I cannot find a driver for the Brother MFC-490CW printer anywhere. I tried using the CD that came with the printer itself but that doesn�t have any PPD files on there... Apparently they deemed it unthinkable that a Linux user might want to use their equipment.
View 14 Replies
Is there a driver for the Printer Brother HL-2140 to be used with Ubuntu 9.10. and how to install.
View 1 Replies View RelatedAnybody else using this printer? I have tried the driver direct from Brother, requires cups and the driver.Both installed, both fail. I read on another forum to try a Brother HCL type and it works, but why?
View 3 Replies View RelatedI'm trying to download this driver with my UBUNTU 11.04 but theres so many steps I'm not sure I'm doing it right. I downloaded SUSE but I dont know how to get it to run. I'm also in the process of downloading Cups But I don't know what to do with that either.
View 1 Replies View RelatedFriend got a Brother HL-2130 Printer and couldn't add printer using Yast as the drivers are not found by Yast.
I went to Brother Solutions Center : Brother Driver for Linux Distributions and downloaded the drivers provided by Brother.
rpm -ivh *.rpm
and everything works well.
How could we prompt the developers to update openSUSE so that these working drivers can be added into Yast to benefit future users.
I do not know much about Ubintu...My bro put it on my computer. I'm trying to connect a new Brother MFC-7340 to the computer but cannot get the drivers to install, as I do not understand how to even check the version of Ubuntu that I have.
View 1 Replies View RelatedI have bought a BrotherHL-1110 laser printer. But there is no driver on my system. I have downloaded source code but don't understand how to compile it. (
It does only exist driver-packages for 32 bits: hl1110cupswrapper-3.0.1-1.i386.deb and hl1110lpr-3.0.1-1.i386.deb)
My system is:
Release 7.8 (wheezy) 64-bit
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
AMD Athlon(tm) II X2 245 Processor × 2
The source code contain the following files:
-> pwd
/home/joe/Desktop/BrotherHL-1110/hl1110cupswrapper-GPL_src-3.0.1-1
-> ls -R
.:
brcupsconfig Copying filter PPD
[Code] ....
How do I compile and install it on my computer ? ( Or get the printer working ? )
I cannot find the driver for my HP Designjet Z3200 . Do you know where I can look for most of the linux drivers?
View 2 Replies View RelatedI have an HP Designjet z3200ps but I cannot find a linux driver for it. What should I do now ?
And I'm also wondering if the linux driver for etc device is not developed, what should the Linux gurus do ?
I just rescued an old Lexmark Z35 and have been trying to find the file CJLZ35LE-CUPS-2.0-1.TAR.GZ. All the links I've found in this forum and Google seem to be broken. Does anyone know where can I find them? I have a Lexmark x5250 too, which I haven't been able to use in Ubuntu. I've heard there's a way to make it work.
View 9 Replies View RelatedI want to install HP Laser Jet 2430 driver on linux. For this purpose i contacted HP support but according to them they don't have the driver of this printer for linux.
View 4 Replies View RelatedI am using Xubuntu. I had trouble finding driver for this peace of hardware. Only what I've managed to do is installing OKI ML 320 driver (witch is already build in system), and print a few lines of text mixed with random characters.
View 2 Replies View RelatedI have a Triumph-Adler DC-2316 printer and I can't find the appropriate driver to make it work. I tried some Generic drivers but nothing worked.
View 1 Replies View RelatedI am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.
View 2 Replies View RelatedThis site has drivers for my new Brother HL-3040CN laser printer ... but it says its the wrong architecture when I try to open the first one with GDebi Package Installer. I'm kind of stuck now ...should I try just plugging the printer into the computer with the network cable and seeing if Ubuntu will automatically take care of drivers? For reference I saw this topic when I googled the issue [URL] This site says 64 bit drivers are available for Ubuntu 9.10, only 32 bit drivers are available for Ubuntu 10.04. I am running 10.04 (64bit) ... should I return the printer?
View 6 Replies View RelatedI had it printing until the last cups upgrade. Brother support thinks it is something to do with the upgrade. We did a reinstall of the printer driver. The printer works on Virtual Box and the scanner works on Ubuntu, but not the printer. What do I need to have the printer work under 11.04?
View 9 Replies View RelatedAbout a week ago I installed my first Linux (Ubuntu 10.04). Since then I've been trying to get my printer to work by following some of the instructions on the web.Unfortunately,as a newbie, I can't seem to get it right... The printer is - Brother DCP-135C.
View 4 Replies View RelatedI need to direction here: my laptop (F10 gnome) is cat5 dhcp connected to a dlink 524 router with IP 192.168.150.1. This in turn is connected to an arris modem with ip 216... Local IP is 192.168.100.1 (default). It works, connects to internet, supplies dhcp address to dlink. All this is upstairs in my ham room upstairs. My wifes laptop downstairs usually connects wirelessly to the dlink, and hence to the arris. Also works to the internet. There is a linksys (ddwrt software) running as a wireless repeater also located downstair, with box ip 192.168.1.1.
