Ubuntu Servers :: From Filezilla FTP Server To Vsftpd - Configure?
Feb 21, 2011
I have used for a long time Filezilla FTP Server on a windows server, for multiple users in my company around the country.Lately the windows box died and I said let's try ubuntu server 9.10. I configured to my best as a Samba file server and from a speed point of view it works even faster than the Winbox.Now getting to FTP setup, I had the following problem when setting vsftpd.How can I enable more directories for the user, each with its own rights. By example, in Filezilla I had two folders for each user: one was a specific folder in which he could also write, and the other was read-only. They were setup with aliases, so that when user login, he sees one continous list of folders.I tried with symlink, but couldn't do it. Also I searched through the man page but also did not find something specific for this task I would appreciate any help you guys could give me in order to solve this issue, using the best practice for vsftpd. Also note that I am open to other FTP servers as well.
View 1 Replies
ADVERTISEMENT
Aug 12, 2011
I have some questions:
1) I want when someone trying to access my ftp domain(not from my home network) ,to ask him for username and password.
2) What is the difference between filezilla and vsftpd?They do the same job?(Ok,i added a user with vsftpd and now,what?)(Filezilla works and i can upload files)
3) When someone tries to connect to my domain(outside of my home network) it shows the "It works" page.When i access my domain from my pc it shows me the files i uploaded!How can i fix this???
4) When i try to connect via another pc (in my home) ,it shows the routers interface!
5) Filezilla works with SSH but when i try with FTP or when i use the wizard connection manger it shows the "connection timed out".I use shorewall and in the shorewall/rules i have "HTTP..SSH...FTP".
View 9 Replies
View Related
Oct 15, 2010
I have a dynamic IP connection. so i got hostname on [URL]. Now i want to configure a ftp server with that. I am choosing following options in the network configuration wizard:
1. default transer mode: passive
2. use server's external ip instead
3. get external ip address from the following address: XXXXXX.dyndns.org
4. ask opearting system for a port
5. test result:
[Code]....
View 13 Replies
View Related
Feb 13, 2010
how to configure vsftpd? i use rhel-5 server.
View 1 Replies
View Related
Aug 3, 2010
pls tell me complete configuration of vsftpd server on redhat 5
View 1 Replies
View Related
May 31, 2011
i want to configure vsftpd server with file zilla in ubunto environment..
View 3 Replies
View Related
Jul 6, 2011
Can some one help me to configure vsftpd with Virtual and System user
View 37 Replies
View Related
Feb 18, 2011
I made a "test" server recently, put a samba + apache + vsftp server on it. The first 2 work but the VSFTP server is troubling me. On my lan it works. but on a wan: My ISP blocks port 21 so I changed it to 2200, my friend tried to connect earlier (With "ftp://myip:2200") and he had to type in a name and password, he did that (I made him an account)he got 425 failed to establish connection. Now I Re-installed vsftpd again, did the exact same thing and now it just wouldn't connect. saying the webpage can't be found. Question 1: What should I do to let a user acces from outside of my LAN? I think it's because of passive mode: but I have no idea what ports I should open for passive mode? My ftp port is 2200.
FileZilla tells me.
Entering passive mode
Command: List
And than that it can't find directory's
View 9 Replies
View Related
May 29, 2010
I just made a Ubuntu Server install in a virtual machine and am having trouble setting up FTP to transfer files. I've installed LAMP and vsftp. The web server works great, but FTP gives a connection refused error locally and remotely from the host machine. 'Connection attempt failed with "ECONNREFUSED - Connection refused by server".' nmap localhost doesn't list FTP as open even though I have vsftpd set to listen. I've tried restarting vsftpd with no luck.
