly that part of the problem. But I have read scores of forums and post as well as ..... videos and my system is not doing what it supposed to do. I figure with the ubuntu desktop at etho0 and the down stairs xbox plugged in the same linksys router and another xbox up stairs connected through wireless adapter and they all connect to the internet fine I am even able to connect between both xbox's and share files. I should be able to see my network on ubuntu. But i don't. I'm completely stumped and have been at this for, well I embarrassed to say as I am a computer repair tech by trade. But I need help I really want to stream movies to my chidrens rooms and my new Apex 40" Class 1080p 60Hz LCD HDTV - Black (LD408

View 1 Replies View Related

OpenSUSE Network :: Setting Up An Internet Conection?

Aug 10, 2010

i got some bad virus on my windows and there is no way to remove it so i need to use linux some time till i find a way to remove the virus.I run a online test to see what linux distribution will be the best for my pc since i have very bad/old pc and i found this one.Everything was fine but when it come the part to get internet access it gone bad...I have adsl modem the model model is DSL-360R.This is how i create a internet access in windows.I open con.panel go to network conections and there is a local area conection icon.Right click/properties the select Internet protocol(TCP/IP) and click install i enter thoose numbers(given by my net provider) Ip address: 192.168.1.2 and etc...(If you need the other numbers i will tell you.).

Then i create a new conection.I use a manual login i have username [URL] and password like 2003.I need to get internet on my linux.I aredy called the support of my operator but thoose noobs said they dont support linux and the man was kindly and said somethink about drivers and said to try somethink with spconfig or somethink like that i dont remmber all i know it didnt worked.That is it i tell you all i know and i hope that u can help me and tell me how to create a new connection. P.s my first impression from openSUSE> The os looks great, i love the instaled theme.

View 7 Replies View Related

Ubuntu :: Xbox 360 Downloads From Xbox Live?

Apr 20, 2011

I were to download a demo from [URL] would it save the demo to my laptop and then I could transfer it to my Xbox via Ethernet cable, even though my laptop has Ubuntu on it or does it have to be Windows computer?

I ask, b/c either way it is just a file on my laptop, regardless of the OS.

So, what does the community think?

View 1 Replies View Related

Ubuntu Networking :: Printer Sharing Across The Network?

Jan 6, 2011

i have a printer which is shared across the network. All the computers have ubuntu installed. I want that some computers should not be allowed to use this printer.

View 8 Replies View Related

Ubuntu Networking :: Sharing The CDROM Over Network

Mar 28, 2011

I seem to be having difficulties sharing a CDROM... Here is where I am at: My smb.conf section looks like this

Code:

[cdrom]
comment = Samba server's CD-ROM
read only = yes
locking = no

[code]....

My fstab looks like this, (as directed in smb.conf)

Code:

# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation

[code]....

I am trying to read the CDROM with a Windows 7 netbook.My mount folder has the following permissions:

Code:

dr-xr-xr-x 1 root root 2048 2007-10-10 01:00 samba

View 2 Replies View Related

Fedora Networking :: Configure A Pppoe Conection Over Wlan0?

Feb 18, 2010

i can't get a pppoe conection working over a wireless network,in windows I have to connect to the router first, and then put in my user and password to get connected, but i don't know how to do this on fedora, i get connected to the router through network manager, and ping is ok, but when i try to make a new xDSL connection i don't know how to make it work through the wireless network that is established and working with my router.

View 9 Replies View Related

Ubuntu Networking :: Setup Network Sharing Between 9.10 And Vista?

Mar 7, 2010

Trying to set up network sharing between Ubuntu 9.10 and Vista. I already did this with a wired Ubuntu 9.10 desktop and my Vista laptop but for some reason my Ubuntu 9.10 wireless and Vista wireless aren't as easy. They are all on the same workgroup "MAGIC" and I can see my ubuntu shares on the Vista computer but can't see the Vista shares on the ubuntu computer. In ubuntu I go to network>windows network>MAGIC but it times out at the MAGIC workgroup part and says 'unable to mount'.

