Ubuntu :: Scanner Driver For Brother MFC-665CW?

May 18, 2010

During installation of Ubuntu 10.04, there was no driver found for my Brother MFC-665CW printer/scanner. However, I recently learned on the Forum that there is a printer driver available for the MFC-665CW through Synaptic that can be accessed by searching on printer name. I got it, and it works great. I've not been successful in locating a driver for the scanner part of the MFC-665CW. Does anyone know if there is a driver available on Synaptic that will work for the scanner on a MFC-665CW, and if so how to get to it (i.e., what to search on to locate it)?

View 3 Replies


ADVERTISEMENT

Fedora :: Scanner Driver For Brother DCP385C - Invalid Argument

Mar 23, 2011

My Brother DCP385 Printer/Scanner goes alright Printing but will not Scan. I keep getting this message: 'brother3:bus3:dev1': invalid argument. My OS is Fedora 14. Brother seems to only go up to Fedora 12 in their driver page . There is no mention of Fedora 14 .

Pentium 4, 80Gb HDD, 1Gb Ram

View 1 Replies View Related

Fedora :: Driver For Brother DCP385C Scanner - Invalid Argument

May 22, 2011

I have been looking through Brother drivers and can get the drivers for Brother DCP385C printer and scanner but the scanner will not work . It keeps telling me "failed to open device - 'Brother3:bus3;dev1':invalid argument" . I have looked into the Brother site but it does not tell me what to do for Fedora 14 . It only goes up to Fedora 12.

View 1 Replies View Related

Ubuntu :: Can't Use Scanner On Brother DCP 7020

Mar 7, 2010

I'm using 9.10 on x86 architecture. I've searched the forums and anything related to scanning talks about editing /etc/udev/rules.d/45-libsane.rules which doesn't seem to exist on my system. Judging from the dates most of these posts probably relate to intrepid or jaunty. XSane just says 'no devices available'. Printing works fine.

View 6 Replies View Related

Ubuntu :: Installing A New Brother Printer+scanner?

Jun 16, 2010

About a week ago I installed my first Linux (Ubuntu 10.04). Since then I've been trying to get my printer to work by following some of the instructions on the web.Unfortunately,as a newbie, I can't seem to get it right... The printer is - Brother DCP-135C.

View 4 Replies View Related

Ubuntu :: Brother Inkjet Printer & Scanner Failed

Oct 12, 2010

I have a Brother MFC-240C inkjet printer & scanner. On installation of Maverick Meerkat v. 10.10, my scanner function failed. I added the same line into the file as for Lucid Lynx v. 10.04 and the scanner has scanned perfectly. The lines Brother gives are for the following file: Ubuntu 9.10, 10.04

1. Open "/lib/udev/rules.d/40-libsane.rules" file.
2. Add the following two lines to the end of the device list. (Before the line "# The following rule will disable ..."):

# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"

above is found at: [URL]

View 6 Replies View Related

Hardware :: Brother MFC-8670DN -- Scanner Not Working In Ubuntu 9.04?

May 11, 2009

I just installed an all-in-one Brother MFC-8670DN in Ubuntu 9.04. The printing works great but I cannot get the scanner recognized. I tried brscan, brscan2 and brscan3 from the Linux section of the Brother website to no avail. Previously had a lower model Brother MFC working fine. I called Brother and they said that "I need to call Linux for help with the scanner." Anyone who can help with the Brother MFC-8670DN? It would be very much appreciated. This printer may go back to the store if I cannot get the scanner working in Ubuntu 9.04.

View 3 Replies View Related

Fedora Installation :: Brother Scanner Won't Work In 13

Jul 12, 2010

Have a Brother MFC-9440CN the Scan function of which operated perfectly in Fedora 11. Have upgraded to Fedora 13, now when the Scanner Tool is activated (XSane .997) an error message is returned "Error during CMS conversion. Could Not open scanner ICM profile: (null)". Has anyone had and solved this problem, I have tried everything identified on the Brother web site. The scanner works perfectly when accessed through the Simple Scan application.

View 1 Replies View Related

Fedora Hardware :: Brother Scanner Not Detected By 14?

Nov 16, 2010

Just upgraded from Fedora 13 to 14. My network Brother MFC-9440CN will not operate (worked fine in F13). Error message from both Simple Scan and Scanner Tool (xsane) states "No devices available".

