I am suing filezilla as my ftp client and when I try to upload through squid from client machine it shows:
But previously it worked
I have added these lines in squid
acl CONNECT method CONNECT
acl FTP proto FTP
http_access allow ftp
I would like to know if there's a way of using FileZilla or another FTP client without having a web page. My intention is to have my files on a server and download them form time to time from different computers using FileZilla's portable version. It would also serve as a Back-up copy of 'em. If there's no way of doing that, I can get a subdomain from, that is free and without a file limit?
View 4 Replies View RelatedNew User to Ubuntu by the way. I have two computers, both running Ubuntu 10.4 fully updated and I am trying to bring files from one computer to the other with Filezilla ftp client. I was able to do this before, but I ended up having to reformat because of a driver screwup that I couldn't figure out how to fix. Now I am at a loss on how I managed to allow the computer with the files to connect to the one receiving the files. Computer A is the one that has the files that I am trying to send to computer B. Every time I try to send them over I get a "connection was refused" error.
Typed in the right IP, username, password, and port but still wont connect. Are there any things I have to do in terminal to allow access? I installed firestarter and just disabled it so ports should be open. By the way, I am using FTP because it was much simpler then trying to dink around with Samba and this is a pretty safe network.
- Enabled firewall, forwarded the ports in the events list then we get "request timed out"
- Reformatted> Fresh install >Updated
I installed vsftpd and edited the config. file according to the instructions. I restarted the process. I then installed FileZilla.
I input 127.0.0.1 as my host name, my username and password, and port 21. Connection is successful for a few minutes until I get a 421 Timeout and the connection closes.
While still connected, I have attempted to run the network configuration wizard, only to find a few hitches. The furthest I got was when I had the wizard acquire my IP address from the website (I do have a dynamic IP), and when I manually input port 50000-50050 for it to use, because I have forwarded them on my router.
The test gets quite far, and only fails at this juncture:
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
What could be going on? I double-checked that my ISP allows FTP on port 21, and all seems good to go.
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I have a dynamic IP connection. so i got hostname on [URL]. Now i want to configure a ftp server with that. I am choosing following options in the network configuration wizard:
1. default transer mode: passive
2. use server's external ip instead
3. get external ip address from the following address: XXXXXX.dyndns.org
4. ask opearting system for a port
5. test result:
[Code]....
I have used for a long time Filezilla FTP Server on a windows server, for multiple users in my company around the country.Lately the windows box died and I said let's try ubuntu server 9.10. I configured to my best as a Samba file server and from a speed point of view it works even faster than the Winbox.Now getting to FTP setup, I had the following problem when setting vsftpd.How can I enable more directories for the user, each with its own rights. By example, in Filezilla I had two folders for each user: one was a specific folder in which he could also write, and the other was read-only. They were setup with aliases, so that when user login, he sees one continous list of folders.I tried with symlink, but couldn't do it. Also I searched through the man page but also did not find something specific for this task I would appreciate any help you guys could give me in order to solve this issue, using the best practice for vsftpd. Also note that I am open to other FTP servers as well.
View 1 Replies View RelatedI have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies View RelatedI have installed nfs-kernel-server on the server and nfs-common on the client. Assumeserver 192.168.1.1client 192.168.1.3
content of /etc/exports is:
/home 192.168.1.0/255.255.255.0(rw,sync,no_root_squash)
/home/nfsroot 192.168.1.0/255.255.255.0(rw,no_subtree_check,async,no_root_squash)
[code]....
I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
My desktop is running 'buntu 9.10 and I have recently aquired a couple of half decent servers running Windows server 2003. I have a few windows app's that I use regularly for work that I have had limited success in running with wine or in vm's. I stumbled upon a how to to call apps in a vm to run seamlessly on the host desktop and did some playing and have succeeded in calling app's on my servers from my 'buntu desktop, the command I have set in my launcher for one of them (DIALux)
My question is, can I change the default application/file association in 'buntu with a custom command so I can double click on a file and have it open in one of these remote app's??If I can, what is the correct custom command to be using as using the above doesn't work at all, it just tries to open the file with rdesktop not the remote app.
I have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies View RelatedI'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.
what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
I love Ubuntu and last night I wiped crappy windows 7 off my laptop and installed and customised a beautiful Ubuntu 9 OS ( I tried the new 10.04 first but it had some issues for me ). Now, up here at work we got a Domain Controller that is running windows server 2008, I need to be able to RDP into it and mess with it, I tried to use the Terminal Server Client that comes with Ubuntu, and I can see the login screen just fine, but when I try to log in it says incorrect password and wont go through.