[URL]

but no luck I also checked and there isn't a firewall that's in the way.

View 3 Replies View Related

Ubuntu Networking :: File Sharing Within Home Network?

Jul 28, 2010

For the first time networking my home computers I'm not interested in getting Ubuntu boxes to to talk to Windows and we now have Ubuntu on all machines.

I'm trying to use the "Personal Files Sharing Preferences" but there is a message telling me I require some packages. Most unlike Ubuntu but it doesn't tell me what packages I do need.

Uploaded with ImageShack.us

What I would really like to do is have access to sertain directory's on other computers and have full access to read/write within the home directory.

View 6 Replies View Related

Ubuntu Networking :: Sharing 3G Connection Using Adhoc Network

Aug 4, 2010

Here's the setup:
I have 2 laptops:
1. Dell Inspiron 8600 with an intel 2200BG wifi card (Ubuntu 10.04)
2. Asus eeePC 1000 (Ubuntu 9.04)

Internet setup:
Laptop 1 connects to a 3G connection and shares it with laptop 2 using an ad-hoc network.

I upgraded to Lucid on Laptop 1. Prior to the upgrade everything was working. Now, when laptop 1 tries to connect to the ad-hoc network it almost immediately disconnects and tries to reconnect again.

Ad-hoc network settings:
The ad-hoc network uses a WEP key. In IPv4 settings, "Share to other computers" is selected.

Dmesg output:
Code:
are: requesting ipw2200-bss.fw .....
** (nm-applet:4259): WARNING **: _nm_object_get_property: Error getting 'Default' for /org/freedesktop/NetworkManager/ActiveConnection/327: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:4259): DEBUG: going for offline with icon: notification-network-wireless-disconnected

View 9 Replies View Related

Ubuntu Networking :: Sharing Internet Network Manager ?

Jan 3, 2011

I used network manager to share internet connection coming to wlan0 with eth1.

I have internet in my PC coming to wlan0 and I want the client I hook to eth1 to have internet too.

It works with network manager but I think it added something I didn't ask for... Apparently the client connecting to eth1 is recieving an IP from a DHCP server outside the range of wlan0 IPs.

How can I configure eth1 to assign an IP that is inside my wlan0 LAN or at least give a static address to eth1 client that's inside my wlan0 LAN and internet keeps functionning.

View 1 Replies View Related

Ubuntu Networking :: Sharing Dial-up Network Connection?

May 30, 2011

i connect to the internet on my laptop using a usb modem. i want to share this connection with other computers. connected through lan cable. i want to manually assign ip on all computers. what should i do

View 3 Replies View Related

Networking :: Network - Sharing File - When Run Ubuntu Cant See Drive

Feb 14, 2010

I recently installed Ubuntu with partion with Vista, and I am enjoying the Ubuntu experience will buy a book and learn this awesome OS, my question is this:

My wife has a laptop that runs Vista, and when i use my Vista she can see my files and I share this hard drive with her, but when i run Ubuntu she cant see this drive, i have extrernal hard drive as my backup with lot of different files on it and she can pull files from it but when i use Ubuntu she can see on her Vista Network, how can i make so when i use Ubuntu she can see my drive? On my Windows i set up sharing of files but how do the same with Ubuntu.

View 1 Replies View Related

Networking :: Wired Ethernet Conection Deminished On Debian Squeeze?

Jan 22, 2011

I have a generic P4 desktop computer with Debian Squeeze. Since instalation my wired ethernet connection will slowely slow down and then quit when surfing the web. Sometimes it seems worse than othertimes. If it fails I usualy can get it to come back back up by going to Network Connections and clicking on "wired connection"and them just closing the window. It will work for a bit but the conection will inevitably quit in a short time again. Interstingly it seems mostly a problem with web browsers as doing upgrades, package instalations, using SMXI and things of this sort do not seem to be a problem. I have tried both Epiphany and the Squeeze default Iceweasel with identical results. Also when using Google Earth a similar situation occurs in about 2 minuits of use. The same computer running Debian Lenny with Epiphany and WXP with the dreaded IE do not have this problem.