View 14 Replies View Related

Hardware :: Brother Scanner Not Being Recognized In Fedora 11?

Oct 15, 2009

I have a Brother MFC-7345 Printer/Scanner and I got the printer working but the scanner won't work. I've installed all the drivers from Brother and followed all their instructions but still nothing. sane-find-scanner gives me

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

[code]....

and scanimage -L gives me No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Hardware :: Using Brother Scanner (MF) Under Non-root In Debian?

Mar 12, 2010

There is a problem with scanning on Brother multifunctional under Debian Squeeze/Sid. I get things smooth and good under root (both scanimage and xsane), but under user it gives

Code:

scanimage: open of device brother3:bus6;dev1 failed: Invalid argument Obviously as under root works fine, lsusb has no problems with detection.

Code:

Bus 005 Device 010: ID 04f9:01ea Brother Industries, Ltd

Already fixed /etc/fstab:

Code:

none /proc/bus/usb usbfs auto,devmode=0666 0 0

but it is useless anyway. I had already used the scanner under simple user in ubuntu and it all worked.

View 2 Replies View Related

Ubuntu :: Brother Scanner MFC-6490CW - Not Working After Upgrade To Natty 11.04

May 27, 2011

I have a Brother MFC-6490CW network Scanner. Had it installed and working great in Gutsy. Upgraded to Natty 11.04 the other day, and the scanner stopped working. Printing is still ok. When I try to open a scanning program I get:

"No Devices Found"

I tried reinstalling the drivers, no luck.

View 4 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Fedora Hardware :: Brother DCP 7030 - Scanner Does Not Work

Sep 27, 2010

I have a DCP 7030 multifunction printer. I have installed all proprietary drivers from Brother (printer an scanner drivers). [1] Printing works but unfortunately both Simple-scan and X-Sane do not recognize the scanner. Brother provides some scanner settings [2] - but unfortunately not for Fedora 13. I have tried the settings for Fedora 12 but they do not work. [URL]

View 1 Replies View Related

Fedora Hardware :: Get Scanner Working In Brother DCP-385C - Error During Device I/O

Sep 1, 2009

I have recently installed Fedora11 and have managed to get the printer side of the above multifunction machine working but not the scanner . The computer recognises the scanner and sane, xsane, sanelib's etc are all installed . When I try to open it it gives the following:

Failed to open device 'brother3:bus5;dev1': Error during device I/O

View 6 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Ubuntu :: Brother MFC 7220 Printer - Driver Fail?

Aug 22, 2010

Anybody else using this printer? I have tried the driver direct from Brother, requires cups and the driver.Both installed, both fail. I read on another forum to try a Brother HCL type and it works, but why?

View 3 Replies View Related

Ubuntu :: Force Install Brother DCP7040 32-bit Driver On 10.10?

Feb 21, 2011

I just installed Maverick 64-bit on my new Satellite AMD 4-core laptop. I've run into an issue with the fact that Brother does not have a 64-bit driver for my Multi-Function Laser printer. They recommend force installing the 32-bit driver. I have made sure that all the 32-bit library and all the folders exist per Brothers instructions. However, I'm confused on what command I need to type in the terminal window to actually do the install. Can someone recommend the proper command to force install the 32-bit driver? Or should I download the source code and compile? I don't know the proper method for compiling a 64-bit driver either.

View 3 Replies View Related

Ubuntu :: How To Download Brother MCF-495CW Printer Driver

May 6, 2011

I'm trying to download this driver with my UBUNTU 11.04 but theres so many steps I'm not sure I'm doing it right. I downloaded SUSE but I dont know how to get it to run. I'm also in the process of downloading Cups But I don't know what to do with that either.

View 1 Replies View Related

General :: Driver For Printer Brother HL-2140 To Be Used With Ubuntu 9.10?

Mar 18, 2010

Is there a driver for the Printer Brother HL-2140 to be used with Ubuntu 9.10. and how to install.

View 1 Replies View Related

Hardware :: Good Driver For Brother Printers?

Feb 21, 2011

Does Linux have a good driver for Brother Printers?

I am about to use Ubuntu Netbook and Ubuntu Studio. The Printer is about two years old.

View 7 Replies View Related

Ubuntu Installation :: Brother Printer Driver MFC-7340 On Computer

Feb 18, 2010

I do not know much about Ubintu...My bro put it on my computer. I'm trying to connect a new Brother MFC-7340 to the computer but cannot get the drivers to install, as I do not understand how to even check the version of Ubuntu that I have.

View 1 Replies View Related

Hardware :: Ubuntu 9.04 64bit And Brother Dcp-7030 Cannot Install Driver?

Apr 13, 2010

Purchased a brother dcp-7030 laser printer after reading very positive web review/forum comments stating drivers were available from brother site. Unable to install cupswrapper driver successfully. Created /usr/share/cups/model directory as directed (and also a /usr/share/cups/dcp-7030 directory in case I hadn't quite understood the instructions) and then installed cupswrapper brother progs via synaptic. Cannot find a 7030 driver to install. Tried installing the driver from the brother site, but after downloading the .deb version and trying to install it, I get a wrong architecture msg. Checked and I have the 32 bit dependencies installed, which the brother site states are required.

View 7 Replies View Related

General :: Cannot Find A Driver For The Brother MFC-490CW Printer

Jan 11, 2011

I cannot find a driver for the Brother MFC-490CW printer anywhere. I tried using the CD that came with the printer itself but that doesn�t have any PPD files on there... Apparently they deemed it unthinkable that a Linux user might want to use their equipment.

View 14 Replies View Related

Ubuntu Installation :: Driver Brother 9840 Causing Synaptic Error?

Nov 7, 2010

I just used a Brothers script to install driver for my new printer MFC-9840cdw and now Synaptic will not open at all, giving following error message:QUOTEE: The package mfc9840cdwlpr needs to be reinstalled, but I can't find an archive for it.E: Internal error opening cache (1). Please report.END QUOTEWhat can I do to get Synaptic to work again, because I read it is the best way to install these drivers. I would like to uninstall the printer and start over using Synaptic.

View 4 Replies View Related

Debian :: Sqeeze Xfce Need Driver For Brother InelliFAX-2820

Feb 26, 2011

I have searched the WEB cannot find a driver, trying to print a document via USB.If I could find the specifics I could write a driver, though I have not done that kind of work for years.

View 5 Replies View Related

OpenSUSE Multimedia :: Brother HL-2130 Printer Driver Not Found?

Jul 22, 2011

Friend got a Brother HL-2130 Printer and couldn't add printer using Yast as the drivers are not found by Yast.

I went to Brother Solutions Center : Brother Driver for Linux Distributions and downloaded the drivers provided by Brother.

rpm -ivh *.rpm

and everything works well.

How could we prompt the developers to update openSUSE so that these working drivers can be added into Yast to benefit future users.

View 2 Replies View Related

Debian Hardware :: Using The Squeeze Has Gotten The DCP-8065 Driver From The Brother Website To Work?

Feb 9, 2011

I would like to know if anybody using Squeeze has gotten the DCP-8065 driver from the Brother website to work. I am running x64 and have followed the directions precisely (ia32-libs, etc.) but still no dice. I have been using the ubuntu version (brother-cups-wrapper-laser & its dependencies) and that works fine. I just want to know if anybody has gotten this to work and what they did that may have been different from the directions given.

View 2 Replies View Related

Debian Hardware :: Compile Driver For Laser Printer Brother HL1110 For AMD64

Mar 31, 2015

I have bought a BrotherHL-1110 laser printer. But there is no driver on my system. I have downloaded source code but don't understand how to compile it. (

It does only exist driver-packages for 32 bits: hl1110cupswrapper-3.0.1-1.i386.deb and hl1110lpr-3.0.1-1.i386.deb)

My system is:
Release 7.8 (wheezy) 64-bit
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
AMD Athlon(tm) II X2 245 Processor × 2

The source code contain the following files:
-> pwd
/home/joe/Desktop/BrotherHL-1110/hl1110cupswrapper-GPL_src-3.0.1-1

-> ls -R
.:
brcupsconfig Copying filter PPD

[Code] ....

How do I compile and install it on my computer ? ( Or get the printer working ? )

View 7 Replies View Related

Ubuntu :: EPSON Stylus SX400 Scanner Driver?

Jul 11, 2010

I currently have an EPSON Stylus SX400 that I've connected to my Dell Desktop running Ubuntu Lucid Linux. Though Ubuntu installed the printer at a great speed , it didn't install the scanner. Where can I get drivers to install the scanners, all the software I use do not discover a device?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved