I'm trying to install libboost-all and libboost-all-dev, but it says the package couldn't be found! Any idea how to install this via putty now? Also, how can I update my cmake to 2.6.x ? it's at 2.4.7
View 11 Replies
Linux noob, and I'm trying to install a little program on my rootserver, but it requires libboost and libboost-dev. Unfortunately ubuntu can't seem to find the packages and google does not help either. The only info I found was telling me to install "gnuradio" or something, which takes up 138 mb. So, how can I install these packages now?also: I cancelled the installation of gnuradio via "CTRL+C", will this cause any problems? Are there some trash files left on the system now?
View 1 Replies View RelatedI'm trying to install Semantik 0.7.3 on OpenSUSE 11.2 and having difficulties with the dependencies. Here's the last message my terminal spit out on my attempt to start building:
--A whole bunch of stuff the forum apparently won't let me post because it thinks it's URLs and I'm too new--
error: could not open /usr/share/kde4/apps/cmake/modules/KDELibsDependencies.cmake
--End
I'd had some problems with dependencies on the way to this message and installed gcc and g++ successfully to solve them. But now it's telling me can't find KDELibsDependencies.cmake. I've checked it out - it's not in the directory. After installing cmake, I'm kind of at the end of my wits - I just don't know where to look further.
Another hint that seems to be connected with it: As I was trying to install rkward 0.5.3 (also today) it had problems with cmake too:
CMake Error at /usr/share/cmake/Modules/FindKDE4.cmake:84 (MESSAGE):
ERROR: cmake/modules/FindKDE4Internal.cmake not found in
/home/erget/.kde4/share/apps;/usr/share/kde4/apps;/etc/kde4/share/apps
Call Stack (most recent call first):
[Code]....
When I type this command ;sudo apt-get install build essentialI got this ;
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]...
I had installed Ubuntu server 10.04 and i am trying to install Webmin for GUI.
When i start with "sudo apt-get install update" the following gets displayed...
Reading package list... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package updates
I had configured correct IP address and i am connected with internet. After googling for some time i figured out that missing repository could cause such problem, which i am not sure.
I'm newbie in ubuntu and trying to install ffmpeg but there's an error which i couldn't figure out.E: Couldn't find package libmp3lame-devi'm trying somethings according to this article;[URl]
View 7 Replies View RelatedI have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
View 5 Replies View Related#uuname -a Linux 2.6.18-194.3.1.el5 #1 SMP Sun May 2 04:17:42 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
# apt-get update
Reading Package Lists... Done
Building Dependency Tree... Done
# apt-get upgrade
Reading Package Lists... Done
Building Dependency Tree... Done
0 upgraded, 0 newly installed, 0 removed and 0 not upgraded. # apt-get install sun-java6-jdk Reading Package Lists. Building Dependency Tree. E: Couldn't find package sun-java6-jdk
# apt-get install aptitude
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package aptitude
I have centos 5.3.I couldn't find git package in any of the yum repositories. Is there a package location, version you would recommend.
View 1 Replies View RelatedCode:
$ uname -a
Linux MyBox 2.6.28-17-generic #58-Ubuntu SMP Tue Dec 1 21:27:25 UTC 2009 x86_64 GNU/Linux
[code]...
I did a full install of 9.10 on my Dell Inspirion 1200 laptop & use a Dell 1350 card, after several posts and replies I went to [URL]and followed the instructions for Ubuntu/Debian. This is the result I get....
mike@mike-laptop:~$ sudo apt-get install b43-fwcutter
[sudo] password for mike:
Reading package lists... Done
Building dependency tree
[code]....
I followed this procedure before installation (live CD) and it successfully found and installed the firmware. Apparently it was saved in live CD. What do I need to do?
Debian linux:
I've tried apt-get install with the following packages:
And others and always get 'Couldn't find package'.
I tried doing an apt-get update and that worked without problem.
just loaded 9.10 and trying to install the NDIS wrapper so I can use my USB wirless adaptor. Executed the command
sudo apt-get install ndiswrapper-utils-1.9 as read in one of the forums and received the following error:
E: couldn't find package ndiswrapper-utils-1.9
both the tar version and the unzippedversion are on my desktop but I'm not sure they are installed and I don't know what to install. I've clicked every file in every folder most seem to be instructions not what I know as executables.
I've been scratching my head on this one for a while.My level of knowledge of Linux isn't great. I know enough to be dangerous. I'm trying to get Webmin installed to give me an easier web front to Linux. I run the command to get the prereq's.
Quote:
sudo apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Reading package lists... Done
[code]....
So I can see that it can't find libnet-ssleay-perl I bit of searching around leads me to the sources.list file which tells apt-get where to get the packages I think. This is as follows.
Quote:
#
# deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release amd64 (20080423.2)]/ hardy main restricted
#deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release amd64 (20080423.2)]/ hardy main restricted
[code]....
using nvidia_173 driver from repository with nvidia geforce fx5500 sping returns this:
Could not set video mode: Couldn't find matching GLX visual would installing nvidia-glx-173 package be the solution? just realized i had the nvidia_173 driver activiated, but not in use. ran "sudo nvidia-xconfig" boots in tty1, so i navigated to the X11 directory and deleted xorg.conf, boots to gnome now
how do i keep it from going to tty1? i know there are threads on this here and there, but most leave you with the default driver, and i want to keep nvidia_173
My conky weather doesnt show any thing and I already got my Partner ID , License Key and Location ID and I tried to run the command below to install ConkyForecast: sudo apt-get update && sudo apt-get install conkyforecast
But I have got this error : E: Couldn't find package conkyforecast and I dont know what to do , Can you guys tell me what should I do ?