Just to make sure it was not my account that was the issue, I went to my boss and used his computer (a MAC running OSX) and I was able to get into the same server with the same credentials, so it has something to do with my computer not my account. Do any of you have any ideas on what the problem could be?
I have 2 ethernet cards but when I look at the Network configuration in "Hardware Tab" I have another acx wireless network. How to delete that because In my system Idon't have wireless card..probably installed before but want delete it now.
[code]...
then windows can ping server and resolve ip address and browsing Internet but can't ping [URL]... result is Request time out. ICMP already enabled in iptables.
i tried to connecting from a windows7 client to a linux server through vnc server.But its very slow , is there any alternative for vnc . i heard that samba can be used as a remote desktop tool if its true please reply with configuration details.
View 2 Replies View RelatedI actually have a server and a client.The client must connect to the server (via internet) to access to external websites. (You can see the attachment, maybe it's more clear )My actual problem is, I have configure Squid on my server, but I want to force SSL for the connection between the client and the server.I didn't really find nice tutorials about on that, maybe someone have an idea ? Or maybe some indications ?
View 1 Replies View RelatedIn a newly installed Linux machine which is a client machine, is not listening to NIS domain server even after setting IP address ,default gateway,and subnet mask.What are all the changes to be done in configuration file.And how can be solved
View 2 Replies View RelatedI have one Windows-XP on Machin 1 and one Linux on Machine 2.
I want make Linux machine as CVS server and Windows Xp as CVS client.
How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
Photo : http://img27.imageshack.us/img27/5864/cvsserver.gif
I want to install filezilla in F15 Or recommend me other good ftp application.
View 5 Replies View RelatedIve just insalled Ubuntu 9.10 and installed Filezilla from the Ubuntu Software Centre, however this is only version 3.2.7.2. How do I update this to 3.3.2? Ive downloaded the tar.bz2 file and extracted it in Downloads but how I do install it from here?
View 9 Replies View RelatedI'm on Ubuntu 10.04 Lucid. At the moment, the current version of filezilla in the software center is 3.3.1. That version has some known bugs, and the current version of filezilla at their website is 3.3.3 (released more than a month ago). How can i update filezilla? FIlezilla tells me to use software manager, but 3.3.3 isn't there yet. Moreover, they only release the source code without a deb package..
View 7 Replies View RelatedDoes any body knows ahy filezilla closes when openning a new tab??
My box is Ubuntu 10.04 LTD 64bits, Compiz enable, Gnome.
how to install filezilla on CentOs ? I did it easy on fedora, but cant do it on CentOs or maybe there is another good graphical ftp client for CentOs ?
View 6 Replies View RelatedI am Amit, working with IGate. I am able to configure NIS server and client,but after configuring server and client,when I add a new user to server and client and when I login througy new user from client, It shows error "user cannot found".I added a new user to NIS server make entry of user to client pc in /etc/auto.master file and restarted the services bind,nfs,autofs,portmap on server also restarted the serveces on client bind,autofs,portmap then alon I cannot login by new user on client matchine. Please tell me what is cause and how to resolve it.I shared server's /home dir and on client pc automounted the server's /home dir by making entries in /etc/auto.misc file on client pc.
View 7 Replies View RelatedI have configureed Bind in a Linux box. Well pc1 i.e "pc1.mydomain.com" is my client machine and main server is the computer in which bind is install.The client computer pc1 and the main server (Bind server) i.e FQDN "mainserver.mydomain.com "are on the same network.from client machine i can't resolve the name to IP address as my server do successfully with client. The /etc/resolv.conf file in my bind server is as
Code:
search mydomain.com
nameserver 192.168.1.254
The named.config it main configuration is as below
Code:
zone "mydomain.com" IN {
[Code]...
What client can I use on a MAC to connect to an openvpn server?
All the client s seem to use password connections whereas the openvpn server uses certificates.
I want to know the steps for configuring YUM both on server and client side.
View 2 Replies View RelatedI've configured OPENLDAP server on the CentOs 5.3. Well everything is working fine .All the uses have been added to the database.database is bdb in ldap configuration.Now client machine is on windows xp. how to integrate Windows Xp with the LDAP server for authentication.
View 5 Replies View Related
