General :: Configure Vsftpd Server With File Zilla?
May 31, 2011i want to configure vsftpd server with file zilla in ubunto environment..
View 3 Repliesi want to configure vsftpd server with file zilla in ubunto environment..
View 3 Replieshow to configure vsftpd? i use rhel-5 server.
View 1 Replies View Relatedpls tell me complete configuration of vsftpd server on redhat 5
View 1 Replies View RelatedI have used for a long time Filezilla FTP Server on a windows server, for multiple users in my company around the country.Lately the windows box died and I said let's try ubuntu server 9.10. I configured to my best as a Samba file server and from a speed point of view it works even faster than the Winbox.Now getting to FTP setup, I had the following problem when setting vsftpd.How can I enable more directories for the user, each with its own rights. By example, in Filezilla I had two folders for each user: one was a specific folder in which he could also write, and the other was read-only. They were setup with aliases, so that when user login, he sees one continous list of folders.I tried with symlink, but couldn't do it. Also I searched through the man page but also did not find something specific for this task I would appreciate any help you guys could give me in order to solve this issue, using the best practice for vsftpd. Also note that I am open to other FTP servers as well.
View 1 Replies View RelatedCan some one help me to configure vsftpd with Virtual and System user
View 37 Replies View RelatedI am trying to use cron and FTP to backup files regularly from my main server to a backup server. The backup server was a "bare bones" setup with no control panel or even FTP. It is running CentOS 5.3.
I installed VSFTPD which appears to be running OK and I can connect via FTP from my other server, but when I try to run my backup script (it uses mput) I get a "553 Could not create file" error.
Some relevant info:
The user I have created for this is "ftz" with home directory /home/ftz/
Running ls -l shows: drwxrwxrwx 3 ftz ftz 4096 Dec 18 07:46 ftz
so permissions and directory ownership don't seem to be the problem.
vsftpd.conf was left in default form:
Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
[code].....
Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies View RelatedI have a centos server installation running, and have installed and configured vsftpd.
FileZilla works great. I am able to connect and transfer files both ways. I used this just for testing purposes.
What I need to do is get Fling File Transfer working. I can connect to vsftpd with Fling, but that is as far as it goes.Sep 20 11:18:44 ftp vsftpd[28286]: warning: can't get client address: Socket operation on non-socketSep 20 11:31:03 ftp avahi-daemon[2240]:
Fling's logfile shows this:
11:25:57 Connect: 192.168.40.41
11:25:57 Connect: 192.168.40.41 Ok
11:25:57 Upload: C:UsersPublicDocumentsFling 1
[code]....
How to configure File Sharing server which will be in the same network along with Windows DNS servers and others.Googling showed me that "Samba server" will do the job of file sharing . Okay samba server is configured on Ubuntu Linux machine but how to add this to the existing domain where windows machines are ? Do i have to really add this Samba server to windows Active directory or adding it in the network will do? Please also help me in configuring samba server security and the ease of user access of the data on the server.
View 2 Replies View RelatedUbuntu 10.04 32 bitsvsftpd 2.3.4 installed from sources
Code:
# cat vsftpd.conf
listen=YES
[code]...
Does someone know of a solid article on what files to back up to restore a vsftpd server onto another server?
Right now i'm backing up the ftp directory structure with all the files in it, but no configs, users, etc
I've setup vsftpd for my FTP on my server, I edited the vsftpd.conf to allow me user to gain access to their home directory, It doesn't seem to let me in, I'm getting the error
Quote:
530 This FTP server is anonymous only.
this is set at yes
I've set it to NO and I get
Quote:
500 OOPS: vsftpd: both local and anonymous access disabled!
I don't quiet under whats going on, I followed this tutorial [URL]
In the end I want to be able to upload files to the www directory for my web site.
Ubuntu 10.04 32 bitsvsftpd 2.3.4 installed from sources
Code:
# cat vsftpd.conf
listen=YES
[code]...
Basically, I open Firefox, Swiftfox, Icecat or any other mozillalike browser on any of my Slackware Current systemsand it sooner or later crashes with following error
Code:
/opt/swiftfox/run-mozilla.sh: line 131: 1943 Segmentation fault "$prog" ${1+"$@"}
the error is same with all
[code]....
I am trying to ftp a whole directory tree using vsftpd as ftp server in fedora11
Code:
I am getting error while transfering a directory tree ...
I currently have 4 Linux Servers installed in a test lab that I have built for my job. I am in the process of trying to get FTP to work (vsftpd is installed). I don't need an FTP GUI or anything, I can use terminal (and I don't have an internet connection, so I probably can't get one anyway). I bring up the terminal and I type FTP and I am presented with a few problems:
1. If I try to FTP to one of the other Linux Servers on the network, I get "No route to host" error.
2. If I try to FTP to the Server I am sitting on, then I am able to successfully connect, obviously. But when I do an "ls," I don't see any available files.
I am assuming this is because I have not yet set up a folder for it (i.e. Windows uses "ftproot" folder). I am running Ubuntu Gnome 9.04 Jaunty Jackalope for a GUI, and I am running Ubuntu Server underneath (Yes I need a GUI for what I am using the server for).
I'm having difficulties with uploading files to a CentOS-server with vsftpd. I have the exact same configuration on a Fedora10 and there I have no problems...
[Code]...
I've been tasked with setting up a RHEL FTP server to mirror one we currently have. From what I've read, I need to install and configure VSFTPD and then configure IPTables. From what I've been able to come up with, I need to follow the steps in this article to install and setup VSFTPD. Is this a good complete article to follow you think?Also, how do I copy the iptables config from that server to my new one? I think that iptables on our current server only allows certain IPs or blocks certain IPs (not sure which), so I need to have it do that on my new server as well
View 14 Replies View RelatedI want to enable the communication b/n ibm tsm server and ESX server . for that reason i want instal /etc/init.d/vsftpd in my sys. But iam unable to find the link which can provide me this software [/COLOR].
View 5 Replies View Relatedi am having a problem concern zlib installation.i tried configure file successfully but make file displayed some errors.that usr/linux/limits.h not found.so i found that i have to install glibc-headers-devel...but there is no such a kind of package in ubuntu repository?/????/some people saying that libc6-devel is equal to them!
View 1 Replies View Relatedi'm new to linux and i am running ubuntu 11.04.i'm trying to install wine. i downloaded the binary files and extracted them. i tried running the command './configure' and got a error saying :no such file or dir. i read the 'readme' file but cannot configure.
View 3 Replies View RelatedI need to enable GFS for a shared storage file system, I need to share it to different ip's so that every one get syn data on that file system
ex : /data on 192.168.0.10
I need /data to be in GFS and need to share to 192.168.0.20 & 192.168.0.21
so that this two machines can have sync file system
/data is in shared storage
I want to configure file printer (print to file) on my rhel-5 machine in such a way that if users fire print command from windows xp it should create an individual computer wise txt file on my linux machine. File name should be different for each printer.
View 2 Replies View RelatedI am trying to configure samba for a stripped down file server. I am running debian with command line only. My problem is that I cannot unmask samba.
See below:
root@debian:/home/aaron# service samba status
● samba.service
Loaded: masked (/dev/null)
Active: inactive (dead)
I have tried "sudo systemctl unmask samba.service". I receive no errors however it does not actually unmask. I can't find anything online regarding a service stuck on masked status.
I'm not trying to setup a email server. ;) Firewall is set to disabled. SELinux is set to disabled.. How can i configure (which file?) the server to be able to send email out? When I try "mail -s testmail myemail@[URL]" and enter some text and then CTRL+D.. and return, I get command prompt again..
[Code]...
OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
I've got a bachelors in Computer Information Systems from Metro State in MN, but sadly, we didn't spend much time familiarizing ourselves with UNIX based OSs. I'm sure I'll have plenty more questions to pose later as well. I'll pay it back with help for anyone who's working on an evil Nortel router.
I believe I've got VSFTP set up and configured (mostly) the way I want. Here is the config file:
Code:
travis@travish82server:/etc$ cat vsftpd.conf
listen=YES
anonymous_enable=NO
local_enable=YES
write_enable=YES
dirmessage_enable=YES
[Code]...
I need to use MFix a open source program Therefore, because i don't have Linux on my computer i use Cygwin_NT-5.1 the latest version. From the help desk they told me that i need to configure a file to fit with my system. I just changed operation system to CYGWIN_NT-6.0 (instead of the command uname -s ; set opsys=$1. this was the only way i had an idea to do it, so i tell the programm that my sytem is a 6.0 but it isn't
then i wanted to install mfix and it gives me the error
../../model/make_mfix: line 119: syntax error near unexpected token '('
../../model/make_mfix: line 119: 'echo -n "Do you need debug version? (y/n) [no] "'
by looking in he make_mfix file it looks like this echo -n "Do you need debug version? (y/n) [no] "