View 9 Replies
View Related
May 13, 2010
I'm completely new to Linux/Ubuntu, but I managed to create a FTP server by using apt-get vsftpd or something.I followed a tutorial and modified a file called vsftpd.conf.I tried to disable all kind ofblocking/permissions. From a Windows client, I can connect to it without any login (I enabled anonymous) and I can download from it, but I am unable to modify it or upload files. Unless there is a better way to transfer files between the computers, how can I enable writing on the FTP server?
View 3 Replies
View Related
Aug 5, 2010
how to start automatically vsftpd in my server after reboot?
View 5 Replies
View Related
Aug 15, 2010
I have installed filezilla 3.3.3 in my Slack current Trying to configure a personal text editor in filezilla In the settings I put :
kwrite %U
but I get an error message 'The file selected as default editor does not exist.'
View 2 Replies
View Related
Feb 10, 2011
Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies
View Related
Sep 1, 2011
created a domain and used filezilla and everything works fine.Now,i want in order to have someone access to my domain,to ask him for username and password.
View 3 Replies
View Related
Jan 26, 2010
I installed OpenSSH via tasksel and am using Webmin for administration. I'd like to be able to SSH externally and want to setup the necessary public/private keys to use in FileZilla. In Webmin, under Servers > SSH Server I can click 'Host Keys' and see an RSA key. Is this the public or private key for my server? Do I need to copy this into a text file to import it into FileZilla on my remote PC (that I want to connect from)? Is that all that needs to be done (aside from opening the port on my router/firewall)? Or, is there an automated way to set this up via Webmin?
View 1 Replies
View Related
Aug 22, 2010
I have been trying to get a home server to do what i want but just not getting there.I only need it to serve up the files to a home ( non internet ) network.I saw that filezilla also comes in a Linux version also. I am going to give it a try next. Anyone use the linux version of filezilla ? What happened did it work not work ?
View 3 Replies
View Related
Mar 27, 2011
Ubuntu 10.04 32 bitsvsftpd 2.3.4 installed from sources
Code:
# cat vsftpd.conf
listen=YES
[code]...
View 1 Replies
View Related
Mar 5, 2011
i've set a server Fedora 11 using Vsftpd + database berkley + ssl 'certificate) he works perfectly. So i wanted to set a new one on Fedora 14, there is the problem..On my fedora 14, i tryed to use the configuration file that i've made on the F11 but withtout success. It seems that when i activate the SSL option on the server it does not want to start anymore... and i have no errors messages. I notice that when i desactivate the SSL "ssl_enable=NO" my server on F14 can start normaly.
[Code]...
View 1 Replies
View Related
Mar 27, 2011
Ubuntu 10.04 32 bitsvsftpd 2.3.4 installed from sources
Code:
# cat vsftpd.conf
listen=YES
[code]...
View 1 Replies
View Related
Jan 10, 2010
I installed vsftpd and edited the config. file according to the instructions. I restarted the process. I then installed FileZilla.
I input 127.0.0.1 as my host name, my username and password, and port 21. Connection is successful for a few minutes until I get a 421 Timeout and the connection closes.
While still connected, I have attempted to run the network configuration wizard, only to find a few hitches. The furthest I got was when I had the wizard acquire my IP address from the website (I do have a dynamic IP), and when I manually input port 50000-50050 for it to use, because I have forwarded them on my router.
The test gets quite far, and only fails at this juncture:
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
What could be going on? I double-checked that my ISP allows FTP on port 21, and all seems good to go.
View 9 Replies
View Related
May 3, 2010
I've been running denyhosts on Ubuntu 8.04 servers without any problems using the how-to found hereow that I have a new Ubuntu 10.04 server running, I thought I would just install denyhosts from the Ubuntu repository not realizing that the paths and filenames of the install are different from the how-to I am used to using.I figured out what the name of the new denyhosts config file is (at least new to me) and the new location, but I'm not sure about the "allowed-hosts" config file.Does anybody know where the new path for this file is and whether the filename is still the same?
