I'm trying to install some nvidia drivers but I need to install the correct headers. uname -r says: 2.6.31-21-serverbut I can't find the headers anywhere to install. 2.6.31-21 and 2.6.31-21-generic are installed but not the server version. It's not showing up in synaptic and using apt-get I get the error message in the title.I have 2.6.31-22-server headers but for some reason when I boot into 2.6.31-22 the OS can't see my 3ware cards and, obviously, the arrays they control. So, I can't use 2.6.31-22 yet.
I had installed Ubuntu server 10.04 and i am trying to install Webmin for GUI. When i start with "sudo apt-get install update" the following gets displayed...
Reading package list... Done Building dependency tree Reading state information... Done E: Couldn't find package updates
I had configured correct IP address and i am connected with internet. After googling for some time i figured out that missing repository could cause such problem, which i am not sure.
I'm newbie in ubuntu and trying to install ffmpeg but there's an error which i couldn't figure out.E: Couldn't find package libmp3lame-devi'm trying somethings according to this article;[URl]
I have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
I did a full install of 9.10 on my Dell Inspirion 1200 laptop & use a Dell 1350 card, after several posts and replies I went to [URL]and followed the instructions for Ubuntu/Debian. This is the result I get....
mike@mike-laptop:~$ sudo apt-get install b43-fwcutter [sudo] password for mike: Reading package lists... Done Building dependency tree
[code]....
I followed this procedure before installation (live CD) and it successfully found and installed the firmware. Apparently it was saved in live CD. What do I need to do?
Linux noob, and I'm trying to install a little program on my rootserver, but it requires libboost and libboost-dev. Unfortunately ubuntu can't seem to find the packages and google does not help either. The only info I found was telling me to install "gnuradio" or something, which takes up 138 mb. So, how can I install these packages now?also: I cancelled the installation of gnuradio via "CTRL+C", will this cause any problems? Are there some trash files left on the system now?
just loaded 9.10 and trying to install the NDIS wrapper so I can use my USB wirless adaptor. Executed the command
sudo apt-get install ndiswrapper-utils-1.9 as read in one of the forums and received the following error:
E: couldn't find package ndiswrapper-utils-1.9
both the tar version and the unzippedversion are on my desktop but I'm not sure they are installed and I don't know what to install. I've clicked every file in every folder most seem to be instructions not what I know as executables.
I've been scratching my head on this one for a while.My level of knowledge of Linux isn't great. I know enough to be dangerous. I'm trying to get Webmin installed to give me an easier web front to Linux. I run the command to get the prereq's.
So I can see that it can't find libnet-ssleay-perl I bit of searching around leads me to the sources.list file which tells apt-get where to get the packages I think. This is as follows.
Quote:
# # deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release amd64 (20080423.2)]/ hardy main restricted #deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release amd64 (20080423.2)]/ hardy main restricted
I'm trying to install libboost-all and libboost-all-dev, but it says the package couldn't be found! Any idea how to install this via putty now? Also, how can I update my cmake to 2.6.x ? it's at 2.4.7
using nvidia_173 driver from repository with nvidia geforce fx5500 sping returns this: Could not set video mode: Couldn't find matching GLX visual would installing nvidia-glx-173 package be the solution? just realized i had the nvidia_173 driver activiated, but not in use. ran "sudo nvidia-xconfig" boots in tty1, so i navigated to the X11 directory and deleted xorg.conf, boots to gnome now
how do i keep it from going to tty1? i know there are threads on this here and there, but most leave you with the default driver, and i want to keep nvidia_173
My conky weather doesnt show any thing and I already got my Partner ID , License Key and Location ID and I tried to run the command below to install ConkyForecast: sudo apt-get update && sudo apt-get install conkyforecast
But I have got this error : E: Couldn't find package conkyforecast and I dont know what to do , Can you guys tell me what should I do ?
i have installed this Ubuntu in virtual-box running in windows xp. my INTERNET connection is working fine but i m using proxy for that. my problem is that when i want to install something through sudo apt-get install xxxx(whatever) it gives error "Couldn't find package".
Example: #sudo apt-get install wine Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package wine
I am not able to install linux key logger on my ubuntu 10.04 is my os this is the result that i got user36@lib-desktop:~$ sudo apt-get install lkl Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package lkl user36@lib-desktop:~$
I've ubuntu 9.04..I want to insall the latex package how should i do?? i tried sudo apt-get install latex-beamer "E: Couldn't find package latex-beamer"
i tried to make my desktop 3d so i type in terminal following command sudo apt-get install compiz-fusionbut it give the error "Couldn't find package compiz-fusion" why dis error comes plz tell me how to solve it i am a new user for ubuntuHow to install the required package Please tell me exextly what i have to it
i tried to make my desktop 3d and whan use command in terminal it tells couldt find package compiz-fusioni dont know for which package it is saying .. m new user for linux so dont know what is package meant for ow to get dis package for 3d desktop
I had installed apache previously on my system, and I think I uninstalled it completely, although remnants might have remained. I have just installed zend server ce php 5.3, and I am having trouble getting it to work. When I log in to the admin interface, it told me it couldn't start the webserver, so I go to restart apache, and it gives me this:* Starting web server apache2 Syntax error on line 6 of /etc/apache2/sitesenabled/zendserver_gui.conf:Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configurationThis has to do with php_mod some how... but I am not sure how to fix this, or where to start, since I am relatively new to actually setting up apache.I thought this might have something to do with libapache2-mod-php... so I went to reinstall it, and ran this:
mburns@mb2449-laptop:~$ sudo aptitude install libapache2-mod-php5 Reading package lists... Done Building dependency tree
I Recently set up a dedicated server using CentOS as a new Linux wing of my Web services hosting business. To provision online varios Tucows services (names, blogs etc.) I need to use the Perl API provided by Tucows/OpenSRS. The API requires various extra perl modules including XML::Parser - without which the API will not function.
I was able to add with PPM to my Windows servers no problem but it will not install in CentOS.
As best I can tell the cause may be missing headers and libs for the c compile of Expat - required to build XML::Parser so after days of hunting I found your repository holds package expat-devel which claims to hold libs and headers for Expat similar to libexpat1-dev on other dists. I used YUM with success but although 3 libs were installed no headers were installed.
Is there a reason these headers are not included? I have downloaded them manually but am afraid of breaking something. Is there a reason I should not attempt to install with these headers? Is CentOS capable of using the Parser modules?
I am trying to install kcachegrind and during the ./configure phase I got the following error: Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following: ./configure --with-qt-includes=/usr/lib64/qt4/include but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
Search the forums first. Well I did, can't find anything I understand. So please help an ignoramus in simple terms. The problem:- I'm trying to run vmware workstation and I get a desktop box pop up which says "Kernel .heade4s for version 2.6.37.1-1.2 desktop not found" How do I find them and install please.
For some reason I am unable to find a DHCP Server package for Fedora 14 using yum. Does anyone know what I should be searching for or even a .rpm that can be used?
I am trying to install a piece of software that uses an install.pl script which looks to /usr/src/linux/include/ for my kernel headers...but it never finds them or that directory/link.
I've run "yum install kernel-devel kernel-headers" so I am pretty sure they are installed.