After setup Openldap server with TLS/SSL use ldaps, I install phpldapadmin and have an issue LDAP Server is configured and running. make some ldapsearch and it oki. I couldn't use https to browse LDAP server when I use http and I can't connect Could not start TLS. check your LDAP server configuration. This is my config
[Code]....
I have set up certain portions of my web site to be forced https:// How do I force, non https:// protocols. I know this sounds confusing, so let me give you an example.
[Code]...
I had installed apache previously on my system, and I think I uninstalled it completely, although remnants might have remained. I have just installed zend server ce php 5.3, and I am having trouble getting it to work. When I log in to the admin interface, it told me it couldn't start the webserver, so I go to restart apache, and it gives me this:* Starting web server apache2 Syntax error on line 6 of /etc/apache2/sitesenabled/zendserver_gui.conf:Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configurationThis has to do with php_mod some how... but I am not sure how to fix this, or where to start, since I am relatively new to actually setting up apache.I thought this might have something to do with libapache2-mod-php... so I went to reinstall it, and ran this:
mburns@mb2449-laptop:~$ sudo aptitude install libapache2-mod-php5
Reading package lists... Done
Building dependency tree
[code]....
How to start https on FC10?[root@smartgateway conf]# openssl versionOpenSSL 0.9.8g 19 Oct 2007
View 1 Replies View RelatedI can not log into our servers at work, Citrix, so; How do we use a https with Firefox?
I have Citrix Receiver installed, but one of the IT guys from work said to un-install it! How do I do that? and then they want me to load Cag from the web site...how do I do that?
Yesterday I put Win7 back on my pc at home - damn shame - and I was able to log into work through Internet Explorer, by putting the website in the trusted zone.
Am I supposed to do something similar with Firefox?
I found this on the net, and have done what it says...
Select a setup option:
1. Install Citrix Receiver for Linux 11.100
2. Remove Citrix Receiver for Linux 11.100
3. Quit Citrix Receiver for Linux 11.100 setup
Enter option number 1-3 [1]: 2
Please enter the directory containing the Citrix Receiver for Linux installation [default /usr/lib/ICAClient] or type "quit" to return to the menu:
The file is in fact the default, but I can't get the string to work!
I have a site called http:[url]....configured in apache virtual hosting.Is it possible to make it use https like the below https:[url]....
View 1 Replies View Relatedhow to setup ajaxterm without https. i want to use it as [URL]
View 1 Replies View RelatedA while back, I put a site up under a LAMP setup, and followed a guide from ubuntuforums that I googled to set up SSL encryption for the site.
That site works great, but since then, I've added some other sites to the same LAMP server. They load fine as well, but if I type in https:// before going to the latter sites, the browser attempts to redirect to the first, and warns that it is a fraudulent certificate, and that I'm at risk by going to the site.
Obviously, it isn't an attack site, the certificate is just set up for only one domain. How do I prevent my non-SSL sites from redirecting to the SSL-encrypted site?
A few days ago I installed a new SVN server using ubuntu 10.04 server editiopn at our company and it runs almost flawlessly. Almost that is. The server uses a self-signed certificate so all communications go over https. The strange thing is this. When I run some svn command from my (windows) pc, like update I get asked whether or not I want to accept the certificate. Then I choose "accept permanently" end all goes well. In future command I don't get that question anymore. But when my colleague does the same from his pc, he also gets the same question. Now, when he chooses "accept temporary", all goes smooth. But when he chooses "accept permanently", like I did, he gets an error saying:
RA layer request failed
svn: OPTIONS of 'https://path_to_some_repo': Could not read status line: An established connection was aborted by the software in your host machine.
Of course I googled on this and could find two things: Server settings are wrong
there's something wrong with the firmware of the router. The first couldn't almost be the case since it works for me and I followed the manuals. The second one couldn't be it either because when I log in with my account on my colleague's pc, it works. This is also the case when he logs on to my pc. So the problem exists specifically when he is logged in on his own pc. The setup of this machine is exactly the same as mine.
I am trying to get name based virtual hosts all running on HTTPS (port 443) so I can run multiple sites on the one IP.