View 2 Replies
View Related
Jul 8, 2010
I am suing filezilla as my ftp client and when I try to upload through squid from client machine it shows:
But previously it worked
I have added these lines in squid
acl CONNECT method CONNECT
acl FTP proto FTP
http_access allow ftp
View 3 Replies
View Related
Jan 22, 2010
finnaly i can run my ubuntu server 9.04 well, thnx to this great member of ubuntuforums.org now, i wanna i wannna install SNMP on my system, but after i do that, when i wanna connect with another client, it give me error like this :
Code:
no response received
SNMPv1_Session (remote host: "10.100.7.179" [10.100.7.179].161)
community: "public"
request ID: 862383236
PDU bufsize: 8000 bytes
[Code]...
10.100.7.179 is my client, i allready install snmp agent on it. but why still eror then? plz give some help. thnx before
View 1 Replies
View Related
Aug 15, 2010
Starting with Ubuntu Server 9.04, when I log in at times the OS smartly reports the number of updates available. I have a couple of questions of how to extend this functionality:
1) How could I back-port that functionality to 8.04 servers? Does that happen somewhere in the /etc/cron.daily/apt script? (Just the checking on # of packages needing updates, does not need to appear on the login screen.)
2) Then with that information, if the number >0 then use mailx to send admins an email. Since 9.04 and higher already do the first item, then in my mind #2 is the only thing needed for 9.04 and higher servers, and #1 is also needed for 8.04 boxes.
View 1 Replies
View Related
Jan 25, 2011
This is my first post to the forum
I've recently migrated my office PCs to ubuntu. My server doesn't server any big purpose but to provide Internet Connection to the rest of the nodes. Things were quite easier during the windows era using ICS.
Even in Ubuntu we were able to do it using the "shared network" option, simple & straight forward. But things got complicated only after installing "squid". Needless to say it brought in a lot of add ons as far as the http proxy serving is concerned & we are enjoying a better internet(http only) connectivity without any doubt. But we are not able to use our email clients, MS Outlook or Thunderbird
But to best of my knowledge squid strictly is a http proxy hence doesn't support handling requests on ports other than 80. (465 & 995 in my case)
Now I have two queries, 1. Can "Squid" really be used to do what I want here??? using iptables, port forwarding or any other mean
& 2. Can any one suggest a good pop3/imap proxy as good as squid is.
View 3 Replies
View Related
Jun 8, 2009
I am planning to deploy an OpenLDAP server in my LAN for basic authentication, but I have no idea how to do it. I would like to know how to configure an OpenLDAP Server, and I would also like to know about knowledge resources, if any.
View 3 Replies
View Related
Aug 3, 2009
How to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies
View Related
May 13, 2011
I want to configure squid server with SSL so that users send clear text username/password and also data in encrypted mode. i googled but all of the configuration is for reverse proxy not requests from users to proxy server in LAN for example.
View 5 Replies
View Related
Jun 4, 2011
I am a newbie to linux and running ubuntu server 10.10 (no gui), I had it configured with a fixed ip address and all was fine till I changed internet poroviders and got issued with a new router.
I am trying to configure the server to reflect the new settings of the new service provider. here are the contents of /etc/network/interfaces
Code:
auto eth0
iface eth0 inet static
address 192.168.15.52
netmask 255.255.255.128
gateway 192.168.15.1
Just so I got this right can someone tell me if I am right here. address is the IP I wish to give to my server statically. and gateway is the ip of the router. When I try to ping the router I get
Code:
Ping 192.168.15.1 (192.168.15.1) 56(84) bytes of data.
From 192.168.15.1 icmp_seq=1 Destrination Host unreachable
When I try to ping the internet i get :
[Code]...
Is there anyone that can shed some light on where my problem may be. As i said before I got the new router I had been working with the server no problem.
View 9 Replies
View Related
Feb 5, 2010
I like to know how to install/configure mail server in Fedora 11, as I am going to do it first time.
View 3 Replies
View Related
