Ubuntu Servers :: Installing Zend Server \ When Log In To The Admin Interface, It Told It Couldn't Start The Webserver?
Oct 18, 2010
I had installed apache previously on my system, and I think I uninstalled it completely, although remnants might have remained. I have just installed zend server ce php 5.3, and I am having trouble getting it to work. When I log in to the admin interface, it told me it couldn't start the webserver, so I go to restart apache, and it gives me this:* Starting web server apache2 Syntax error on line 6 of /etc/apache2/sitesenabled/zendserver_gui.conf:Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configurationThis has to do with php_mod some how... but I am not sure how to fix this, or where to start, since I am relatively new to actually setting up apache.I thought this might have something to do with libapache2-mod-php... so I went to reinstall it, and ran this:
mburns@mb2449-laptop:~$ sudo aptitude install libapache2-mod-php5
Reading package lists... Done
Building dependency tree
After setup Openldap server with TLS/SSL use ldaps, I install phpldapadmin and have an issue LDAP Server is configured and running. make some ldapsearch and it oki. I couldn't use https to browse LDAP server when I use http and I can't connect Could not start TLS. check your LDAP server configuration. This is my config
Perty self explanitory, I'm trying to boot up ubunto server edition 10.10 from a USB stick (pen drive) and it works fine until step 3 when it says "Your installation CD-ROM couldn't be mounted. This probably means that the CD-ROM was not put in the drive. If so you can insert it and try again
Try again to mount the CD-ROM? <Yes> <No>"
I don't have an installation cd-rom! I put the .iso file onto a memory stick, inserted it into my old computer (which i will turn into a server later) , restarted it and got past the first two slides and got this error? Do I have to put the iso on a cd-rom?
in my centos5.3 i am able to login in terminal but while logging in gui shows error as follows-- Couldn't start x server on card 0 i fired the command as follows- yum groupinstall "X Window System" shows illegal instruction
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
I have been having some trouble configuring a means to remotely administer an Ubuntu Sever 10.04 machine i recently built and am hoping for some guidance. I'm sorta new to linux so please forgive my ignorance of conf files and the command line . I am looking to have this server serve as...VPN Server, Minecraft Server, KVM Server, Torrent and Dyn-DNS box.I have managed to install all the KVM settings including bridged networking running (Personal victory there) and sorta have Minecraft running (only need to figure out how to make it launch on boot). Torrents already taken care of since Transmission came along with the ubuntu desktop install .The big thing that is slowing me down is remote management. I installed ubuntu desktop (thankfully its Gnome 2), i know that most people don't like it but its what i'm most familiar with. I tried running VNC but always needed to login on the physical machine before I could use that which defeats the purpose. I am now using xrdp which frankly the performance is terrible compared to what i was getting with the built in VNC server and still needed the monitor on and active to connec
I've just updated from 9.10 to 10.04. Everything seems to run fine except for zend optimizer which is throwing "Zend Optimizer not installed" error. I went to php.ini and the following line is still there
Code: zend_extension=/etc/php5/ZendOptimizer.so.Also I checked that the file does exist and that the php.ini I am looking at is in fact the php.ini file that is being used by the server.
I can connect to the HTTP cups interface (localhost:631) but if I need admin priviledges, giving my id/pwd doesn't work. I don't see any "cups" group defined.
Otherwise, how do I enable a printer? I could disable it using the KDE printer management interface, but I can't re-enable it using same... Answer: /usr/sbin/cupsenable
I took the hard drive from my server and put it into another machine to install centos with, as the server does not have a working CD drive. So now the situation is that x refuses to start when centos boots. I get a message saying: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?
I have recently make a website. When I enter to it by http://localhost it works fine, but when I enter by my IP, nothing apears. Firefox told me that the server takes too long to respond.
I am using slackware12.2, I have a mysql5.0.67 which system has install for me and I had install a zend server4.0.6 from URL... It runs all right .When I try to run my php code in zend server(apache),it break out an error with connect to mysql.But when I login mysql in command line ,I can see all my databases what my codes need in it.The code was running well in windows. I try to build the zend+mysql+php environment several times in linux but never success。how can I do to let it runs all right ? some one said I can edit php.ini, It's it right.
I'm having an odd problem with Server 10.04. I have two interfaces but only one interface is brought up on boot - and it's not always the same interface. Usually eth0 fails and eth1 comes up fine, but sometimes eth1 fails and eth0 comes up. I'm using the same config that was previously used on Server 8.04, but never had this problem on 8.04.
/etc/network/interfaces:
Code: # The loopback network interface auto lo iface lo inet loopback[code]....
Once the system has booted, if I run /etc/init.d/networking restart, then both interfaces come up fine. However, having read that this is now an upstart, I also tried service networking restart, but get:
Code: restart: Unknown instance: Don't know if that's significant or not.
Cannot find a single problem with networking reported in log files, other than bound services failing to start as a result of the interface not being up (dansguardian, squid, dhcp which are all bound to eth0, and therefore fail when eth0 doesn't come up. And when eth1 doesn't come up, the only process that fails to run is clamav-freshclam). Although at one point I did see something about interfaces being renamed which seemed a little odd.
I could just have networking restarted automatically once booted, but this obviously isn't a solution to whatever is causing the problem. There is quite a bit running on the server: Samba/LDAP domain controller with roaming profiles, squid & dansguardian with LDAP auth, postfix & dovecot with LDAP auth, mailscanner, dhcp & ddns, strict iptables policy with nat... so I'm not sure if any of those could have any bearing on interfaces?
