I have a dynamic IP connection. so i got hostname on [URL]. Now i want to configure a ftp server with that. I am choosing following options in the network configuration wizard:
1. default transer mode: passive
2. use server's external ip instead
3. get external ip address from the following address: XXXXXX.dyndns.org
4. ask opearting system for a port
5. test result:
[Code]....
I have used for a long time Filezilla FTP Server on a windows server, for multiple users in my company around the country.Lately the windows box died and I said let's try ubuntu server 9.10. I configured to my best as a Samba file server and from a speed point of view it works even faster than the Winbox.Now getting to FTP setup, I had the following problem when setting vsftpd.How can I enable more directories for the user, each with its own rights. By example, in Filezilla I had two folders for each user: one was a specific folder in which he could also write, and the other was read-only. They were setup with aliases, so that when user login, he sees one continous list of folders.I tried with symlink, but couldn't do it. Also I searched through the man page but also did not find something specific for this task I would appreciate any help you guys could give me in order to solve this issue, using the best practice for vsftpd. Also note that I am open to other FTP servers as well.
View 1 Replies View RelatedAm using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work.
I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
I have installed filezilla 3.3.3 in my Slack current Trying to configure a personal text editor in filezilla In the settings I put :
kwrite %U
but I get an error message 'The file selected as default editor does not exist.'
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I used the 32-bit install of Fedora 11. I just remember my Comp is 64-bit, so Of coarse Fedora is only detecting 3 out of 8 gigs of ram, is there a way to fix this without re-installing?Im also having trouble getting software ( Opera, filezilla, etc) and for some reason software sources are not being detected [URL]
View 14 Replies View RelatedI installed vsftpd and edited the config. file according to the instructions. I restarted the process. I then installed FileZilla.
I input 127.0.0.1 as my host name, my username and password, and port 21. Connection is successful for a few minutes until I get a 421 Timeout and the connection closes.
While still connected, I have attempted to run the network configuration wizard, only to find a few hitches. The furthest I got was when I had the wizard acquire my IP address from the website (I do have a dynamic IP), and when I manually input port 50000-50050 for it to use, because I have forwarded them on my router.
The test gets quite far, and only fails at this juncture:
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
What could be going on? I double-checked that my ISP allows FTP on port 21, and all seems good to go.
I am suing filezilla as my ftp client and when I try to upload through squid from client machine it shows:
But previously it worked
I have added these lines in squid
acl CONNECT method CONNECT
acl FTP proto FTP
http_access allow ftp
I am using a reverse proxy on Debian Lenny and using apache2.
I have a site
Code:
And a site
Code:
Two files in
Code:
Code:
But the problem is [url]and [url]are both pointing to [url] I am unable to find why.I do not want to touch apache2.conf so want to go by having a VirtualHost site1.[url]
I have configured the postix email server in Centos. Its working fine with Squirrel mail client. But If I configured in microsoft Outlook. it is working. with this post I have attached the error message. Please let me know solution.I am getting this error message while I check the SMTP authentication in outgoing server tab on outlook account setting configuration.If I send any email It will bounce and came to to inbox
View 1 Replies View RelatedI am trying to configure Pure-ftpd with authenticated users But after configuring its giving the following error"pure-ftpd: (?@?) [ERROR] Unable to start a standalone server: [Invalid argument]"
Ftp is not configured using xinetd services.kindly find the configuration file /etc/pure-ftpd/pure-ftpd.conf as the attachment dont know what mistake i am doing but unable to restart the server.
I am trying to setup Rocks Cluster on a Cluster containing 1 Master node and 23 slave nodes connected via a Switch. The master node's eth1 is connected to public IP and eth0 is connected to the slave nodes via the switch.
I was able to install the Rocks cluster on the machine, I configured the IP for master through DHCP. When I run the command 'insert-ethers' on the master node, it doesnot get me any slave nodes.
setting up the Rocks cluster on all the nodes?
I have install ubuntu 9.10 on my Dell studio, I have local broadband connection with its user name and password which i use to connect internet everytime i need along with its IP Address, subnet mask, Default gateway, Preferred DNS server. Where should i put all this details to connect internet, i have already tried with Network connection in System -> Preference . It all work well in window
View 9 Replies View RelatedI have a problem with my filezilla (or my ftp server). When I want to connect to my ftp server (and also other ftp servers!), after MLSD command, I get a "Connection timed out" error.
Log:
Code:
Status: Resolving address of khanemashroote.ir
Status: Connecting to 46.4.196.109:21...
Status: Connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.4rc2 Server (Debian) [::ffff:46.4.196.109]
Command: USER badihi
Response: 331 Password required for badihi .....
Command: MLSD
Error: Connection timed out
Error: Failed to retrieve directory listing
I have a router which have 4 ethernet ports(eth0,eth1,eth2,eth3,eth4 ) & One ADSL Line & One USB, I need to configure My router eth3 as a WAN & eth0 as a LAN using iperf, I am going to findout test a my Application(using iptables) whether my application is correct or wrong As of now I configured like server pc1(192.168.1.230)--->eth0(gw)(192.168.1.1)Router--eth3(gw)(192.168.2.1) -->pc2(192.168.2.157). For eth3 as a WAN and eth0 as a LAN. But I am not able to ping between two pc's.
View 1 Replies View RelatedMy father recently installed Ubuntu 9.10 on my new AMD dualcore, but we have not been able to access the net.we tried resetting the modem/router. Windows XP had no problem getting us online - why is it such an issue with Ubuntu?
View 3 Replies View RelatedI cant configure internet connection.
View 3 Replies View RelatedI have tried various rules, like opening port 53 for the DNS with little success. I finally figured that you need to set the source port to 53 and NOT the destination port.However, I have been unable to figure out what ports apt-get requires. The only way I get it to work is to accept everything in iptables.
View 1 Replies View RelatedI have attached the screenshot of the option which I select in Windows for making the same internet broadband connection. I am unable to find the same option in Ubuntu 10.04. Till now I was using the Pppoe Dialup. But now I am unable to configure this one.
View 9 Replies View Relatedi am using fedora (2.6.35.6-45.fc14.i686), i am not able to configure the usb based wireless adapter, its DWA 125(Dlink) uses ra chipset.
lsusb
here is the output
Bus 001 Device 002: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
i have got the driver loaded with the help of modprobe, still unable able to make it right. when i use system-config-network - wireless - no sign of RT2870.
How to install kerberos on a local machine...?
View 2 Replies View RelatedI have a desktop and a laptop. I have Netgear WGR614v9 Wireless Router connected to my desktop. Since my Laptop is pretty old I also bought a Netger Wireless Adapter for the sme model. Now when I connect the Wireless Adapter I am unable to connect to Wi-fi. I am new to Linux, after googling I ran "lsusb" command and it showed Netgear Wireless adapter and its version. Also in GUI when I open File Browser it also shows the Adapter detected but I am unable to connet the same to my router. Also the blue light on the adapter is not glowing.
View 6 Replies View RelatedI have set up a local server for testing on my home network and installed openSSH. I can login using filezilla and SFTP and can even download files. Error messages saying cannot find directory (the directory I am trying to upload)?
Do I need to configure openSSH to allow this. I am using my usual ubuntu login. Maybe I need to set up another user for SFTP.
I could not able to configure the default gateway ip address onto the system. i use the route command (" route add default gw 192.xxx.xxx.xxx eth0 ") to add a default gateway onto the routing table but it is "disappear" in the routing table when i had restart the service network.
View 3 Replies View RelatedI have installed Linux SuSE 10.3 on a PC (Lenovo Thinkstation A58). However, when I start the computer I get the following error message:
"No valid Host_ID or host-name found."
I then use YaST to set up the network. I get the following error message:
"Unable to configure the network card because the kernel device is not present."
The computer has Windows 7 installed and everything seems to work fine. The LED on the Ethernetplug is blinking when using Windows, but not when using Linux. I guess this means that there is no driver for the Ethernet card (Marvell Yukon 88E8057). I have not found any driver for the card and am considering buying a new one. Which PCI card works with SuSE Linux 10.3?
Desktop, laptop, both static IPs, can ping each other no issue. 10.04 LTS.Am attempting to transfer files using Filezilla (which worked when I tried it about two years ago!) and the overall response is 'No route to host'. I have scoured the interwebs and have found no solution. Pretty sure I'm putting in the correct details.
View 9 Replies View RelatedI am a first time Linux user - though I've Unix and Windows experience. So though I can follow your most tech instructions, I'll need some hand-holding.
Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.
Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info, I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).
Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth.
iam new user of linux and im trying to install dns server in fedora 12 and configure dns server by using gui tool.
View 1 Replies View Relatedhow to configure remote server....and how many maximum user loging remotely
View 8 Replies View RelatedI've installed 10.10 server edition on a box I just want to use for file storage/backup, uPnP server, etc. The area I need to put the box doesn't have ethernet as an option so I'm trying to get this wireless NIC configured. It's a Buffalotech WLI2-PCI-G54S which runs the Broadcom 4306 chipset. I've managed to get the drivers for the card installed via the instructions here: [URL]
The drivers are working properly as I can run
Code:
iwlist scan
and see all the wireless networks it detects. I found the info here: [URL] to complete the configuration, but I'm still unable to get it right. My wireless router is configured to use WPA2-PSK with AES. I could just try installing gnome and get the GUI network config, but would like to avoid that if possible.
