After compiling the linux kernel VMware is unable to compile it's modules.
I installed the kernel source to code...
C header files matching your running kernel where not found
Any ideas how to solve?
I've installed F13. Installer has set:
kernel-PAE-2.6.33.3-85.fc13.i686
kernel-headers-2.6.33.6-147.fc13.i686
Installation of VMware Workstation was ok, but at first launch it ask me for path of
kernel-headers-2.6.33.3 Why I have different versions of kernel and kernel-headers? How can I make working VMware? Installation of kernel-headers 2.6.33.3 from package-manager seems impossible.What is the path to specify kernel-headers for VMware?
I've been trying to install Vmware Workstation and keep getting an error about Kernel Headers missing! Although I am pretty sure I have the headers installed for my system. It's looking for the PAE version of my headers which I believe it doesn't exist!
View 13 Replies View RelatedI am trying to install a piece of software that uses an install.pl script which looks to /usr/src/linux/include/ for my kernel headers...but it never finds them or that directory/link.
I've run "yum install kernel-devel kernel-headers" so I am pretty sure they are installed.
My "rpm -qa | grep kernel" returns code...
What am I missing?
I am trying to install vmware and i am getting an error:
Code:
Unable to build the vmmon module.
I guess they are not in /usr/src/linux/include (I also tried /usr/src/linux-2.6.29.6/include).
2.6.18-194.8.1.el5xen is the reported kernel that I'm running while the headers that are installed are listed as 2.6.18-194.8.1.el5-i686. I assume these are the same, or at least close enough that it shouldn't matter.
However, when I run vmware-config-tools.pl to configure it it says it cannot find the kernel headers. I've tried pointing it to /usr/src/2.6.18-194.8.1.el5-i686/ and /usr/src/2.6.18-194.8.1.el5-i686/include (not sure which of the two I'm supposed to do as online instructions contradict one another) it says that is invalid and there seems to be no way to force it since it just complains without letting me use it anyway. What can I do? Running centos 5 btw on vmware workstation 7.
I installed VMWare WorkStation 7.x.x . When It started that I have taken "Kernel Header" error and It want to enter path of Kernel. I tried many commands ;
yum -y gcc kernel header
uname -r
2.6.18-238.19.1.el5xen
rpm -qa kernel-devel
kernel-devel-2.6.18-238.19.1.el5
Actually, It uses same kernel but VMWare is not working. I searched about Kernel Headers error when run VMWare on Internet. But I couldn't solve my problem.
I have installed OpenSUSE 11.3 64 bit and want to install VMWare workstation 7.1. I have run the install script for VMWare without any issues. When I start the VMWare Workstation I get a window saying this: Before you can run VMWare, several modules must be compiled and loaded into the running kernel. Kernel Headers 2.6.34-12-desktop Kernel headers for version 2.6.34-12-desktop were not found.
View 9 Replies View RelatedI've just upgraded to Ubuntu 10.010 - Maverick Meerkat.
Launching VMWare Player 3.1.2 I get the message: "Before you can run VMWare, several modules must be compiled and loaded into running kernel".
I click ok, but there are problems recompiling VMCI sockets.
The effect is that my windows image starts, but then crashes.
Do you have some suggestions to solve the problem ? Or is it only a problem of compilation with the new 10.10 kernel, not yet available for VMWare?
I am running a vmware on a 64 bit fedora 9. I have already installed kernel header, but the vmware could not find the kernel header, and ask to input the kernel header path. I added /usr/include to the vmware, it complained not a right kernel header.
View 1 Replies View RelatedSearch the forums first. Well I did, can't find anything I understand.
So please help an ignoramus in simple terms.
The problem:-
I'm trying to run vmware workstation and I get a desktop box pop up which says "Kernel .heade4s for version 2.6.37.1-1.2 desktop not found"
How do I find them and install please.
