I'm newbie in ubuntu and trying to install ffmpeg but there's an error which i couldn't figure out.E: Couldn't find package libmp3lame-devi'm trying somethings according to this article;[URl]
I had installed Ubuntu server 10.04 and i am trying to install Webmin for GUI. When i start with "sudo apt-get install update" the following gets displayed...
Reading package list... Done Building dependency tree Reading state information... Done E: Couldn't find package updates
I had configured correct IP address and i am connected with internet. After googling for some time i figured out that missing repository could cause such problem, which i am not sure.
I have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
I did a full install of 9.10 on my Dell Inspirion 1200 laptop & use a Dell 1350 card, after several posts and replies I went to [URL]and followed the instructions for Ubuntu/Debian. This is the result I get....
mike@mike-laptop:~$ sudo apt-get install b43-fwcutter [sudo] password for mike: Reading package lists... Done Building dependency tree
[code]....
I followed this procedure before installation (live CD) and it successfully found and installed the firmware. Apparently it was saved in live CD. What do I need to do?
Linux noob, and I'm trying to install a little program on my rootserver, but it requires libboost and libboost-dev. Unfortunately ubuntu can't seem to find the packages and google does not help either. The only info I found was telling me to install "gnuradio" or something, which takes up 138 mb. So, how can I install these packages now?also: I cancelled the installation of gnuradio via "CTRL+C", will this cause any problems? Are there some trash files left on the system now?
just loaded 9.10 and trying to install the NDIS wrapper so I can use my USB wirless adaptor. Executed the command
sudo apt-get install ndiswrapper-utils-1.9 as read in one of the forums and received the following error:
E: couldn't find package ndiswrapper-utils-1.9
both the tar version and the unzippedversion are on my desktop but I'm not sure they are installed and I don't know what to install. I've clicked every file in every folder most seem to be instructions not what I know as executables.
I've been scratching my head on this one for a while.My level of knowledge of Linux isn't great. I know enough to be dangerous. I'm trying to get Webmin installed to give me an easier web front to Linux. I run the command to get the prereq's.
So I can see that it can't find libnet-ssleay-perl I bit of searching around leads me to the sources.list file which tells apt-get where to get the packages I think. This is as follows.
Quote:
# # deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release amd64 (20080423.2)]/ hardy main restricted #deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release amd64 (20080423.2)]/ hardy main restricted
I'm trying to install libboost-all and libboost-all-dev, but it says the package couldn't be found! Any idea how to install this via putty now? Also, how can I update my cmake to 2.6.x ? it's at 2.4.7
using nvidia_173 driver from repository with nvidia geforce fx5500 sping returns this: Could not set video mode: Couldn't find matching GLX visual would installing nvidia-glx-173 package be the solution? just realized i had the nvidia_173 driver activiated, but not in use. ran "sudo nvidia-xconfig" boots in tty1, so i navigated to the X11 directory and deleted xorg.conf, boots to gnome now
how do i keep it from going to tty1? i know there are threads on this here and there, but most leave you with the default driver, and i want to keep nvidia_173
My conky weather doesnt show any thing and I already got my Partner ID , License Key and Location ID and I tried to run the command below to install ConkyForecast: sudo apt-get update && sudo apt-get install conkyforecast
But I have got this error : E: Couldn't find package conkyforecast and I dont know what to do , Can you guys tell me what should I do ?
Can't export an mp3 file from Audacity because it can't find libmp3lame.so. I have:- clicked the Audacity Download button on the error window- installed lame using Synaptic- installed lame, liblame0, liblame-dev and libmp3lame0 using apt-getall as per various forum suggestions. Still can't find anything like libmp3lame.so or .so.0 on my (8.04) system.
I'm trying to install some nvidia drivers but I need to install the correct headers. uname -r says: 2.6.31-21-serverbut I can't find the headers anywhere to install. 2.6.31-21 and 2.6.31-21-generic are installed but not the server version. It's not showing up in synaptic and using apt-get I get the error message in the title.I have 2.6.31-22-server headers but for some reason when I boot into 2.6.31-22 the OS can't see my 3ware cards and, obviously, the arrays they control. So, I can't use 2.6.31-22 yet.
i have installed this Ubuntu in virtual-box running in windows xp. my INTERNET connection is working fine but i m using proxy for that. my problem is that when i want to install something through sudo apt-get install xxxx(whatever) it gives error "Couldn't find package".
Example: #sudo apt-get install wine Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package wine
I am not able to install linux key logger on my ubuntu 10.04 is my os this is the result that i got user36@lib-desktop:~$ sudo apt-get install lkl Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package lkl user36@lib-desktop:~$
I've ubuntu 9.04..I want to insall the latex package how should i do?? i tried sudo apt-get install latex-beamer "E: Couldn't find package latex-beamer"
i tried to make my desktop 3d so i type in terminal following command sudo apt-get install compiz-fusionbut it give the error "Couldn't find package compiz-fusion" why dis error comes plz tell me how to solve it i am a new user for ubuntuHow to install the required package Please tell me exextly what i have to it
i tried to make my desktop 3d and whan use command in terminal it tells couldt find package compiz-fusioni dont know for which package it is saying .. m new user for linux so dont know what is package meant for ow to get dis package for 3d desktop
E: Malformed line 59 in source list /etc/apt/sources.list (dist parse) E: The list of sources could not be read. Go to the repository dialog to correct the problem. E: _cache->open() failed, please report.
these are are errors i got when i try to open synaptic package manager! this is the list:
I'm new to linux, have been somewhat of a computer geek my whole life and thought it about time that I delved into the world of linux. So I installed ubuntu 10.04 on my computer. I love it. However, I can't get my wireless to work. In my dorms there are no ethernet hookups, so I have to use the wireless. I typed "sudo lshw -class network" into the root terminal. The important things that I figured out was the bus info: pci@0000:4:06.0 and the pysical id: 6 (not sure if the physical id is important but it sounds like it is). I then did a lspci and found that at bus 04:06.0 it is a RaLink Device 3060. I downloaded the .tar file for the driver. I could not find instructions for it online so I followed the ones for the rt2860 driver : [URL].... I could not get it to work, It built ok and installed ok, but when I do the modprobe I get an error saying the device or resource is busy. Either that or that it cannot be found. One thing that I found weird was that I couldn't get it to build a 3060 driver, it would only build a 3562 one.
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
When I try to play some OpenGL games, I get this error.How can I fix this? My graphics card is Nvidia, and I use the nvidia-current driver.Here's what it says under OpenGL/GLX Information. I don't know if this is the info you need, but oh well.
i'm trying to make a script that gives one output if a directory in /home is older than one month, and another if the directory is less than one month old. I looked around and saw that the creation date for directories isn't stored, or at least i couldn't find it? How is this possible to do then?
Distro: Ubuntu 11.04-beta1 'natty' Problem: 'your hardware does not support Unity; you will be using Ubuntu Classic.' Installed: nvidia-common 0.2.28, nvidia-current 270.30-0ubuntu3, nvidia-settings 270.29-0ubuntu1, linux-image-generic-pae 2.6.38.7.21, linux-headers-generic-pae 2.6.38.8.22
[Code]....
After reading a few other threads on the matter, I suspect the problem is with the 'nvidia-current' package more than the libgl1-mesa-glx or unity packages. ... though it does seem odd that Unity doesn't have a non-OpenGL verison.
If I find a solution, I'll come back. I hope the answer isn't "ditch nvidia-current for the binary install script from nVidia direct." If someone found this thread in a search, the nVidia driver install scripts can be found at [URL]