My error was and still is
Code:
error while loading shared libraries: libboost_thread-mt.so.1.38.0: cannot open shared object file: No such file or directory
I updated repositories from this Launchpad user
https://launchpad.net/~pkg-games/+archive/ppa/+packages
-> boost1.38 - 1.38.0-6ubuntu2~hardy1
[Code]...
I get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal
[code]...
I'm trying to install some nvidia drivers but I need to install the correct headers. uname -r says: 2.6.31-21-serverbut I can't find the headers anywhere to install. 2.6.31-21 and 2.6.31-21-generic are installed but not the server version. It's not showing up in synaptic and using apt-get I get the error message in the title.I have 2.6.31-22-server headers but for some reason when I boot into 2.6.31-22 the OS can't see my 3ware cards and, obviously, the arrays they control. So, I can't use 2.6.31-22 yet.
View 9 Replies View Relatedi tried to make my desktop 3d so i type in terminal following command sudo apt-get install compiz-fusionbut it give the error "Couldn't find package compiz-fusion" why dis error comes plz tell me how to solve it i am a new user for ubuntuHow to install the required package Please tell me exextly what i have to it
View 1 Replies View Relatedi have installed this Ubuntu in virtual-box running in windows xp. my INTERNET connection is working fine but i m using proxy for that. my problem is that when i want to install something through sudo apt-get install xxxx(whatever) it gives error "Couldn't find package".
Example:
#sudo apt-get install wine
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package wine
I am not able to install linux key logger on my ubuntu 10.04 is my os this is the result that i got user36@lib-desktop:~$ sudo apt-get install lkl Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package lkl user36@lib-desktop:~$
View 9 Replies View RelatedI've ubuntu 9.04..I want to insall the latex package how should i do?? i tried sudo apt-get install latex-beamer "E: Couldn't find package latex-beamer"
View 5 Replies View Relatedg++4.4.3 has already been installed in Ubuntu 10.04. However, g++-3.3 is needed to compile a stupid source code (g++-4.4.3 does not work out).
[Code]....
Other g++ versions, including g++-4.1, g++-4.2, g++-4.3, and g++-4.4, are available. Why g++-3.3 is not on the list.....
i tried to make my desktop 3d and whan use command in terminal it tells couldt find package compiz-fusioni dont know for which package it is saying .. m new user for linux so dont know what is package meant for ow to get dis package for 3d desktop
View 2 Replies View RelatedI am attempting to compile some code on a cluster where I do not have root access (and is missing many of the libraries I want), and hence have had to create local builds of the boost and opencv libraries (i.e. in /home/username/usr/local). In particular, my cmake depends on:
Code:
find_package(boost)
which my normal development machine finds in:
Code:
/usr/share/cmake-2.6/Modules/FindBoost.cmake
On the cluster I have a version of FindBoost.cmake at:
Code:
/home/username/cmake_modules
How can I tell CMake to look for FindBoost.cmake in that directory, since neither the cmake file, nor the boost install is in the standard location? I've modified the FindBoost.cmake file to make it search in the locally installed boost libraries.
[code]....
I'm trying to install Kicad from source but cmake gives me an error:"- Check for installed OpenGL -- not foundCMake Error at CMakeModules/CheckFindPackageResult.cmake:6 (message): OpenGL was not found - it is required to build Kicad "I have an Nvidia video card with the proprietary drivers installed.I also have glut, (glutg3) installed.I don't understand why cmake can't find OpenGL.
View 9 Replies View RelatedI've tried installing all packages that look like they have anything to do with GTK, but CMake still says "Some or all of the gtk libraries were not found. (missing: GTK2_GLIBCONFIG_INCLUDE_DIR)" and the build fails. What do I need to do to fix this?
P.S.: I'm running Natty. I couldn't find a board for problems with Natty, which is why I posted this here. If such a board exists, and you're a moderator/admin
My problem is: CMake can't find OpenSceneGraph package,in spite the fact that it is installed. I tried re-installing it with yum,Furthermore, I do not even know where it is installed, but if I did, I might set up some environment variables to help CMake find it.I for it, and what I found are some libraries in /usr/lib64/, but only regarding osgdb (a part of osg), and directory /usr/lib64/osgPlugins-2.8.2, again filled with files prefixed with osgdb_ and osgWrapper_.Background:I have set up Fedora 11 system in a virtual machine(vbox), in order to be able to use valgrind for memory leak hunting on my project. This project is configured with CMake from the start - so it should be portable. osg is one of the used libraries - and now it makes problems. When I tried uninstalling osg with yum, osgdb_ libs remained behind. If I can completely remove osg, I can download source and compile it and install it by myself - I will try this if no one knows where osg gets installed.
View 2 Replies View RelatedI'm trying to install .tar.bz2 app. When I run cmake I get this error message:
Code:
-- Found KDE 4.4 include dir: /usr/include
-- Found KDE 4.4 library dir: /usr/lib
-- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler
-- Found automoc4: /usr/bin/automoc4
CMake Error at /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:70 (MESSAGE):
Could NOT find ZLIB (missing: ZLIB_LIBRARIES ZLIB_INCLUDE_DIRS)
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindZLIB.cmake:39 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
CMakeLists.txt:15 (find_package)
Configuring incomplete, errors occurred!