The DocumentRoot needs to be different for each host.
[URL]
However, I am unable to find where to actually enable these hosts in the configs. The apache website says to put it in httpd.conf however that file is empty on my machine.
The existing default virtual hosts are in "/etc/apache2/sites-available/default" and "default-ssl"
The main config file is /etc/apache2/apache2.conf
I am running version 2.2.16 of apache
I need to use the same .htpasswd file for all the sites.
I have configured CNAMES on my domain for all of these hosts.
What is the best way to go about setting up multiple virtual hosts on the same box, one using http and one using https/ssl? I'd like to serve them from the same ip address if possible; I know it's possible in apache 1.3.
View 2 Replies View RelatedI blocked facebook and ..... but if any one change the http with https its open with him how can i mange https like http.
View 9 Replies View RelatedNot sure what this means, just installed CentOS 5.5 i386 on an older Pentium 4 desktop with an ATi Radeon 9200..
What information do I need to supply to get this issue sorted out?
I just installed the Ubuntu Studio packages on "normal" Ubuntu, 10.04 -
[code]...
I'm trying to run this on a Dell Mini 10v netbook.
im sure that my graphic card is good but after i installed the compiz manager ....the system failed to start the xserver this is the xserver output :
x.org x server 1.7.5
release date : 2010-02-16
x protocol version 11, revision 0
[code]....
in my centos5.3 i am able to login in terminal but while logging in gui shows error as follows-- Couldn't start x server on card 0 i fired the command as follows- yum groupinstall "X Window System" shows illegal instruction
View 3 Replies View RelatedI am a squat on advanced Apache work. I would get a basic SSL functionality to work. So URL...works fine and gets me all the login windows I designed. however currently all the images and other extensions like .pdf are also using the https routing.some image referred on that https link e.g. URL...can be displayed using https but not http.I would like to JUST limit https usage to the login window html and ALL other images pdf's not secured html ( one that do not need password ) should use HTTP NOT HTTPS.
View 6 Replies View RelatedI've got a basic apache2 setup running w/ multiple virtual hosts, would like to try SSL (i.e. https).
I've got the IP networking side well and truly sorted but I need guidance on the apache/ssl config side. I have installed mod_ssl.
Does anyone have a good guide for Fedora that's recent? All I can find are ubuntu and old fedora 'core' guides, so not sure how much applies to F12. The best ones I can find so far is
https://help.ubuntu.com/community/fo...er/apache2/SSL
http://httpd.apache.org/docs/2.0/ssl/ssl_howto.html
I have 2 web server in my office : http and https. You will find attached the httpd.conf and ssl.conf. I can acces the https server from home, but not the http one.
What I did :
configure the router to forward port 80 to my fedora 11 machine
open port 80 with system-config-network
created a virtualhost
The same exact steps have been done for port 443
I can access both server locally but only the https server remotelly.
Here are my iptables :
Code:
you can try to acces my servers using [url]
I made httpd to listen to port 8080, and done all the port forwarding/opening stuf, and it works. so is it a bug ?
Finally found my error seams like turning off UseCanonicalName to off did the trick
I really think it's a bug now. It was definitively working last week, I just added content to the main host of my website, and now i can't acces it from port 80. If someone think it's not a bug or find someting missing/wrong in my conf file.
i have an old fc4 server running ldap, and decided to upgrade to fc5, to use the new versions of ldap. after the upgrade the ldap wont start.i manage to restore my database, copy the DB_CONFIG.example to the var/lib/ldap and set the corretc path of the pid files in slapd.conf, but now the server just dont start and gives me no error messages...half of the guys here at work are not working cause of this.
View 5 Replies View Relatedi'm new to Debian os and currently want to install php5 apache2 and mysql 5.1. But ive got problem to start the mysql services.The error on command prompt as belows:
[Code]...
I can't browse my SAMBA shares because ports between 137 to 139 and 445 are closed, but I don't know why.
I even turn off iptables
Code:
But...