I have installed workstation 7 and installed f12 in it. I have tried to install the tools but it cant find the headers. I have the latest kernel 2.6.31.6-166 PAE and installed the headers and devel. I have pointed the the path to /lib/modules/2.6.31.6-166.fc12.i686.PAE/build/include and /usr/src/kernel/2.6.31.6-166-fc12.i686.PAE/include and it wont take any.I have searched google and the forums and all i find is you need to install the devel and headers which i've done.
View 3 Replies View RelatedI'm trying to use module-assistant to add the vboxdrv using instructions also found here in the debian forum. However, m-a can't find the linux-headers because it looks for the package linux-headers-2.6.32-5-trunk-686. I attempted to specify were the headers were by using:
m-a prepare --kernel-dir /usr/src/linux-headers-2.6.32-5-686/
but also doesn't work. Instead, I get the error:
Bad kernel version specification at /usr/bin/m-a line 566.
Anyone knows how to work around this?
By the way, the reason I am doing this is because when I installed virtualbox (following the instructions in debian wiki) there's no vboxdrv. When I try to modprobe it, I get:
FATAL: Module vboxdrv not found.
What's the command for installing kernel headers for the currently installed kernel?
View 2 Replies View RelatedI just installed a fresh CentOS 5.2 32bit system. I used "The Perfect Server" server document from Howtoforge and went through those steps and then added Webmin administration console. I then tried to install VMware Workstation 6.5 onto the system. I downloaded the latest VMware bundle, ran it and everything went fine. I then try to run vmware and I get the following messages
C header files matching your running kernel were not found
Before youcan run VMware Workstation, several modules must be compiled and loaded into the running kernel
Kernel Headers 2.6.18-92.1.22.el5.centos.plusPAE
Kernel headers for version 2.6.18-92.1.22.el5.centos.plusPAE were not found. If you installed them in non-default path you can..
I am running 32 bit 2.6.32-26-generic-pae #47-Ubuntu SMP Wed Nov 17 16:14:46 UTC 2010 i686 GNU/Linux
Every time Update Manager updates the Kernel, the kernel and it's associated source code is upgraded, but the LINUX-HEADERS for the associated kernel are not updated.
This is a problem because without the updated linux-headers, my Nvidia drivers fail to recompile and load. A PIA. I then have to go to Synaptic Package Manager, find the appropriate linux-headers for the new kernel version, install it, reboot, and then Nvidia drivers load and function again.
Something is obviously messed up here. I likely caused the problem thus:
On first install of Ubuntu 10.04 LTS on this machine, it installed with the generic kernel. It saw/found the Nvidia drivers and loaded them OK (I may have had to do some Nvidia installs via Synaptic; I don't recall). My machine has more than 4GB ram, and I noticed it was not using nearly all of it. I researched and found the solution was to switch to the PAE kernel, which I did. Ever since then at every kernel upgrade, the Linux-headers fail to update, and have to be updated manually for Nvidia to function.
Now that I know what the issue is, it's not a big deal. However, Update Manager should know I need the Linux-Headers and upgrade them at every kernel update. How can I insure this happens auto-magically like the rest of this fine and beautiful KickAss OS?
I've installed Vmware Workstation and tried to run it only to have the following appear;
Kernel Headers 2.6.27.25-170.2.72.fc10.i586
Kernel headers for version 2.6.27.25-170.2.72.fc10.i586 were not found. If you installed them in a non-default path you can specify the path below etc.......
I've tried to search and find the kernel headers but can't find them.
Does anyone know the kernel-headers location, or how to determine that location, in Fedora 13? I'm installing vmware-tools and it's prompting for it. /usr/include/ and /usr/include/linux/ were revealed to have many header files, as shown by doing rpm -ql kernel-headers
However the installer rejected these locations. My only guess as to why is because they're not where the currently-running kernel has them. I also tried /usr/src/kernels/(kernelversion).fc13.i686/include/ with no luck...
Where do I obtain this? I have the i586 kernel and I need the i686 kernel to run VMware. I beleive this may be the pottential reason virtualbox wasn't working too.