View 5 Replies View Related

Networking :: Sharing Network Using Crossover Cable?

Feb 14, 2011

At the outset I would like to tell everyone that I am still relatively a newbie in linux. I use a usb mobile broadband data card to connect to the internet, and I recently purchased another desktop for my wife. Both of us do not share any files, but I do not have a router and was wondering if I could share my connection with her using a crossover cable.I did a lot of Googling around and tried various different things, I even followed another thread in the same forum but the most that I have got is my network manager saying that connection has been established. I am however not able to see her computer under my windows network and don't know how to proceed.I don't know where I am going wrong, and considering that my knowledge of networking is at below basement level, I would really appreciate any help in this regard.

View 2 Replies View Related

Ubuntu Networking :: Connection Sharing With Network Manager And Dnsmasq?

Jan 1, 2010

how to change the IP range provided by default by Network Manager / dnsmasq from 10.42.43.-- to something else?

I have setup a working network using a Bell wireless modem (Canada) and Network Manager in 8.10, 9.04, and 9.10.to do Internet connection sharing. In 8.10 the only way I could get it to work was with WICD and KPPP, many hours spent on this one. I got it to work in 9.04 and 9.10 using network manager, but certainly not out-of-the-box. If someone would like some tips on how I did it, in each case, let me know.

My current challenge is trying to set the dhcp range of dnsmasq (which I am 99% sure is what is handing out addresses) from th 10.42.43.-- address range to a 192.168.0.-- range.

I HAVE edited /etc/dnsmasq.conf and can get the edits to this file to break the setup (dnsmasq will not start) but have not been able to get it to change the IP address range.

It seems that either this file is ignored, or overridden by some other process. I have looked at the very good post at [URL] about dnsmasq but this does not do the trick.

By the way, the way I can get this to work is to start NM, establish my cellular internet connection, then kill dnsmasq then establish my ICS network (on eth0). If I don't kill dnsmasq, then it does bring up the connection, but it then shuts down in a matter of seconds. It is all very manageable using a launcher (kdesudo pkill dnsmasq) on the task bar, but not all that elegant.

the IP range and where this is provided to Network Manager or the network itself is my real question now.

View 7 Replies View Related

Ubuntu Networking :: Setting Up File Sharing In A Home Network?

Jan 6, 2010

have a home network with two desktops and I also have a netbook. The netbook and nettop (desktop) both run UNR 9.10 and my other desktop runs Ubuntu 9.10 with all updates in place. So all 3 machines are hooked up to my home network via wireless router (secure and password protect). I want to set up file shares between machines in order to move files between machines and also to have all machines connected to and accessing one shared printer. Fair enough. According to Ubuntu help I click on a folder, then properties then the share tab and click all checkboxes and give the share a name. Then I do likewise on my two other machines. So in theory once every machine has a share setup then you should be able to access via the other machines by simply going into Network, finding the machine, opening it and mounting the shared folder. In some cases I see the other machines but when I click to open them it says "unable to mount location". So now I would like to ask... where should I look to resolve this? The wireless router settings? Some type of network or security settings on each of my machines?

View 6 Replies View Related

Ubuntu Networking :: How To Find Network Password For Windows Sharing

Feb 26, 2010

I've looked at all 250 threads that come up when I search "Windows network password" and can't seem to find the answer. On my win7 box, when I try to connect to an Ubuntu share on my ubuntu box, it asks for username and password. I have tried my ubuntu username and password, the windows networking password, and my win7 user account name and password, and I cant get in.

View 1 Replies View Related

Ubuntu Networking :: Sharing Network Connection From Laptop To Desktops?

