Ubuntu :: Setting Up A Wireless Dhcp/dns Server On Laptop?
Nov 4, 2010
I'm interested in the possibility of setting up a sort of hotspot using my laptop that will act as both a DHCP and DNS server in the hopes of running a softroot on my Nook e-reader.
According to the instructions posted here: [URL] I need to use Windows 7 and a couple different applications. Windows 7 is not an option for me, as I have Ubuntu Netbook 10.10 installed and would like to keep it that way. Can anyone offer any clues as to what I would need to use?
View 1 Replies
ADVERTISEMENT
Apr 22, 2010
I'm kinda new to this. I've had my laptop dual booted with vista and Ubuntu for about a year. I'm just now starting to configure Ubuntu for a DNS and a DHCP Server.
View 2 Replies
View Related
Jan 19, 2010
I'm trying to get a dhcp server running on my laptop. I want devices to be able to connect to a wireless AP I've set up (using hostapd) to then connect to the rest of the internet via my ethernet connection from the laptop.
However, I can't get dhcp to work properly. It always fails, leaving this message in the syslog
Code:
Jan 19 15:49:15 lucid-laptop dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
Jan 19 15:49:15 lucid-laptop dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
[Code].....
View 2 Replies
View Related
Aug 24, 2010
I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?
View 4 Replies
View Related
Jun 15, 2011
I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
View 3 Replies
View Related
Feb 13, 2011
having a very specific problem setting up the wireless card in my Dell Inspiron 1545. The card's description under lspci is this:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
I have the required drivers from this website: Broadcom.com - 802.11 Linux STA driver As far as I can tell I have followed all the instructions given by the readme, I have all kernel packages that I had understood to be required but when I try to make the Makefile I am given this:
borgs0@linux-yjl1:~/hybrid_wl> make
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
make[1]: Entering directory `/lib/modules/2.6.34-12-desktop/build'
make[1]: *** No targets specified and no makefile found. Stop.
make[1]: Leaving directory `/lib/modules/2.6.34-12-desktop/build'
make: *** [all] Error 2
View 5 Replies
View Related
Jul 18, 2011
I want to practice setting up of NFS server and NFS client on Redhat using virtual machine on my laptop. I dont think setting up NFS should not be a problem but how do I replicate a NFS client. I just have one laptop. Is it possible to replicate both server and client using the same laptop? If so, can anyone tell what tools i can use to perform the above for practicing.
View 3 Replies
View Related
Feb 12, 2009
I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.
I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.
View 14 Replies
View Related
May 24, 2010
I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
View 1 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
Aug 4, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Oct 26, 2010
Security Type: WPA2-Enterprise
Encryption Type: AES
Network Authentication mode:
Microsoft: Protected EAP (PEAP) - Unvalidated Server Certificate
User must authenticate log-on. Its a wireless network. how to set this up for Ubuntu.
View 3 Replies
View Related
Mar 1, 2010
Can I run a laptop as a wireless server? My friend runs his laptop off of his cable box and does not have a multi-port router. How can I have his laptop wireless act as an access point?If I can't be wireless, how do I have his laptop act as a server through a usb cable to my laptop?
View 9 Replies
View Related
Aug 14, 2010
I've been having issues setting up the wireless interface on my Ubuntu server (command-line only, no GUI) and I can't seem to get it working. It seems as though the card is recognized, the drivers are installed and the interface is up, but it fails to connect. I have no idea where I'm going wrong. I have WPA and a MAC filtering setup on my wireless router. An exception has been made for this PC's MAC address and I've manually entered the connection details into /etc/network/interfaces.
[Code]...
View 2 Replies
View Related
Feb 15, 2010
Due to me not remembering how my father set up the DHCP in my FreeBSD server (Files etc) i could not input the corrent info while i was installed Ubuntu 8.04 (LTS) server edition (32 bit). Could anyone be nice enough to tell me what i need to do, or what files to edit so i can access the internet from it?
View 9 Replies
View Related
Jan 24, 2011
This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies
View Related
Feb 24, 2010
I want to make a server that I can log into from my lap top over wireless and access virtual machines, and server terminals. VPN over ssh maybe? Is there a fedora server edition i can use and does it have the required capabilities?
View 3 Replies
View Related
Apr 16, 2011
I have Debian installed on my laptop. When the laptop is connected to the network via ethernet cord, I can ssh into it fine. However if I switch to wireless, I can no longer SSH in.
I have confirmed SSHD is running.
I am switching between wired/wireless by editing /etc/network/interfaces and re-booting the laptop.
The laptop can connect to the internet, and SSH into other computers on the LAN just fine with either connection. But they can't connect to it when it's wireless.
When it's wireless, the laptop can SSH into itself as well.
My iptables is set to allow everything.
They're both on the same subnet.
View 15 Replies
View Related
Apr 30, 2010
I tried to setting a static ip from dhcp, I changed lines in /etc/rc.d rc.inet1.conf as follow:
# Config information for eth0:
#IPADDR[0]=""
IPADDR[0]="192.168.18.7"
#NETMASK[0]=""
NETMASK[0]="255.255.255.0"
#USE_DHCP[0]="yes"
USE_DHCP[0]=""
DHCP_HOSTNAME[0]=""
and then I run "/etc/rc.d/rc.inet1 restart"
after that, can't access net, and couldn't ping the gateway[192.168.18.1], I have to change it back
View 4 Replies
View Related
Oct 21, 2010
I know there are tons of help guides out there for this, and I have looked at and tried them all. I am trying to do something really simple, and just can't seem to get it working. I have been trying on and off for the better part of a week now, with not much luck. What I am tyring to do is have a Ubuntu 10.10 server serve out DHCP addresses and be the DNS for the local network. The local network will have no internet access, so it only needs to know the names of the local server. My network setup is as follows:
1: Windows Vista web server
2: Ubuntu DHCP3 and BIND server to give IP's and resolve local names.
3: A bunch of tablet computers connected via dhcp to the network, that need to access the web server on the Windows machine.
I have DHCP working nicely, but it fails to propagate the hostnames to the tablet computers. Unfortunately I need this to work, as the tablets do not have the capability of having a 'hosts' file.I have tried just about every self-help guide I can find, and just can't seem to get this work. Everything seems to work fine except for the name resolution. Any help would be great, I don't have that much hair left to pull out!
View 5 Replies
View Related
Apr 3, 2010
I'm maintaining a very modest network at home, with OpenSUSE as OS on the server. I got the DHCP and routing working by following the instructions in the wiki. However, every time I run dhclient on the server/router, it appears my own DHCP server assigns an address to the internal network card despite the fact I specifically assigned it to be static using Yast. The situation resolves itself when I restart the network services with the command /etc/init.d/network restart. Otherwise no problem, but it also seems the internal network card gets a "new" IP from my server every time the external card requests one from the ISP. This is more of an issue.
View 5 Replies
View Related
Aug 30, 2010
I have tested several Linux Distros over the last weeks, and with all of them my DSL connection have been working out of the box (for intance Mandriva, Ubuntu, Mint). But it does not work on Dreamlinux, neither on Live CD or now where Dreamlinux is installed on my harddisk.
According to the guidelines provided by my Internet provider I need to use TCP/IP and activate DHCP. And make sure that PPPoE is not activated.
I see nowhere I can do this in Dreamlinux. In the controle panel i can run Wicd. Then I can chose to de-activate Wicd - this gives me an option of entering Adress, Networking mask, Gatway and Nameserver - for static ip it says - and this is the opposit of DHCP, right??
SO - what to do? Should I get a debian package or something? (Dreamlinux is using debian packages, as far as I could see)
View 1 Replies
View Related
Jan 2, 2011
My DHCP setting is disabled in fedora 12 . Previously i was using static IP address. I Want DHCP setting enable, any idea.
View 1 Replies
View Related
May 1, 2010
I bought an RTL8187L USB wireless adapter, and have had trouble getting it to work. I have managed to get it to work via manually configuringtime, but lost that configuration, and now it is once again not workingThe root issue appears to be (if I'm understanding correctly what I'm seeing) that when I connect, routes don't get setup properly, so when network manager (or WICD, which I've also tried) get to the DHCP step, my wireless router can't be reached by dhclient.
This is on Ubuntu 9.10, and I'm using the updated driver from realtek.com, btw, though the in-kernel driver was exhibiting the same behavior.So, two questions:- Is anyone familiar with this problem, and is there a fix available?- I believe I can work around it by setting up routes manually (e.g. with a post-connect script in WICD), but after staring at the "route" manpage, I'm not 100% sure of the commands. My router (a FIOS MI424WR) is my DHCP server, and is at 192.168.1.1, and route -n on a working PC (wired connection) gives:
Code:
dave@MinasTirith:~$ route -n
Kernel IP routing table
[code]....
View 1 Replies
View Related
May 20, 2011
Environment
Linksys WRT54G Wireless
Laptop wireless Windows/XP
Windows/XP Hyper Terminal
Desktop Server Linux OEL 5 (not wireless) cable connected to the WRT54G router port. (I can go to the Internet with this server, but not able to communicate other computers on the WRT54G Wireless Network. Even though, the Linux Server is connected to the WRT54G router port.) From the Hyper Terminal Wireless laptop Windows/XP, I want to connect to my Linux Server.
View 1 Replies
View Related
Aug 18, 2010
In 11.3, if in "/etc/sysconfig/network/ifcfg-eth0" i set DHCLIENT_SET_DEFAULT_ROUTE="no" this seems to have no effect. If i start my box, the routing table has the "default route"-entry offered by a remote DHCP-Server. More Info: My Susebox has eth0 and eth1 and both network devices should use DHCP4. But from DHCP-offer on eth0 i want to use
* "offered IP-Adress for eth0"
* "offered NTP-Server"
* "offered Host-Name"
From DHCP-offer on the eth1 i want to use
* "offered IP-Adress for eth1"
* "offered DNS-Servers"
* "offered Default Route"
View 1 Replies
View Related
Jan 11, 2010
I'll try not to be too wordy. Want to get my openSUSE 11.2 (fresh install) laptop to see my network shares ...not to be a server or share any files. I've looked at 50 websites and everything seems to be "server" and "share" oriented. Maybe I (newb) am confused by the terminology...
I have a router that provides DHCP. My LAN PC's consist of a Vista laptop, an XP DAW, and a Kubuntu file server. Somehow I got Kubuntu configured properly, all of the Windows machines can access it and vice-versa. The Kubuntu smb.conf does not work on this laptop, and it seems overkill -no shares needed here. And yes, I get DHCP and interweb on the laptop -posted this with it.
All I want is access to my (other) network drives from this (openSUSE 11.2) laptop. Not a server, not to share. This is easy... right? It's driving me nuts Is there a Samba configuration that will let me jump onto networks and surf Windows/Samba shares like any old Windoze box browsing Network Neighborhood? Do I have to be a Samba guru?
View 7 Replies
View Related