I am new to Linux. I installed some weeks ago Fedora 14 via burnt iso file downloaded from official Fedora site. It was working perfectly like a charm for me until yesterday when I tried to install zend server for PHP. During my first try of installation of zend server it corrupted out my apache server and I lost apache on http://localhost. I removed all "zend-server" like stuff from "Add Remove Software" screen. Installed again apache 2 in the form of LAMP (Linux Apache Mysql Php) via terminal. Apache installed correctly and started workeing again ok on localhost. Then again I tried to install zend server from install.sh file in downloaded zend server installation. It showed me after a while like "zend server installed successfully".
I shut down my pc thinking everything is ok now. Today when I started my system, it shows me boot screen of Fedora, I select fedora and then it shows me balloon filling up for around 5-7 secs. Then all of a sudden a black screen appears up with a cursor blinking at its top left and then nothing else happens further. I cannot find login screen to my desktop anymore. I remember one thing that during reinstallation of apache from terminal, I set following command like "chkconfig --level 235 httpd" (I guess that's what I have written as per some online tutorial for LAMP). Is that cause of mine problem ot its something else?
I'm a PHP developer trying to switch from Windows to Linux. So I'm new with Linux. I tried to google for a solution and tried the suggested wiki FAQ but with no success.I wanted to install zend-server-ce-php-5.3 today with yum. This worked okay.After this I tried to install php-5.3-extra-extensions-zend-server. This seemed to work.
I'm trying to install some nvidia drivers but I need to install the correct headers. uname -r says: 2.6.31-21-serverbut I can't find the headers anywhere to install. 2.6.31-21 and 2.6.31-21-generic are installed but not the server version. It's not showing up in synaptic and using apt-get I get the error message in the title.I have 2.6.31-22-server headers but for some reason when I boot into 2.6.31-22 the OS can't see my 3ware cards and, obviously, the arrays they control. So, I can't use 2.6.31-22 yet.
I'm running Fedora 15. I installed mod_ssl and tried restarting Apache. I get the following error:
Code: (98)Address already in use: make_sock: could not bind to address [::]:443 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443
no listening sockets available, shutting down Unable to open logs I rebooted the server, thinking there was some process in the background that was stopping Apache from listening on 443. Same problem.
I ran:
netstat -A inet -lnp and lsof -i tcp:443
I remove mod_ssl and Apache starts.
The other question I have is what to do with /var/www/html
In the default install, root:root owns it, but I want people to be able to ftp in to that folder and write to it without using the root account. I'm thinking of changing the group to apache and putting the ftp users in the apache group. What is the recommended behavior here?
I'm setting up a Python-based webserver on my Debian box. Setup: The Debian OS is VM based, but I've switched the VirtualBox from NAT to Bridged. IP of the VM setup = 192.168.1.7 (per my router's admin screen or ifconfig). I've succesfully set up my router's port forwarding for both ssh and HTTP. I've successfully set up my router's dynamic dns using [URL].
Regardless of the specific Python webserver I'm using (Django, CherryPy, standard library), I have to start the webserver @ 192.168.1.7:80 using sudo. Otherwise I get an error about not having permission to access the port. None of the webserver tutorials mention needing to use sudo when specifying an ip:port.
Question: why do I need to use sudo to start these webservers? Is it an indication that I shouldn't be using 192.168.1.7? Or that I'm not setting a config file properly somewhere?
I posted this question a while ago but haven't had any luck getting it answered so I reworded everything to make it more clear. I started an Ubuntu web server on an old work laptop. The purpose of this server is to host a small file-sharing site, a forum, and a wiki. I have no prior experience with command line Ubuntu but am trying to figure this all out.
So far Ive setup the LAMP server, so apache, mysql, and php are installed. Ive also installed phpBB3 and Mediawiki. Both phpBB3 and Mediawiki are able to open from inside my LAN. I also have SSH setup and am able to use putty to manage the server from inside my LAN. Mediawiki runs slow internally but this is a secondary concern.
Externally to the LAN I can access the webserver using SSH(but sometimes it is too slow for anything that opens up such as nano or the SQL password prompt to display and the connection drops). I can also browse to the site and see the default apache welcome message. But I cannot open the mediawiki or phpbb site. Both will sit indefinitely and not open. The access log on the server shows that the request is being passed through though.
how to create an entire server from scratch using a minimal install. I know Ubuntu Server 10.04.1 comes with packages that can be included during install but for the sake of learning I only installed SSH access.
I was able to get Apache2, MySQL, PHP5 installed and running fine. What I'm trying to do next is setup DNS so I can point fragdata.com to my Ubuntu server and have other people see my test site.
I have registered the nameserver ns1.fragdata.com with my IP and updated DNS in my registrar. I followed the tutorial but "dig fragdata.com" gives me the following:
In order to pass PCI compliance I need to upgrade our webserver from php 5.3.5 to php 5.3.6. I found this: [URL] however it doesn't seem to work. My best guess is due to the fact I have 64bit server. Is there something else I can do without going through a compile?
I am trying to install a ubuntu server to serve sites. More than one, so Ill use Apache VirtualHost.When installing ubuntu server ask me about installing DNS Server? do i need it?
I have two servers on my network One with ubuntu 9.10 server And one with openSUSE 11.2.The ubuntu server is my webserver and runs phpsysinfo and my website. On the openSuse server i have a webbased application and some files that i want people to be able to reach by using mydomain.com wich points to my ubuntu server. Is there any way to do this?
I am planning to setup my own webserver using webmin, but from what i've read i apprently need two harddrives. one for the OS & one for the data. can i just partition my harddrive into two because i dont have another hdd lying around. i also just want to note that this is my first time trying to do something like this sooo I rly want to try to set up my own server . As a side note ill list the specs of the comp i plan to use as a server. Pentium 4 2.8ghz, 1gb DDR, 80GB 7200RPM HDD.