Nov 21, 2010

I got a laptop with wireless. Next to it I got 2 desktops, neither of which have a wireless card and I don't have any usb wireless adapters or anything. I do however have an ethernet cord. In the past I was able to set my eth0 connection to be "shared to other computers", then from my laptop I could run the patch cable to the desktop and voila, internet to the desktops.

For some reason though, now whenever I try to connect from the desktops, there are 2 green circles and a little blue circley thing going around them. it spins for a while and then says disconnected. Also, now if (on my laptop) I connect to the wired network, my wireless stops working. I'm kind of stumped here, I tried deleting both connections from both computers, setting everything up again, and connecting, and I get the same problem. Also seeing as how I'm trying to troubleshoot this from my laptop and watch this thread, I can't exactly mess around with it much right now or I won't see any replies.

View 5 Replies View Related

Ubuntu Networking :: Sharing Internet/LAN Eth0 Connection Via Wi-fi Ad-hoc Network

Dec 1, 2010

I've got access to my LAN and the Internet via my wired ethernet connection. I'd like to share that access with my iPod Touch (device shouldn't really matter) via an Ad-hoc wi-fi network.

This tutorial in the docs seems to describe the right setup but is very out of date (7.04). Instead I found this tutorial and followed it to create the Ad-hoc wireless network. I was able to connect my touch to the resulting ad-hoc network without a problem, but I didn't have LAN/Internet access.What's the next step to get the clients on the ad-hoc network out to the Internet?I found this page in the docs that says I'd need to install dnsmasq-base and uninstalling dnsmasq. I checked and dnsmasq-base is already installed but dnsmasq is not. I do have dnsmasq in /usr/sbin but the package description makes it sound like this should come with dnsmasq. Is the page out of date? Will uninstalling dnsmasq cause other problems?

View 9 Replies View Related

Ubuntu Networking :: Sharing 10.10 Network With Win7 Over Cat5 Cable?

Mar 6, 2011

Im a long time Ubuntu user (since 5.04), but networks were never my speciality, I have a desktop running 10.10, connected to the internet trough a US robotics modem (connection eth1), and i want to share its network with my laptop running win7, over a cat5 cable (connection eth0), but the problem is I dont seem to understand what i am doing wrong, what the missing steps required, or in which end is the problem (either ubuntu or windows side).

From what I could grasp was needed googling about the subject, i already set the eth0 connection to share with other computers (in network manager edit connections auto eth0 ipv4 configuration set to share with other computers). Also using the cli set eth0 for static ip using :

Code:
sudo ifconfig eth0 192.168.0.1 Now the question is what i am missing? or is everything needed already done and i just have to properly configure the win7 side (which i already checked several times)?

Here is my ifconfig output:

Code:
eth0 Link encap:Ethernet Endereo de HW 00:01:29:a6:55:fe
inet end.: 10.42.43.1 Bcast:10.42.43.255 Masc:255.255.255.0
endereo inet6: fe80::201:29ff:fea6:55fe/64 Escopo:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Mtrica:1

[Code]...

View 2 Replies View Related

Ubuntu Networking :: Public Files/network Sharing Not Working?

Mar 21, 2011

So I want to put some of my folders on my network. I open up nautilus and go to my home folder and right click -> properties-> share and then selected share this folder, made it so that others could modify stuff on it and have guest access (which is what I want), and changed the share name to "home". Then I clicked create share. I then went to Places->Network->******'s public files on [the name of my computer]. But then some stupid error message popped up saying:

"DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)"

View 7 Replies View Related

Ubuntu Networking :: Change Ip Address Of Second Internet Sharing Network Card?

Sep 2, 2010

I have a second network card in my ubuntu desktop that I have sharing my internet connection with a wireless router. I have set the router to a static ip address within the network cards range. But, every time I restart the computer, the network card uses a different ip address. One time it will be 10.42.43.1, the next time it will be 10.42.46.1, ect. This makes me have to hard reset my router every time it does this. How can I set the network card to use the same ip address all the time?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved