Fedora Servers :: Configure Squid Server With SSL?
May 13, 2011
I want to configure squid server with SSL so that users send clear text username/password and also data in encrypted mode. i googled but all of the configuration is for reverse proxy not requests from users to proxy server in LAN for example.
View 5 Replies
ADVERTISEMENT
Jul 27, 2011
I have configured router(192.168.1.2) to serve only one machine with IP - '192.168.1.6' and set up SQUID proxy on '192.168.1.6'. I have defined some rules(ACL) regarding connections to internet on SQUID proxy.
I changed the Gateway of rest of machine (192.168.1.60 - 192.168.1.69) from '192.168.1.2' to '192.168.1.6'.
The policies which I defined in SQUID is working properly but 'Linux Evolution mail' client is not fetching mails.
Is I have to do any other settings on 'Linux System' or 'Evolution mail client'.
View 2 Replies
View Related
May 11, 2010
I have 4 servers running squid/3.1.1 proxy server. Since the latest version I can no longer FTP. I have posted this problem in multiple places but have received almost no response. I've found several other post to this problem throughout the Internet which have also gone unanswered. So, once again, I thought I'd give it a try. As I said "I have 4 servers running the newest version of Squid". When I try to access an ftp, any ftp, I receive an error (check attached image). This was never a problem until just recently. Squid should work perfectly find with ftp, it is not a strictly http proxy.
I turned my firewall off just to make sure, still had the same issue. If I jump directly on the server itself with no proxy settings set in the browser it will work fine. As soon as I set the browser setting to access the Squid software I get the same error. I've included my squid config (which is unchanged from the default settings), maybe somebody better versed than myself can point out an obvious flaw. Everything else seem to work just fine, it's only FTP that's a problem.
View 3 Replies
View Related
Mar 5, 2010
I am using Squid Proxy Server alongwith Dansguardian, dhcp3 and ClamAV on my local network. Everything is working fine except for .flv files like [URL]. The problem is that Squid wants to download the whole .flv file first to its cache and then serve it to the client.
It has an advantage that the whole video loads at once on the client's browser but that is not what our users want.
What they want is that these files load on the fly as they do on a normal internet connection. How do I configure squid to serve .flv files on the fly to the client PCs?
View 9 Replies
View Related
Dec 20, 2010
I am using Red Hat Linux and i want to to configure SQUID server on it. The server has two Lan cards.WAN eth0 192.168.1.200LAN eth1 192.168.1.210 I have a static IP from my ISP. In my private network i have 40 computers running windows xp and fedora ,ubuntu as a destop pc's from range of 192.168.1.10 to 192.168.1.40 In my server computer I can brows internet because it is directly connected with the ISP.For configuring squid should I first make this computer as a gatewat by packet forwarding i.e # echo 1 > /proc/sys/net/ipv4/ip_forwardand then configure for squid server
View 1 Replies
View Related
Aug 5, 2009
I need information to configure squid proxy server in centos 5.3 i need that urgent.
View 1 Replies
View Related
Mar 16, 2010
how-to configure squid proxy server. I still haven't been able to find a solution. I want to set up squid as a open http proxy server. So people from other networks can connect through the proxy without having to login.Do I have to use iptables to reroute http traffic to squids proxy port? I have forwarded the port in my ISP modem so I know thats working, its the squid config that has flaws or iptables locally.
View 1 Replies
View Related
Apr 12, 2011
how do i configure squid proxy server in centos 5.5 final text mode only to block facebook from 9am to 4pm
View 3 Replies
View Related
Mar 13, 2010
I am recently install Linux CentOS 5.3 and configure squid proxy server but when i start squid following messege are display:
Why squid display messege:
View 3 Replies
View Related
Jul 3, 2009
how to configure transparent proxy in squid-3.0-staple16? I install it with source code
View 1 Replies
View Related
Nov 12, 2010
I want to install squid proxy and iptables in ubuntu 10.10 and ip tables.
View 5 Replies
View Related
Jun 11, 2009
can anyone give me the solution how to configure dansguardian on squid transparent proxy.i m using
linux - slackware
squid - squid-2.6-stable18
dansguardian - 2.10.1.1
squid transparent proxy is working properly.
View 2 Replies
View Related
Jun 8, 2009
I am planning to deploy an OpenLDAP server in my LAN for basic authentication, but I have no idea how to do it. I would like to know how to configure an OpenLDAP Server, and I would also like to know about knowledge resources, if any.
View 3 Replies
View Related
Aug 3, 2009
How to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies
View Related
Nov 10, 2010
Is there a way to configure Squid to get the filtering policy from a central policy on a web server.
like squid pointing to [url]
View 1 Replies
View Related
Feb 5, 2010
I like to know how to install/configure mail server in Fedora 11, as I am going to do it first time.
View 3 Replies
View Related
Jul 2, 2010
How to configure DNS server for my small network. In Fedora Linux operating system I want to use Linux as a DNS server for my small office. there are files " /etc/hosts" and "/etc/resolv.conf ".
what is the purpose of these files and in which situation we use these files? For configuring a new DNS server. how can i configure my own DNS server for my small office? Any blog or site in which they show steps to configure DNS server.
View 8 Replies
View Related
Jul 22, 2010
I have setup a squid server on Rhel5.4. I would like to know how I can configure my squid server to block anon proxy sites.
View 3 Replies
View Related
Aug 2, 2011
I am trying to set up a SQUID server on my Red Hat Linux 7.3. to act as a cache server.
The machine has 2 network interface:
eth0 172.30.254.4/23
eth1 172.3.254.65/23
Default gateway is 172.30.254.19/23
The hostname is "amelie".
[Code].....
View 2 Replies
View Related
May 4, 2010
I try for new LTS 10.4 32 bit at home..i install it with squid 2.7stable8 on it..after few hours my squid are freeze...so i have to reboot again and again..it never happen before with hardy. when i look on squid log...i cant find something wrong..but when i check wheter squid running or not.. squid wont auto running on start up..
View 2 Replies
View Related
Jun 24, 2010
Squid servers cache size ondisk automatically increasing and decreasing,how I would resolve this issue
View 6 Replies
View Related
Mar 4, 2009
I am running fedora 10 and webmin squid proxy server, after power failure the squid fails to start. i have tried to start it from command line but failed
[root@ ~]# /etc/init.d/squid start
Starting squid: .................... [FAILED]
[root@ ~]# /etc/init.d/squid reload
[code]....
View 1 Replies
View Related
Apr 30, 2010
I have squid running on F12 fully updated. Pretty much stock config except bigger cache size.
Over time it seems to start lagging and occupying more memory. Currently using ~400Mb after a couple of months. I'm sure its causing some lag / refreshes because if I turn if off and go direct to internet the same site I had to hit refresh on, loads instantly.
Going through the logs in /var/log/squid I don't see anything suspicious with the untrained eye, whats a better way of debugging it to see where/why the delays are happening? Its a single user setup (for fun really lol) so theres a lot of misses in access.log. cache.log just has a handful of bad img headers which does not line up with lagging websites.code...
View 5 Replies
View Related
Mar 14, 2011
I have a reverse proxy set up with squid. I'm going to try and explain what it's doing and I apologize for it being confusing, I'll do the best I can to describe my problem. First, it's for our phone system. We run a ShoreTel Voip system. The owner has decided he wants me to setup MCM (Mobile Call Manager), which from what I can see is an under developed, and almost impossible to get help with Shoretel software. But he's convinced he needs it for his Iphone. It's supposed to, in a nutshell, turn his Iphone into his work phone with all the advantages and doodads that come with it. Apparently, "they have an app for that". On the server side, I need to setup a reverse proxy back into the network on our phone server. Simple enough, I did this with squid. I used the following lines:
Code:
http_port 80 accel defaultsite=172.17.137.7
cache_peer http://172.17.137.7 parent 80 0 no-query originserver name=myAccel
acl our_sites dstdomain http://172.17.137.7
[code]....
Code:
always_direct allow all It most definitely is allowing traffic back to the phone server, the problem is, it hands out my internal server address to the outside client. So for instance, if I connect to the outside routable address with my phone, it will immediately change the url to http://172.17.137.7 which is the inside nat address of my phone server. Which of course doesn't work, since I couldn't browse to that address from the outside. It does however work from the inside of the network, obviously because 172.17.137.7 is accessible from the inside.
View 4 Replies
View Related
Jul 14, 2011
I need the complete reference guide to set up my own SQUID transparent proxy Server with Gateway support. I am using Fedora 14. Please help me with LINKS/REFERENCE. I am a learner in Squid.
View 1 Replies
View Related
Jul 14, 2011
I am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies
View Related
May 23, 2010
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies
View Related
Jan 17, 2011
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies
View Related
May 3, 2010
I've been running denyhosts on Ubuntu 8.04 servers without any problems using the how-to found hereow that I have a new Ubuntu 10.04 server running, I thought I would just install denyhosts from the Ubuntu repository not realizing that the paths and filenames of the install are different from the how-to I am used to using.I figured out what the name of the new denyhosts config file is (at least new to me) and the new location, but I'm not sure about the "allowed-hosts" config file.Does anybody know where the new path for this file is and whether the filename is still the same?
View 2 Replies
View Related
Feb 21, 2011
I have used for a long time Filezilla FTP Server on a windows server, for multiple users in my company around the country.Lately the windows box died and I said let's try ubuntu server 9.10. I configured to my best as a Samba file server and from a speed point of view it works even faster than the Winbox.Now getting to FTP setup, I had the following problem when setting vsftpd.How can I enable more directories for the user, each with its own rights. By example, in Filezilla I had two folders for each user: one was a specific folder in which he could also write, and the other was read-only. They were setup with aliases, so that when user login, he sees one continous list of folders.I tried with symlink, but couldn't do it. Also I searched through the man page but also did not find something specific for this task I would appreciate any help you guys could give me in order to solve this issue, using the best practice for vsftpd. Also note that I am open to other FTP servers as well.
View 1 Replies
View Related