View 13 Replies View Relatedwhere you only get offered the kernel-headers for 2.6.35.11-83 by yum but not the kernel or the kernel-devel? I tried yum clean all and both pointing to the baseurl and mirrorlist and it does the same thing for both. Oddly my other laptop with F14 in the wireless cafe showed all three packages were available.
View 2 Replies View RelatedI'm building a Kernel on System A to use on System B. I've followed the walkthrough on [URL], and I get the following rpms:
kernel-debuginfo-common-i686-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-firmware-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-debuginfo-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-devel-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-debuginfo-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-devel-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
What I don't get are any
kernel-headers-<version>.<arch>.rpm
Files. Don't I need them to rebuild modules and drivers on System B? Otherwise, how should I copy my new headers to System B? BTW, System B crashes when I try to build the Kernel on it, that's why I'm building debugger Kernels on System A.
Where are the kernel headers for the current kernel of F12KDE? I am trying to configure VMWare player on my machine, and on initial startup I got an error message.
View 3 Replies View Relatedfrom what I understand kernel-devel does not bring in ALL the header files for install modules. so what i would like to know is how to install true headers instead of using kernel-devel. I found one tutorial, but it was way out of date.
View 3 Replies View RelatedThe problem is that I need to use kernel headers like <linux/interrupt.h>. However, those files do not exist in folder /usr/include/linux. Thus, compilation fails. On the other hand, the files exist in folder /usr/src/kernels/2.6.30.10-105.2.4.fc11.i586/include/linux.
How can I get the missing headers into proper place in /usr/include/? I even tried coping, but extra files are then needed and so on.
I tried to use "make menuconfig", but I couldn't see a missing configuration I need.
I also tried to use " yum install kernel-devel". This tells me "Package kernel-devel 2.6.30.10-105.2.23.fc11.i586 already installed and latest version Nothing to do".
Last night at 1:47 AM yum installed the current version of kernel-headers on my RHEL5 server:
Mar 17 01:47:47 linux1 yum: Updated: kernel-headers-2.6.18-164.15.1.el5.i386
Mar 17 13:47:22 linux1 syslogd 1.4.1: restart.
This locked the server up until I could physically get to it this afternoon and reboot the server. I then finished downloading and installing the new kernel, rebooted again, and the server appears to be running fine.
This is the second time this has happened on this server.
Has anyone else seen this problem when you setup yum to automatically update your servers? Other than manually updating servers, does anyone have any suggestions on how to keep this problem from happening again?
I've been working on this problem for two nights, googled a lot, but still no luck. I'm working on Fedora 14, here's my kernel version
Code:
[root@terran /]# uname -r
2.6.35.12-88.fc14.x86_64
and I've booted from this kernel, I've installed the same kernel-headers:
Code:
[root@terran /]# yum install kernel-headers
[Code]...
Make menuconfig doesn't find ncurses headers on my system, howerver ncurses-devel package is installed. I get the following error message:
Code:
make menuconfig
*** Unable to find the ncurses libraries or the
[code]...
Trying to get the kernel source ...
rpm -ivh kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm
error: open of kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm failed: No such file or directory
rpm -ivh kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm
No package kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm available.
What am I doing wrong?
The best word that suits me to introduce is I am a novice! :-) but it is the difficult part get over with the new things and learnings!
Well once such situation made me introduce me to you is "Kernel Crash". I've recently installed Fedora 14 64 bit version on my HP HDX premium series, since then this Kernel crash is chasing me down! code...
I have a problem to install the VMware Server (VMware-server-2.0.2-203138.x86_64.rpm) on "Fedora 13 Desktop Edition 64-bit".I traied all tips I found, but nothing was OK.Please look my linux configuration and the error messages:
(VMware installation)
[root@localhost BKP]# rpm -Uvh VMware-server-2.0.2-203138.x86_64.rpm
Preparing... ########################################### [100%]
1:VMware-server ########################################### [100%]
The installation of VMware Server 2.0.2 for Linux completed successfully.Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
code....