Code:
I've set up smbd 3.4.7 on 10.04x64 LTS server. I've set up a couple shares and I'm having problems blocking access to certain directories using native file permissions. There is one directory that has folders for each sales rep to store their current list of quoted clients, I only want sales people to be able to browse the directories owned by themselves. Everything seems to be set up correctly in terms of user groups and permissions on the filesystem.
Below is marina, a sales rep, and brian, a super user of sorts.
id marina:
Code:
uid=1011(marina) gid=1006(office) groups=1006(office),1005(sales)
id nick:
Code:
uid=1000(brian) gid=1006(office) groups=1006(office),118(admin),1001(full),1002(processing),1003(management),1004(it),1005(sales)
Below is the directory with all the sales reps folders.
ls -la:
Code:
total 60
drwxrwxr-x 15 root it 4096 2011-02-10 20:06 .
drwxr-x--- 9 root office 4096 2010-11-19 12:40 ..
drwxrwx--- 13 katya full 4096 2010-12-07 12:36 Katya
drwxrwx--- 18 lana full 4096 2011-02-08 17:09 Lana
drwxrwx--- 23 marina full 4096 2011-02-10 18:09 Marina
drwxrwx--- 4 mike full 4096 2011-02-01 12:42 Mike
With this setup marina only be able to browse her folder, but she can browse all folders and has full write access to all folders. This leads me to believe something is up with the smbd.conf file, which is below.
Code:
[global]
workgroup = COMTREAD
null passwords = no
server string = Root Server
dns proxy = no
log file = /var/log/samba/log.%m
max log size = 1000
syslog = 0 .....
In this case the valid users directive would not work cause I am not making a share for each user. I had this on other shares like the db2 share. My windows box lagged heavily when I tried to access that share with an invalid user. How to deny users the ability to modify permissions I would also like to do that.
I just setup an application (phpcollab) on a linux machine, I was able to browse the app using localhost, but each time i try browsing it using the ip address, a blank page loads with a message saying "No input specified".
Whenever I try browsing the app from other systems on the network, I get a page cannot be found error message even though the other machines are successfully pinging the linux machine's ip address.
I need to browse it with the ip address because the app is to be accessed from other machines on the network.
I tried to browse my home dir but I can not. I chown also with loek:loek /home Here is my sambaconfig:
[global]
workgroup = MYNETWORK
netbios name = LINUX
security = SHARE
log file = /var/log/samba/log.%m
[Code]....
I am using preupgrade to update Fedora 9 -> Fedora 12 following these steps: -
Code:
yum -y update
yum clean all
yum install preupgrade
preupgrade-cli
preupgrade-cli "<FEDORA VERSION>"
reboot
I successfully upgraded this box from Fedora 6 => Fedora 9 and I guess I got too confident when this worked without a hitch and went straight from Fedora 9 => Fedora 12. Everything works up until the very end of the upgrade process when I get this error.
Code:
(process:2227): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Parsing primary.xml error: Couldn't find end of Start Tag rpm:entry line 15303
[Code]...
LDAP server failed to start.. Please check error log for problems.
View 2 Replies View RelatedRunning RHEL 5.4 on a HP server. Ran into a issue today where ldap was working fine then was informed it was failing. During the troubleshooting process, I found out that the ldap service failed to start up. See error below:
/sbin/runuser: /usr/sbin/slaptest: Permission denied
I checked the permissions of the ldap.conf and slapd.conf files and they appeared to be correct. Any ideas why ldap will not start up?
using centos 5.2
unbale to start ldap server.
see below info
[root@system ~]# yum install openldap
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
* base:
[Code]....
clean install of Slackware 13.1 64-bit. From day 1 I have been unable to browse Samba servers and shares on my home network. NFS, FTP, SSH, etc all seem to be working fine. I've been updating it regularly in case this was a bug, but I'm not so sure any more.
Reboot in WinXP sp3, I can browse fine. My wife's Win7 laptop works fine. My old Slack 12.2 system worked fine. I have not made any changes to the network other than adding this computer to the mix.
Pentium Dual Core e6700 @ 3.2GHz
Asus P5G41T-M/CSM
4GB DDR3 Ram
1 TB Hitachi SATA
Gigabyte ATI Radeon HD 5670 1GB Video PCIe
[Code]....