It is "joined" to the dlink router via wireless, hence it function, wireless repeater. It works, I have used it like this many time. However, I cannot seem to get a connection to the Brother printer (which has a print server function). It is connected to the linksys repeater via a lan cable. Gets an ip via dhcp. I think it should work, since my wife can connect to the linksys repeater, either wireless or wired, and surf the internet thru the dlink router via the repeater-dlink wireless repeater link. I must be missing something obscure (to me, at least).
After a fresh installation of F15, my Brother HL-2030 printer does not work anymore (means it worked fine with previous Fedora versions). As usual, I downloaded the proprietary drivers from the Brother home-page [1] and installed them. Then, I configured the driver in my browser ('localhost:631'). The printer was correctly recognised (connection via USB). Printing the test page worked fine, but now, as usual user and as root, too, I am not able to print for example with Abiword, Gedit, Sylpheed and other applications.
Strangely, using Firefox, I am able to print for example the Fedora forum or Distrowatch homepage, or some on-line newspaper articles, but I am not able to print a local HTML page (for example [2]). Furthermore, when trying to print a document in Abiword or Sylpheed, the printer warms up, but it does not print. I've attached '/var/log/cups/error_log' (LogLevel debug). (The 'HL2030' diver was added automatically, and I removed it because it did not find any PPD file. The correct printer is called 'brother_hl-2030'.)
I upgraded from Karmic to Lucid RC a couple of days ago and have been trying to work through a few problems since. One of these problems is printing with my Brother DCP506CN printer which was working in Karmic. However, I just can't seem to get it going in Lucid. I have followed the Brother linux install procedure, which worked for the the last few Ubuntu releases, but not for this one it seems.
View 3 Replies View RelatedI have read the threads and have downloaded the 4 drivers/files from the brothers site and installed them.. but still can not get my USB cabled printer to work what am I missing I am running Ubuntu 10.04 sounds like brother is not the printer to have in case their is no fix what brands of printers are best for compatibility?
View 1 Replies View RelatedI have a Brother MFC-240C inkjet printer & scanner. On installation of Maverick Meerkat v. 10.10, my scanner function failed. I added the same line into the file as for Lucid Lynx v. 10.04 and the scanner has scanned perfectly. The lines Brother gives are for the following file: Ubuntu 9.10, 10.04
1. Open "/lib/udev/rules.d/40-libsane.rules" file.
2. Add the following two lines to the end of the device list. (Before the line "# The following rule will disable ..."):
# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"
above is found at: [URL]
I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies View RelatedI am unable to print on my Brother mcf 440cn printer. Every thing was working ok, today I finished some work in Open Office and could not print the saved file. I get an error unable to print msg. my printer is no longer recognized on the system. I reinstalled the driver no luck. I tested the printer with Windooze and every thing works fine
View 4 Replies View RelatedI cannot modify my printer in Cups. In the past when I wanted to add a printer, or modify an installed printer, I clicked on the Admin tab, and I get a prompt to enter a password. I never get the prompt to enter user - root and the root password. So I can not add a printer, or modify one that is installed. My Brother HL-2040 is still working, I can print jobs O.K. it will not print test page. Why do I care? I want to have a better understanding of the location on the lpr and cupswrapper drivers on this system.
I have installed Slackware 13.1 on a second drive, and am trying to convert to that system. In 13.1 cups asks me for Admin user and password, I can enter root + password, and add a printer, and Mandy used to. However, in 13.1 after converting the .rpm files to .tgz files and installing them with pkgtool, I can not 'see' the lpr or cupswrapper driver in 13.1. I wanted to see what it looked like in Mandriva, however I can't and don't know why.
I have a Brother MFC3360C printer that I would like to use. Has anyone had any success getting this printer working.? I've had it working on Fedora and Mandriva in the past but haven't been able to get it going on slackware. Printer setup recognizes it correctly but It's not in the list of available drivers for it and Brother only has 32 bit drivers for Deb and .rpm on their website, no 64bit.
View 6 Replies View RelatedIt has worked in several releases 7.10 8.04 8.10 9.04 but stopped working in 9.04. I have tried everything (to long to list) need some bullet proof help!
View 1 Replies View RelatedI'm trying to install Brother DL-5250DN laser network printer. I have read the manual at [URL] and also I have searched the forum but I didn't find a solution yet. The problem is that I don't know what is the printer type that I have to select. None of the description really match for this printer. It is a printer which is directly connected to the network and *not* to a Linux or Windows machine. The only type that matches is AppSocket/HP JetDirect. I tried to cinfigure it with CUPS but it doesn't work. After I type the password nothing happens.
View 2 Replies View RelatedI have Fedora 11 and am trying to install Brother HL-2170W Wireless laser printer. I installed it and used CPUS but cannot print. SELinux is enabled. On Brothers site there is an FAQ about SELinux and CUPS. [URL] I followed these instructions but still cannot print. Jobs get queued. Under Printer properties -> Policies, there is an Enabled checked. For some reason when I check this Enabled box and click Apply, the changes do not take effect. Then Enabled checkbox gets uncheck again.
I cannot even print a test page as its status shows Pending.
How can I access this printer so that I can print my documents?? I am new to Fedora and I have no knowledge of CUPS but I want to be able to acces my wireless printer. When I go to printer section in preferences, I am not able to find my wireless printer.
View 2 Replies View Related
